Hiwa Posted May 5, 2012 Share Posted May 5, 2012 Hey hiwa , i have the same batch L206B302 (Digitec) First boot with lose PSC Mem setting 2800 Yes same here max mem 1650 here, 63xx pi I go to change it today. Quote Link to comment Share on other sites More sharing options...
M.Beier Posted May 5, 2012 Share Posted May 5, 2012 L206B302 didn't test max frq but only IMC 1600 BOOT 1800 CODE 23 haha incredible but real. PS: to who says CPU rated to 2133 tried 1600 1800 1866 2000 2133 2400 2666 2600 i RMA it tmr. Still headbanging to dat music! Quote Link to comment Share on other sites More sharing options...
Hiwa Posted May 5, 2012 Share Posted May 5, 2012 Still headbanging to dat music! No idea what's it, I was watching the new Panasonic tv at same time. Quote Link to comment Share on other sites More sharing options...
Vaykir Posted May 5, 2012 Share Posted May 5, 2012 3770K @ 6610MHz: http://valid.canardpc.com/show_oc.php?id=2357813 3213B440 #2938 Costa Rica LN2 cooled of course No CB & no CBB. Quote Link to comment Share on other sites More sharing options...
moowarcow Posted May 5, 2012 Share Posted May 5, 2012 L204b259 hey DOM., what kind of cpu cooler are you using? also, what are you using for 24/7 use? thanks, steve Quote Link to comment Share on other sites More sharing options...
Vaykir Posted May 7, 2012 Share Posted May 7, 2012 3770K @ 6600 MHz L212B252 # 0154 No CB, No CBB. wPrime1024 with 6150MHz. ============================ 3770K @ 6100MHz 3213B440 #0399 CB @ -180°C, CBB @ -140°C No benchmarks with that crap tested -.- Quote Link to comment Share on other sites More sharing options...
Brandybuck Posted May 7, 2012 Share Posted May 7, 2012 L205B355 6.7ghz directly boot from bios 1 core Quote Link to comment Share on other sites More sharing options...
NoGuru Posted May 7, 2012 Share Posted May 7, 2012 Same batch as the chip that died on me, L204B322 DICE http://valid.canardpc.com/show_oc.php?id=2359651 Quote Link to comment Share on other sites More sharing options...
NoGuru Posted May 7, 2012 Share Posted May 7, 2012 Same batch as the chip that died on me, L204B322 DICE http://valid.canardpc.com/show_oc.php?id=2359651 Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted May 8, 2012 Share Posted May 8, 2012 give us highest bench results too, not just valids! Quote Link to comment Share on other sites More sharing options...
NoGuru Posted May 8, 2012 Share Posted May 8, 2012 give us highest bench results too, not just valids! I haven't benched it yet, just did a quick DICE run for a Validation. Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted May 17, 2012 Share Posted May 17, 2012 L143B687 - 0836 (pic) 5000 at 1.27/1.29V air (32M, one/two cores) 6800+ LN2 Quote Link to comment Share on other sites More sharing options...
K404 Posted May 19, 2012 Share Posted May 19, 2012 (edited) L212B244 Malay. 5GHz 2C/2T @ 1.45v (Spi 32M) and L212B244 Malay. 5GHz 2C/2T @ 1.42v(Spi 32M) ........5.8GHz 3DMark -100, 1.75v Edited May 22, 2012 by K404 Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted May 19, 2012 Share Posted May 19, 2012 L212B244 Malay. 5GHz 2C/2T @ 1.45v and L212B244 Malay. 5GHz 2C/2T @ 1.42v Did you test them with LN2? Quote Link to comment Share on other sites More sharing options...
K404 Posted May 19, 2012 Share Posted May 19, 2012 I'll test the 1.42v chip in the next couple days, but i'm not expecting anything great. I'm not really interested in anything under 6.5GHz, so I guess I need to be aiming at ~1.32v for 5GHz Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted May 19, 2012 Share Posted May 19, 2012 (edited) Not sure if I posted earlier in this thread... Thought I did. Anyways, just figured out my MVG is coldbugged. Tested 3 chips in it so far. One chip was pretested to have no coldbug in another MVG, but coldbugged in mine around -110. The second chip coldbugged in this board at the same points, but ran full pot in another MVG immediately after that. Third chip also coldbugged in my board, and I resold it without testing in any other board. Edited May 19, 2012 by I.M.O.G. Quote Link to comment Share on other sites More sharing options...
