December 11, 20186 yr https://www.win-raid.com/t3835f16-GUIDE-Fixing-HT-for-Coffee-Lake-CPUs-on-Skylake-and-Kaby-Lake-motherboards-Z-Z.html edit: should have refreshed site. Edited December 11, 20186 yr by @rne
December 16, 20186 yr I can overclock now. Thanks again guys! On a side note, anyone know why I get post code 55 hang ups during reboots?
December 16, 20186 yr Usually, 55 is from RAM, so check the latencies, if you set them manually. Or increase RAM voltage a bit. Also you can try increasing the VCCIO and/or VCCSA voltage.
December 22, 20186 yr 7 hours ago, AutisticChris said: @dreamcat4 @elmor Any chance of this bios making it to the M9A? Well I never posted any BIOS made by elmor. But heres the latest one from Dsanke. See attachment. Dec 19 2018 [12:47 PM] dsanke: Author: @dsanke Motherboard: ASUS ROG MAXIMUS IX APEX Based on: ASUS ROG MAXIMUS X APEX 1801 ME: 11.7.0.1229 Microcodes: 506E0(0x18),506E1(0x2A),506E2(0x2E),506E3(0x74),506E8(0x34),906E9(0x5E),906EA(0x6A),906EB(0x5E),906EC(0x84). Note: Flash via SPI Programmer. Support All LGA1151 CPU except Xeon and Skylake ES. AURA/SLI Fixed. $ md5sum ROG-MAXIMUS-IX-APEX-ASUS-1801.7z ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin 0c6637e1ea85f94f72dadd57c5c141b5 ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 968d92d84f2869f69ca759c2452937b4 ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin ROG-MAXIMUS-IX-APEX-ASUS-1801.7z
December 23, 20186 yr 15 minutes ago, sabishiihito said: What are the advantages of the new UEFI? Just literally whatever was changed in the 10 apex. So for that, you need to consult the official apex 10 (z370) '1801' changelog / release notes. Which is being provided by ASUS, (not us).
December 27, 20186 yr On 7/12/2018 at 4:42 PM, jjxaker said: https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-885435015.2.66ec4f4fFaaTcn&id=566900623882 Could you tell me what the difference in this two methods? Also there is third method (with 2 pads isolating and 2 pads short) and now which one most techniclly correct? As anyone sayed there is method allow avoid modding CPU by shorting two pins near KBC but i dont understand how KBC lines may take affect on CPU socket.
January 10, 20196 yr sky lake and kaby lake continue to operate with the coffe lake hardware modification in the firts post or is it necessary to switch off? It is not clear to me if the hardware change on the ix apex replaces only the two pins to short-circuit the cpu and therefore always serves the isolation of the pins under the cpu
January 11, 20196 yr 23 hours ago, antome said: sky lake and kaby lake continue to operate with the coffe lake hardware modification in the firts post or is it necessary to switch off? It is not clear to me if the hardware change on the ix apex replaces only the two pins to short-circuit the cpu and therefore always serves the isolation of the pins under the cpu I answer myself, 7600k leaves and works properly with hardware modification for coffe lake. Is the isolation of the pin for coffe lake necessary?
January 11, 20196 yr Just now, antome said: I answer myself, 7600k leaves and works properly with hardware modification for coffe lake. Is the isolation of the pin for coffe lake necessary? Only mod for MB is needed. you can use coffee lake cpu as is.
January 21, 20196 yr Hello guys, Anyone tested M ix Apex with 9900K and latest @dsanke 1801 mod bios? To be clear, the steps from first post are still needed to flash modded bios to stock (yet) mobo? Edited January 21, 20196 yr by k2viper
January 22, 20196 yr 21 hours ago, k2viper said: Hello guys, Anyone tested M ix Apex with 9900K and latest @dsanke 1801 mod bios? To be clear, the steps from first post are still needed to flash modded bios to stock (yet) mobo? It works and better with A2 mems than 1704.
January 23, 20196 yr I can't get my SPI flasher to even detect either BIOS chip on my M9A. Using a TL866CS and clip.
