ale belo Posted November 11, 2018 Posted November 11, 2018 Trans sistor ftw! Amazing score dude! Quote
ObscureParadox Posted November 11, 2018 Posted November 11, 2018 urgh..... Time to boot up the Rex again... 1 Quote
M1RROR Posted November 12, 2018 Posted November 12, 2018 Good score! but, where is verification link? Quote
cnzdrn Posted November 12, 2018 Posted November 12, 2018 4 hours ago, M1RROR said: Good score! but, where is verification link? http://browser.geekbench.com/geekbench3/8703364 Quote
I.nfraR.ed Posted November 12, 2018 Posted November 12, 2018 (edited) Nice one! In theory sempron + ddr3 would be untouchable for a Xeon. Hopefully I will try mine soon, already have it running up to 450+ HTT with DDR3 board, just need LN2 It also scores much higher in other benchmarks Edited November 12, 2018 by I.nfraR.ed Quote
unityofsaints Posted November 12, 2018 Posted November 12, 2018 AMD back on top where they belong! Quote
Alpi Posted November 12, 2018 Posted November 12, 2018 Wow ! Awesome result ! Nice work, grats ! Quote
cnzdrn Posted November 12, 2018 Posted November 12, 2018 4 hours ago, I.nfraR.ed said: Nice one! In theory sempron + ddr3 would be untouchable for a Xeon. Hopefully I will try mine soon, already have it running up to 450+ HTT with DDR3 board, just need LN2 It also scores much higher in other benchmarks You are right! With 6.3 ghz (450 htt your chip) i think you will get 3550-3625. You have very strong ram (gtx2 @ 6-6-6 based on your validation with m4a89gtd) I tried cinebench r15, with 421x14,5 i made 152. Only one run with realtime, maybe can do better at same frequency. Thanks to all! 1 Quote
suzuki Posted November 12, 2018 Posted November 12, 2018 This will make L3014 very cheap in the future. No way the xeon can catch a ddr3 run. Quote
unityofsaints Posted November 12, 2018 Posted November 12, 2018 2 hours ago, suzuki said: This will make L3014 very cheap in the future. No way the xeon can catch a ddr3 run. There is still GPUpi, CB, etc. Quote
yosarianilives Posted November 13, 2018 Posted November 13, 2018 (edited) 15 hours ago, unityofsaints said: There is still GPUpi, CB, etc. r15 definitely gains from mem on these chips, just a small gain. Got to remember that at 6.7 on ddr2 it's just a few points behind l3014 on ddr3, and at 6.1 on ddr3 the 150 is about 10 points away from l3014. Definitely worth binning 890fx boards to find one that can support 6.5+ on a sempron. Edited November 13, 2018 by yosarianilives Quote
bolc Posted November 13, 2018 Posted November 13, 2018 18 hours ago, suzuki said: This will make L3014 very cheap in the future. No way the xeon can catch a ddr3 run. that d be great any sample taking dust on your cabinet to sell? Quote
ObscureParadox Posted November 13, 2018 Posted November 13, 2018 18 hours ago, suzuki said: This will make L3014 very cheap in the future. No way the xeon can catch a ddr3 run. You can still get around 3500 with an L3014 if you maximise everything. This for sure isn't game over for the Xeon It's also almost impossible to get much faster than this with a Sempron on DDR3 because of the IMC limitations. All the same I'm really glad someone managed to get this fast with a Sempron, it for sure makes the game really intersting. I'm looking forward to the battle Quote
suzuki Posted November 13, 2018 Posted November 13, 2018 1 hour ago, bolc said: that d be great any sample taking dust on your cabinet to sell? I am afraid to mod the cpu or motherboard :)). will sacrifice a Ud3R which i have and works with ddr2,at least to have an ideea about what my cpu’s can do ,this are the only ones on skt 775 which are not tested. Quote
bolc Posted November 13, 2018 Posted November 13, 2018 removing socket notches is easy, but making holes in the cpu pcb is fine too, but is a bit more risky for the cpu if you never did this before. the cpu is more rare than the board so you might want to do the board instead but but for a 3014, a REX is likely better, series 3000 are compatible with x38/48, so if you plan to REX it later, you may make notches. as far as you need to go : Quote
yosarianilives Posted November 13, 2018 Posted November 13, 2018 Yeah I personally wouldn't have the balls to cut on a l3014 myself, cutting the plastic part of the socket is much lower risk and not nearly as scary as some other things I've done (mostly cutting the back off of an pcie x4 slot to run an x16 card.) Quote
suzuki Posted November 13, 2018 Posted November 13, 2018 @bolc -when it comes to such things, I have 2 left legs instead of hands,why risk it when I already know my potential ? :)). Will go to a local service and point out what they have to do, same with the mocf mod for coffee lake cpu's, Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.