Splave Posted May 19, 2012 Share Posted May 19, 2012 using the jumper on the board? Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted May 19, 2012 Share Posted May 19, 2012 (edited) using the jumper on the board? Yes. Followed all best practices in shaminos m5guide.docx and sins guide, regarding avoiding coldbugs. Ran same settings on both boards... One coldbugged with all three chips, two of those chips were tested in the other mvg and had no coldbugs. The first 3770k I sold for $20 less than I paid for it, because I thought it was a dud... It was probably fine too, just the board. I'd like to take the bugged board out back and put it down, but will probably just sell it to someone who doesn't go cold and buy another/something else. My results were really consistent with temps on all 3 chips coldbugging at the same point within 5C. Edited May 19, 2012 by I.M.O.G. Quote Link to comment Share on other sites More sharing options...
Splave Posted May 22, 2012 Share Posted May 22, 2012 (edited) new one for me 3215b482 EDIT: 5ghz 1.38v ln2 in a bit Edited May 22, 2012 by Splave Quote Link to comment Share on other sites More sharing options...
K404 Posted May 22, 2012 Share Posted May 22, 2012 Updated my post with utterly irrelevant, useless, depressing LN2 numbers Quote Link to comment Share on other sites More sharing options...
Splave Posted May 22, 2012 Share Posted May 22, 2012 new one for me 3215b482 EDIT: 5ghz 1.38v ln2 in a bit Sucked 6.25ghz CPUs max...5950mhz max windows boot Quote Link to comment Share on other sites More sharing options...
sember Posted May 22, 2012 Share Posted May 22, 2012 Sucked 6.25ghz CPUs max...5950mhz max windows boot Thats kinda sucky one indeed, but that 5GHz under 1.4volts just make me thinking that maybe this air binning isnt so accurate afterall for ALL chips. Maybe some chips scales more with temps than voltage and others just opposite of that.. I have some kind of wall on my cpu, it can do 4.7GHz 1.28v, 4.8GHz 1.31v, 4.9GHz 1,35v, 5GHz 1.55v... Il try tomorrow cool it down with single stage and see how those steps go with it. If someone else have tested their chips it would be nice to know how they do Quote Link to comment Share on other sites More sharing options...
Splave Posted May 23, 2012 Share Posted May 23, 2012 ^indeed I have one that needs 1.48v for 5ghz on air and only needs 1.7v for 6.15 spi1m max is only 6460 though....so mediocre Quote Link to comment Share on other sites More sharing options...
M.Beier Posted May 23, 2012 Share Posted May 23, 2012 L211B472 5000mhz 32M 1.45v 4c/8t L211B472 4900mhz 1.44v fully stable for all benchies L211B472 4500mhz 1.175v L211B472 4000mhz 1.04v All done on watercooling. IMC: 1200mhz with 2 DIMM IMC: 1066mhz with 4 DIMM Tested on Extreme6. Quote Link to comment Share on other sites More sharing options...
K404 Posted May 23, 2012 Share Posted May 23, 2012 I suspect the rule is true, but has to be approached from 2 directions. I *expect* that all 6.5GHz+ chips do 5GHz at 1.275-1.30v? But not all chips that do 5GHz at 1.275-1.30v? will do 6.5GHz+ SoF.... your 5.8GHz Vs 6.5GHz comment.... what settings for that 5.8GHz? HWB community needs a more rigid binning "procedure" if we are going to learn anything. People are using different voltages, different benchmarks, "cascade" means -80 to -105 and these chips are temperature sensitive, we all know that. # Cores enabled? The framework for this is developing on HWB, but with a few more ....."rules"..... and better maintained threads, HWB can become the global go-to site for CPU batch performance info, when picking the right batch matters Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.