Rauf Posted October 14, 2015 Share Posted October 14, 2015 Are you guys able to adjust core multi with oc board plugged directly into mobo? No, doesn't work. Says so in the guide as well. Quote Link to comment Share on other sites More sharing options...
Doug2507 Posted October 14, 2015 Share Posted October 14, 2015 Superb, checked the manual but not the guide. Never got a cable with mine so waiting patiently for the post... Quote Link to comment Share on other sites More sharing options...
pepinorang Posted October 14, 2015 Author Share Posted October 14, 2015 Superb, checked the manual but not the guide. Never got a cable with mine so waiting patiently for the post... If you didn't got cable you need to check with your reseller, it should be include in the bundle with any retail board. Quote Link to comment Share on other sites More sharing options...
Bruno Posted October 15, 2015 Share Posted October 15, 2015 Superb, checked the manual but not the guide. Never got a cable with mine so waiting patiently for the post... Â You can use the HOTKEY function, it basically gives you the OC Dashboard on your keyboard. Â Quote Link to comment Share on other sites More sharing options...
Doug2507 Posted October 15, 2015 Share Posted October 15, 2015 Yeah, Pepi, gave MSI uk a shout and a new ones in the post. Thanks Bruno, just dawned on me last night and put it to good use. Is the OC board a little quicker changing the clocks? Quote Link to comment Share on other sites More sharing options...
Bruno Posted October 15, 2015 Share Posted October 15, 2015 i haven't used the HOTKEY but i wouldn't think so. Quote Link to comment Share on other sites More sharing options...
Doug2507 Posted October 15, 2015 Share Posted October 15, 2015 Hotkey is slow, well, from memory using ROC panel on z87/x79. Still good enough though. Quote Link to comment Share on other sites More sharing options...
Random Posted October 18, 2015 Share Posted October 18, 2015 Are you guys able to adjust core multi with oc board plugged directly into mobo? Â Â I have done it. 52-53 Â Â Â That issue rebooting sounds like what i told the jumper is for Quote Link to comment Share on other sites More sharing options...
rtsurfer Posted October 20, 2015 Share Posted October 20, 2015 Quick question, how much is the difference between BIOS DRAM voltage & DRAM Voltage measured from a proper quality DMM, on this board. Quote Link to comment Share on other sites More sharing options...
Doug2507 Posted October 20, 2015 Share Posted October 20, 2015 At 1.9v BIOS I'm 1.906v on MM. Quote Link to comment Share on other sites More sharing options...
rtsurfer Posted October 20, 2015 Share Posted October 20, 2015 At 1.9v BIOS I'm 1.906v on MM. Thanks, so BIOS & real voltage is pretty much the same. Quote Link to comment Share on other sites More sharing options...
Doug2507 Posted October 20, 2015 Share Posted October 20, 2015 Near enough but only way to confirm is with MM. Quote Link to comment Share on other sites More sharing options...
Bruno Posted October 20, 2015 Share Posted October 20, 2015 1.72V in BIOS, 1.719V on MM. Quote Link to comment Share on other sites More sharing options...
Random Posted October 20, 2015 Share Posted October 20, 2015 (edited) Anyone else have crucial ballistix 2400 16-16-16-39 1.2v sticks they can test? I just tried setting this board up with them and i had some terrible posting issues and the bios was not loading correctly.  Just want to make sure its the sticks and nothing else. Swapped mfr in and its fine but that issue was after i had it turned off or in hibernate mode for a day  These sticks http://imgur.com/ENUjaHa Edited October 20, 2015 by Random Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted October 20, 2015 Share Posted October 20, 2015 Those Crucial sticks are Micron and are likely junk (in case you were wondering). Quote Link to comment Share on other sites More sharing options...
Random Posted October 20, 2015 Share Posted October 20, 2015 i know they are junk but I had a clearance issue with a cooler and I don't plan On ocing this board for a while Quote Link to comment Share on other sites More sharing options...
Doug2507 Posted October 20, 2015 Share Posted October 20, 2015 It would be a shame not to put that chip on cold asap. Should be cb 6.1 minimum! Quote Link to comment Share on other sites More sharing options...
Random Posted October 20, 2015 Share Posted October 20, 2015 (edited) Since I suck I am not going to freeze the cpu with ln2. Probably just gonna sell it and loose money on it. Edited October 24, 2015 by Random Quote Link to comment Share on other sites More sharing options...
pepinorang Posted October 21, 2015 Author Share Posted October 21, 2015 (edited) Anyone else have crucial ballistix 2400 16-16-16-39 1.2v sticks they can test? I just tried setting this board up with them and i had some terrible posting issues and the bios was not loading correctly. Just want to make sure its the sticks and nothing else. Swapped mfr in and its fine but that issue was after i had it turned off or in hibernate mode for a day  These sticks http://imgur.com/ENUjaHa  This kit is on the QVL list and has been validated up to 4 DIMM, so it isn't BIOS related: http://msi.com/product/motherboard/support/Z170A-XPOWER-GAMING-TITANIUM-EDITION.html#support-mem  http://msi.com/product/motherboard/support/Z170A-XPOWER-GAMING-TITANIUM-EDITION.html#support-ocmem Edited October 21, 2015 by pepinorang Quote Link to comment Share on other sites More sharing options...
Random Posted October 24, 2015 Share Posted October 24, 2015 Well since i swapped in my hynix stick i havent had any issues.. not sure what else it could be. Quote Link to comment Share on other sites More sharing options...
nvidiaforever2 Posted October 29, 2015 Share Posted October 29, 2015 Hi , I tested 1 kit of 4x4 go ripjaws V 3466 mhz c16 on MSI z170A xpower and Asus m8 hero . It boots with xmp profile and 1T on Asus board but not on the xpower .(need 2T) Quote Link to comment Share on other sites More sharing options...
pepinorang Posted October 30, 2015 Author Share Posted October 30, 2015 Hi , I tested 1 kit of 4x4 go ripjaws V 3466 mhz c16 on MSI z170A xpower and Asus m8 hero .It boots with xmp profile and 1T on Asus board but not on the xpower .(need 2T) Â Already checking this since last reports from you guys, thanks for the feedback! Quote Link to comment Share on other sites More sharing options...
Guest george.kokovinis Posted October 31, 2015 Share Posted October 31, 2015 Hi , I tested 1 kit of 4x4 go ripjaws V 3466 mhz c16 on MSI z170A xpower and Asus m8 hero .It boots with xmp profile and 1T on Asus board but not on the xpower .(need 2T) Â Same here. MSI Gaming M5, latest bios. Â 1) HyperX Predator 4x4, 3000 XMP Profile1, boot only with 2T, whatever VccSA, I/O and ram voltage applied. 2) G.Skill Ripjaws V, 2x4, 3600, boots only with 2T. Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted October 31, 2015 Share Posted October 31, 2015 Try an older BIOS version. I guess they changed something in September/October, 1T doesn't work for me either with all the new Gaming M7 BIOS versions. Quote Link to comment Share on other sites More sharing options...
Guest TheMadDutchDude Posted November 1, 2015 Share Posted November 1, 2015 Did 1T work previously, Sam? I may give it a try on the TE I have here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.