January 27, 20196 yr On 12/22/2018 at 12:42 PM, dreamcat4 said: Well I never posted any BIOS made by elmor. But heres the latest one from Dsanke. See attachment. Dec 19 2018 [12:47 PM] dsanke: Author: @dsanke Motherboard: ASUS ROG MAXIMUS IX APEX Based on: ASUS ROG MAXIMUS X APEX 1801 ME: 11.7.0.1229 Microcodes: 506E0(0x18),506E1(0x2A),506E2(0x2E),506E3(0x74),506E8(0x34),906E9(0x5E),906EA(0x6A),906EB(0x5E),906EC(0x84). Note: Flash via SPI Programmer. Support All LGA1151 CPU except Xeon and Skylake ES. AURA/SLI Fixed. $ md5sum ROG-MAXIMUS-IX-APEX-ASUS-1801.7z ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin 0c6637e1ea85f94f72dadd57c5c141b5 ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 968d92d84f2869f69ca759c2452937b4 ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin ROG-MAXIMUS-IX-APEX-ASUS-1801.7z can i ask you how you adapt the bios for the apex ix? i am tryng to make the same but on an other z270 asus board (i am tryng to adapt the maximus x code bios to the maximus ix code). i allready have a modded ix code bios for support coffee lake that can be flashed with flashback but now i wanted the complete maximus x code z370 bios on mine but so that kabylake cpus can still boot
February 5, 20196 yr 8350K on IX apex: Ok with BIOS 1804, but with 0094 boot stops at 03 or 18 What could be the issue? Microcode? Edited February 5, 20196 yr by superpatodonaldo
February 5, 20196 yr Iirc, microcode for 8350K is not implemented in bios 0094. you need to add that one using mmtool first.
February 14, 20196 yr @Alex@ro 9900K on IX Apex ln2 cooling: need ln2 mode? RVSD switch on? DMI PLL etc. same as kabylake?
March 1, 20196 yr Modded the Apex IX and I am running Bios 0094. Testing with a Celeron G4920. Getting stuck at postcode 18. Reading in this thread it seems the microcode isn't implemented in the bios.@@rne You suggest to use mmtool. I never used that. Is that easy to do ? Do you have any tips ? Edit: Which cpu's are in the 0094 bios ? Edited March 1, 20196 yr by 5erveD
March 5, 20196 yr On 12/22/2018 at 6:42 AM, dreamcat4 said: Well I never posted any BIOS made by elmor. But heres the latest one from Dsanke. See attachment. Dec 19 2018 [12:47 PM] dsanke: Author: @dsanke Motherboard: ASUS ROG MAXIMUS IX APEX Based on: ASUS ROG MAXIMUS X APEX 1801 ME: 11.7.0.1229 Microcodes: 506E0(0x18),506E1(0x2A),506E2(0x2E),506E3(0x74),506E8(0x34),906E9(0x5E),906EA(0x6A),906EB(0x5E),906EC(0x84). Note: Flash via SPI Programmer. Support All LGA1151 CPU except Xeon and Skylake ES. AURA/SLI Fixed. $ md5sum ROG-MAXIMUS-IX-APEX-ASUS-1801.7z ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin 0c6637e1ea85f94f72dadd57c5c141b5 ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 968d92d84f2869f69ca759c2452937b4 ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin ROG-MAXIMUS-IX-APEX-ASUS-1801.7z Can this bios be installed via the FLASHBACK? I got my 9900k running WITHOUT HT with the bios posted on the first page 0092 Thank you in advance
March 5, 20196 yr On 7/10/2018 at 5:58 PM, jjxaker said: Bios UPDATE Base: Asus Maximus X Apex for Maximus IX Apex@BIOS MOD 1602 Support CPU: Skylake/Kaby Lake/Coffee Lake Latest Bios Microcode: Intel CPU SKL 0xC6, KBL 0x8E, CFL 8 Core 0x96 / 6 Core 0x96 / 4 Core 0x8E. Intel EFI RST 16.5.0.3492 Intel VBIOS 1059/GOP 9.0.1080 Intel Lan UNDI 0.0.19/Lan OROM 0.1.13/Lan GBE 0.5 Intel ME Firmware 11.7.0.1129 All Region DESC/ME/BIOS Unlock. All components of the board are working. including RGB Light, on-board graphics card, HT, PCI-e. To MOD flash through the ISP programmer or HW MOD USB Bios Flashback. M10A_MOD_ver1602.rar your bios worked! gotta see how to get the network card working. not sure what i did. thanks everyone
March 5, 20196 yr actually.... lol. Running into an issue. If I try OC'ing the 9900k, and it locks up due to a bad OC. I get stuck after the bios load. 'Hit f1 to load setup' Only thing that has fixed it, is to reflash the BIOS with the flash back. Anyone experiencing this?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.