ASRock Z170M OCF funhouse

[GtiJason]

Just scooped up a i3 6300, 3800mhz stock and if I raise bclk multi drops to 37, any idea what I'm doing wrong? C states off, tried on and with/out EIST and Turbo

 

Bios L1.21A

Microcode 74

[Strong Island]

That chip sounds pretty bad. I'd say 4.7-5.0 air then go cold

 

If your chip can go 5g and atleast 1.5v or less and hwbotprime stable, i'd say go go on ln2

 

Here's my chip 1 out of 3

 

cool thanks guys, I know that's been the case in general with skylake, was just hoping for a miracle, but this one is the worst chip I have ever really tested on air, dont really have enough money to bin a lot, but I got another 6100 to test tonight.

 

I really want to finally use this board but just no great chips, might finally invest in binned chip.

 

Wow dj that cpu looks amazing, so jealous, haha

[GtiJason]

Hey guys, has anyone tested an i3 on air that was terrible but ended up being ok on ln2. The new chip I got barely did 4.3 hwbot prime on air maxed out. Is it worth trying on ln2? My good i3 does 4.8 hwbot prime air and 6.1 ln2. Was just hoping someone had a dog on air that ended up being good

 

Your good i3 does 4.8 HWBPrm on air, what is the vcore? Is this factoty sealed ihs or delidded, sorry so many questions just trying to guage if my i3 6300 is worth delidding. Just tested HWBPrm and it passes 4900mhz with 1.46-1.465v Full Win 7 64bit on AIO stock lid. Id imagine 5.0g is doable (1.485v failed) but chip runs crazy hot even stock and probably needs 1.515v to get there.

[Guest barbonenet]

Nice Guide bro!

 

These are my setting:

 

::Cold Bug Killer Settings

LLC 1

1.65 VCORE

1.4 VCCIO

1.25 VCCSA

1.651 CPU PLL Voltage

1.4 VCCPLL

AUTO ColdBugKillerVolt

AUTO DMI Voltage

 

in windows after -150

 

1.95 VCORE

1.4 VCCIO

1.25 VCCSA

1.651 CPU PLL Voltage

1.4 VCCPLL

2.405v ColdBugKillerVolt

1.651v DMI Voltage

 

no CB

 

About RTLs, they will change when we change cooling from air to ln2, will be a step or two tighter.

 

Amazing board

Edited May 3, 2016 by barbonenet

[Strong Island]

Your good i3 does 4.8 HWBPrm on air, what is the vcore? Is this factoty sealed ihs or delidded, sorry so many questions just trying to guage if my i3 6300 is worth delidding. Just tested HWBPrm and it passes 4900mhz with 1.46-1.465v Full Win 7 64bit on AIO stock lid. Id imagine 5.0g is doable (1.485v failed) but chip runs crazy hot even stock and probably needs 1.515v to get there.

 

I think it was probably around 1.45v. To be honest I had already delidded it and I had paste on there for ln2 clocking and I made the gap a little bigger with tape so I'm pretty sure my temps were terrible for air so its probably a bad chip to compare to.

 

From now on I will test before delidding, but the 4.8 chip does 6.1hwbot prime. I only have 6.0 on profile but it passed at 6.1 but I ran out of ln2 and the save file crashed.

 

http://hwbot.org/submission/3172637_strong_island_hwbot_prime_core_i3_6320_5554.24_pps

 

See for me it's different. If I can only get 2 chips then I will try them on ln2 no matter what they do on air. I don't have a huge selection so I cant really be picky and it really only takes a couple liters to do a full mhz test on i3 for hwbot prime.

 

Either way that sounds like an awesome chip and if it scales like mine it should easily do 6.0+

Edited May 3, 2016 by Strong Island

[Splave]

What do they do r15 at voltage wise for 4.5ghz

[GtiJason]

What do they do r15 at voltage wise for 4.5ghz

 

My 6300 passes hwb prime at 45x 1.255v but R15 needed around 1.275v

[Splave]

that seems decent I have a couple more to try, on air seems VID means nothing on these babies maybe because the cache is the limiting factor?

[rivaldokfc]

hi guys, is that easy to run 4000 1t on the matx ocf? what's the key setting to get 1t?

[Splave]

there are no special tricks, its just does it might need slightly higher vdimm but nothing else.

[rivaldokfc]

there are no special tricks, its just does it might need slightly higher vdimm but nothing else.

 

 

 

or maybe my kit is not good enough...i set 2.0v but still not boot..

[xxbassplayerxx]

Try lower as well. B-Die doesn't always enjoy lots of volts.

[GtiJason]

or maybe my kit is not good enough...i set 2.0v but still not boot..

 

I've tried 5 kit's of B die on MOCF, all of them have been waza stable 4000 c12 1t and 49/50/6/6 rtls. The biggest thing is they all need different voltages. Obviously dram v (1.785-1.9v bios) but sa and io is different on all of them (sa volt 0.250-0.350) (io volt 0.200-0.350)

[Guest Bullant]

You guys can try 49-49 rtls too,just start at 3866 with rtls,iols @ 49-49-6-5 and blck up to what ever your limit is,not sure on its full eff but worth testing it on xtu as well for those guy that can only do say 3900mhz.Same thing if imc not up to it try little cold on CPU

 

With cl12 twcl9^

Edited May 4, 2016 by Bullant

[rivaldokfc]

finally got my kit finished pi 32m@4000c12 1t and also could do waza. but 4000 12-11-11 is still hard to finish 32m...

 

 

从我的 iPhone å‘é€ï¼Œä½¿ç”¨ Tapatalk

[rivaldokfc]

one new issue...when i do copy waza, one of my kit got bluescreen even i push the volt. to 2.0v while this kit can boot at 1.85v and finish 32m without waza. what's wrong with it?[emoji29][emoji29]

 

 

从我的 iPhone å‘é€ï¼Œä½¿ç”¨ Tapatalk

[xxbassplayerxx]

Likely need to tune the other volts. Termination, IO, SA.

[Splave]

Some just can't wazza. I have a set that does 4133 12-11-11-28 bit can't do wazza over 3866

[rivaldokfc]

Some just can't wazza. I have a set that does 4133 12-11-11-28 bit can't do wazza over 3866

 

 

 

that is one of the biggest tragedy of the earth*-*

[xxbassplayerxx]

Yeah... B-Die is cool... but don't you dare try to run it with Maxmem over 600MB lol.

 

64-Bit? GTFO. This is 2016, who needs more than a few hundred megs of memory anyway!

[TaPaKaH]

Some just can't wazza. I have a set that does 4133 12-11-11-28 bit can't do wazza over 3866

I can beat that. My set that does 2066 12-11-11 2.00V can't even do CW at 1866 12-12-12.

[websmile]

What´s waza?

[Alex@ro]

I can beat that. My set that does 2066 12-11-11 2.00V can't even do CW at 1866 12-12-12.

 

4133 12-11-11 would be under 5 53 lol

[coolhand411]

I can beat that. My set that does 2066 12-11-11 2.00V can't even do CW at 1866 12-12-12.

 

someone I know have a kit 4300c12 capable but can't waza @3866

 

P.S. Michael..I'm gonna steal your avatar ,jk

[GtiJason]

Oh B die you son of a gun. I was playing around last night with a kit that's 4133c12 50/51/5/5 waza stable and couldn't even get XTU to run at any relaxed rtl settings that are more . Tried 51/51/5/4 ... 51/52/3/3 ... 51/52/4/4 ... 50/51/6/6 nothing. Win 10 32 bit, but unable to access msconfig