@rne Posted December 11, 2018 Posted December 11, 2018 (edited) https://www.win-raid.com/t3835f16-GUIDE-Fixing-HT-for-Coffee-Lake-CPUs-on-Skylake-and-Kaby-Lake-motherboards-Z-Z.html edit: should have refreshed site. Edited December 11, 2018 by @rne 1 1 Quote
MTP04 Posted December 16, 2018 Posted December 16, 2018 I can overclock now. Thanks again guys! On a side note, anyone know why I get post code 55 hang ups during reboots? 1 Quote
Bruno Posted December 16, 2018 Posted December 16, 2018 Usually, 55 is from RAM, so check the latencies, if you set them manually. Or increase RAM voltage a bit. Also you can try increasing the VCCIO and/or VCCSA voltage. 3 Quote
Guest Posted December 22, 2018 Posted December 22, 2018 @dreamcat4 @elmor Any chance of this bios making it to the M9A? Quote
dreamcat4 Posted December 22, 2018 Posted December 22, 2018 7 hours ago, AutisticChris said: @dreamcat4 @elmor Any chance of this bios making it to the M9A? Well I never posted any BIOS made by elmor. But heres the latest one from Dsanke. See attachment. Dec 19 2018 [12:47 PM] dsanke: Author: @dsanke Motherboard: ASUS ROG MAXIMUS IX APEX Based on: ASUS ROG MAXIMUS X APEX 1801 ME: 11.7.0.1229 Microcodes: 506E0(0x18),506E1(0x2A),506E2(0x2E),506E3(0x74),506E8(0x34),906E9(0x5E),906EA(0x6A),906EB(0x5E),906EC(0x84). Note: Flash via SPI Programmer. Support All LGA1151 CPU except Xeon and Skylake ES. AURA/SLI Fixed. $ md5sum ROG-MAXIMUS-IX-APEX-ASUS-1801.7z ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin 0c6637e1ea85f94f72dadd57c5c141b5 ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 968d92d84f2869f69ca759c2452937b4 ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 2 3 Quote
sabishiihito Posted December 23, 2018 Posted December 23, 2018 What are the advantages of the new UEFI? 1 Quote
dreamcat4 Posted December 23, 2018 Posted December 23, 2018 15 minutes ago, sabishiihito said: What are the advantages of the new UEFI? Just literally whatever was changed in the 10 apex. So for that, you need to consult the official apex 10 (z370) '1801' changelog / release notes. Which is being provided by ASUS, (not us). 1 Quote
De_BOSCH Posted December 27, 2018 Posted December 27, 2018 On 7/12/2018 at 4:42 PM, jjxaker said: https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-885435015.2.66ec4f4fFaaTcn&id=566900623882 Could you tell me what the difference in this two methods? Also there is third method (with 2 pads isolating and 2 pads short) and now which one most techniclly correct? As anyone sayed there is method allow avoid modding CPU by shorting two pins near KBC but i dont understand how KBC lines may take affect on CPU socket. 2 Quote
antome Posted January 10, 2019 Posted January 10, 2019 sky lake and kaby lake continue to operate with the coffe lake hardware modification in the firts post or is it necessary to switch off? It is not clear to me if the hardware change on the ix apex replaces only the two pins to short-circuit the cpu and therefore always serves the isolation of the pins under the cpu Quote
antome Posted January 11, 2019 Posted January 11, 2019 23 hours ago, antome said: sky lake and kaby lake continue to operate with the coffe lake hardware modification in the firts post or is it necessary to switch off? It is not clear to me if the hardware change on the ix apex replaces only the two pins to short-circuit the cpu and therefore always serves the isolation of the pins under the cpu I answer myself, 7600k leaves and works properly with hardware modification for coffe lake. Is the isolation of the pin for coffe lake necessary? Quote
Vital-uK Posted January 11, 2019 Posted January 11, 2019 Just now, antome said: I answer myself, 7600k leaves and works properly with hardware modification for coffe lake. Is the isolation of the pin for coffe lake necessary? Only mod for MB is needed. you can use coffee lake cpu as is. Quote
k2viper Posted January 21, 2019 Posted January 21, 2019 (edited) Hello guys, Anyone tested M ix Apex with 9900K and latest @dsanke 1801 mod bios? To be clear, the steps from first post are still needed to flash modded bios to stock (yet) mobo? Edited January 21, 2019 by k2viper 1 Quote
Mikecdm Posted January 22, 2019 Posted January 22, 2019 21 hours ago, k2viper said: Hello guys, Anyone tested M ix Apex with 9900K and latest @dsanke 1801 mod bios? To be clear, the steps from first post are still needed to flash modded bios to stock (yet) mobo? It works and better with A2 mems than 1704. Quote
sabishiihito Posted January 23, 2019 Posted January 23, 2019 I can't get my SPI flasher to even detect either BIOS chip on my M9A. Using a TL866CS and clip. 1 Quote
