October 14, 20159 yr Are you guys able to adjust core multi with oc board plugged directly into mobo? No, doesn't work. Says so in the guide as well.
October 14, 20159 yr Superb, checked the manual but not the guide. Never got a cable with mine so waiting patiently for the post...
October 14, 20159 yr Author Superb, checked the manual but not the guide. Never got a cable with mine so waiting patiently for the post... If you didn't got cable you need to check with your reseller, it should be include in the bundle with any retail board.
October 15, 20159 yr Superb, checked the manual but not the guide. Never got a cable with mine so waiting patiently for the post... Â You can use the HOTKEY function, it basically gives you the OC Dashboard on your keyboard. Â
October 15, 20159 yr Yeah, Pepi, gave MSI uk a shout and a new ones in the post. Thanks Bruno, just dawned on me last night and put it to good use. Is the OC board a little quicker changing the clocks?
October 15, 20159 yr Hotkey is slow, well, from memory using ROC panel on z87/x79. Still good enough though.
October 18, 20159 yr Are you guys able to adjust core multi with oc board plugged directly into mobo? Â Â I have done it. 52-53 Â Â Â That issue rebooting sounds like what i told the jumper is for
October 20, 20159 yr Quick question, how much is the difference between BIOS DRAM voltage & DRAM Voltage measured from a proper quality DMM, on this board.
October 20, 20159 yr At 1.9v BIOS I'm 1.906v on MM. Thanks, so BIOS & real voltage is pretty much the same.
October 20, 20159 yr Anyone else have crucial ballistix 2400 16-16-16-39 1.2v sticks they can test? I just tried setting this board up with them and i had some terrible posting issues and the bios was not loading correctly.  Just want to make sure its the sticks and nothing else. Swapped mfr in and its fine but that issue was after i had it turned off or in hibernate mode for a day  These sticks http://imgur.com/ENUjaHa Edited October 20, 20159 yr by Random
October 20, 20159 yr Those Crucial sticks are Micron and are likely junk (in case you were wondering).
October 20, 20159 yr i know they are junk but I had a clearance issue with a cooler and I don't plan On ocing this board for a while
October 20, 20159 yr It would be a shame not to put that chip on cold asap. Should be cb 6.1 minimum!
October 20, 20159 yr Since I suck I am not going to freeze the cpu with ln2. Probably just gonna sell it and loose money on it. Edited October 24, 20159 yr by Random
October 21, 20159 yr Author Anyone else have crucial ballistix 2400 16-16-16-39 1.2v sticks they can test? I just tried setting this board up with them and i had some terrible posting issues and the bios was not loading correctly. Just want to make sure its the sticks and nothing else. Swapped mfr in and its fine but that issue was after i had it turned off or in hibernate mode for a day  These sticks http://imgur.com/ENUjaHa  This kit is on the QVL list and has been validated up to 4 DIMM, so it isn't BIOS related: http://msi.com/product/motherboard/support/Z170A-XPOWER-GAMING-TITANIUM-EDITION.html#support-mem  http://msi.com/product/motherboard/support/Z170A-XPOWER-GAMING-TITANIUM-EDITION.html#support-ocmem Edited October 21, 20159 yr by pepinorang
October 24, 20159 yr Well since i swapped in my hynix stick i havent had any issues.. not sure what else it could be.
October 29, 20159 yr Hi , I tested 1 kit of 4x4 go ripjaws V 3466 mhz c16 on MSI z170A xpower and Asus m8 hero . It boots with xmp profile and 1T on Asus board but not on the xpower .(need 2T)
October 30, 20159 yr Author Hi , I tested 1 kit of 4x4 go ripjaws V 3466 mhz c16 on MSI z170A xpower and Asus m8 hero .It boots with xmp profile and 1T on Asus board but not on the xpower .(need 2T) Â Already checking this since last reports from you guys, thanks for the feedback!
October 31, 20159 yr Hi , I tested 1 kit of 4x4 go ripjaws V 3466 mhz c16 on MSI z170A xpower and Asus m8 hero .It boots with xmp profile and 1T on Asus board but not on the xpower .(need 2T) Â Same here. MSI Gaming M5, latest bios. Â 1) HyperX Predator 4x4, 3000 XMP Profile1, boot only with 2T, whatever VccSA, I/O and ram voltage applied. 2) G.Skill Ripjaws V, 2x4, 3600, boots only with 2T.
October 31, 20159 yr Try an older BIOS version. I guess they changed something in September/October, 1T doesn't work for me either with all the new Gaming M7 BIOS versions.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.