geiti94 Posted January 27, 2019 Posted January 27, 2019 On 12/22/2018 at 12:42 PM, dreamcat4 said: Well I never posted any BIOS made by elmor. But heres the latest one from Dsanke. See attachment. Dec 19 2018 [12:47 PM] dsanke: Author: @dsanke Motherboard: ASUS ROG MAXIMUS IX APEX Based on: ASUS ROG MAXIMUS X APEX 1801 ME: 11.7.0.1229 Microcodes: 506E0(0x18),506E1(0x2A),506E2(0x2E),506E3(0x74),506E8(0x34),906E9(0x5E),906EA(0x6A),906EB(0x5E),906EC(0x84). Note: Flash via SPI Programmer. Support All LGA1151 CPU except Xeon and Skylake ES. AURA/SLI Fixed. $ md5sum ROG-MAXIMUS-IX-APEX-ASUS-1801.7z ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin 0c6637e1ea85f94f72dadd57c5c141b5 ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 968d92d84f2869f69ca759c2452937b4 ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin ROG-MAXIMUS-IX-APEX-ASUS-1801.7z can i ask you how you adapt the bios for the apex ix? i am tryng to make the same but on an other z270 asus board (i am tryng to adapt the maximus x code bios to the maximus ix code). i allready have a modded ix code bios for support coffee lake that can be flashed with flashback but now i wanted the complete maximus x code z370 bios on mine but so that kabylake cpus can still boot 2 Quote
superpatodonaldo Posted February 5, 2019 Posted February 5, 2019 (edited) 8350K on IX apex: Ok with BIOS 1804, but with 0094 boot stops at 03 or 18 What could be the issue? Microcode? Edited February 5, 2019 by superpatodonaldo 1 Quote
@rne Posted February 5, 2019 Posted February 5, 2019 Iirc, microcode for 8350K is not implemented in bios 0094. you need to add that one using mmtool first. 1 Quote
superpatodonaldo Posted February 14, 2019 Posted February 14, 2019 @Alex@ro 9900K on IX Apex ln2 cooling: need ln2 mode? RVSD switch on? DMI PLL etc. same as kabylake? Quote
Alex@ro Posted February 15, 2019 Author Posted February 15, 2019 yes, same voltages and rsvd switch work similar to apex x or xi 1 Quote
5erveD Posted March 1, 2019 Posted March 1, 2019 (edited) Modded the Apex IX and I am running Bios 0094. Testing with a Celeron G4920. Getting stuck at postcode 18. Reading in this thread it seems the microcode isn't implemented in the bios.@@rne You suggest to use mmtool. I never used that. Is that easy to do ? Do you have any tips ? Edit: Which cpu's are in the 0094 bios ? Edited March 1, 2019 by 5erveD Quote
NorySS Posted March 5, 2019 Posted March 5, 2019 On 12/22/2018 at 6:42 AM, dreamcat4 said: Well I never posted any BIOS made by elmor. But heres the latest one from Dsanke. See attachment. Dec 19 2018 [12:47 PM] dsanke: Author: @dsanke Motherboard: ASUS ROG MAXIMUS IX APEX Based on: ASUS ROG MAXIMUS X APEX 1801 ME: 11.7.0.1229 Microcodes: 506E0(0x18),506E1(0x2A),506E2(0x2E),506E3(0x74),506E8(0x34),906E9(0x5E),906EA(0x6A),906EB(0x5E),906EC(0x84). Note: Flash via SPI Programmer. Support All LGA1151 CPU except Xeon and Skylake ES. AURA/SLI Fixed. $ md5sum ROG-MAXIMUS-IX-APEX-ASUS-1801.7z ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin 0c6637e1ea85f94f72dadd57c5c141b5 ROG-MAXIMUS-IX-APEX-ASUS-1801.7z 968d92d84f2869f69ca759c2452937b4 ROG-MAXIMUS-IX-APEX-ASUS-1801/ROG-MAXIMUS-IX-APEX-ASUS-1801.bin ROG-MAXIMUS-IX-APEX-ASUS-1801.7z Can this bios be installed via the FLASHBACK? I got my 9900k running WITHOUT HT with the bios posted on the first page 0092 Thank you in advance Quote
NorySS Posted March 5, 2019 Posted March 5, 2019 On 7/10/2018 at 5:58 PM, jjxaker said: Bios UPDATE Base: Asus Maximus X Apex for Maximus IX Apex@BIOS MOD 1602 Support CPU: Skylake/Kaby Lake/Coffee Lake Latest Bios Microcode: Intel CPU SKL 0xC6, KBL 0x8E, CFL 8 Core 0x96 / 6 Core 0x96 / 4 Core 0x8E. Intel EFI RST 16.5.0.3492 Intel VBIOS 1059/GOP 9.0.1080 Intel Lan UNDI 0.0.19/Lan OROM 0.1.13/Lan GBE 0.5 Intel ME Firmware 11.7.0.1129 All Region DESC/ME/BIOS Unlock. All components of the board are working. including RGB Light, on-board graphics card, HT, PCI-e. To MOD flash through the ISP programmer or HW MOD USB Bios Flashback. M10A_MOD_ver1602.rar your bios worked! gotta see how to get the network card working. not sure what i did. thanks everyone Quote
NorySS Posted March 5, 2019 Posted March 5, 2019 actually.... lol. Running into an issue. If I try OC'ing the 9900k, and it locks up due to a bad OC. I get stuck after the bios load. 'Hit f1 to load setup' Only thing that has fixed it, is to reflash the BIOS with the flash back. Anyone experiencing this? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.