Andrix85 Posted July 28, 2012 Posted July 28, 2012 Hi Boys..I have a 2600K that can do 5700MHZ with 1.65V with SS. What possibility Can I Have with 3770K with SS ? Quote
Crew Vivi Posted July 31, 2012 Crew Posted July 31, 2012 55 error at 2900mhz? rma bro that board sounds like a dud Quote
Hiwa Posted August 1, 2012 Posted August 1, 2012 Shabby on 5 GHZ - not sure how many good IMCs I missed until now -.- How many good 3D chips i lost until now? Quote
Massman Posted August 1, 2012 Author Posted August 1, 2012 sorted out "55" - 2900 seems to be total limit of the ram..tested single channel and boots 2920 but "55" or "4F" (instable boot, almost doing it) a bit past that... New board and bill tomorrow...I still wonder about influence in 3D with IB + MEM madness... How many MHZ can you compensate with nice mem? btw pure clockspeed will not gain you any ms - 1470+ hynix loose timings fails agains 1250 PSC tight... If the CPU doesn't lock at '23' I'd consider it a "pass" in terms of IMC binning. Of the 20 chips I tested, whenever it couldn't pass a certain frequency because of the IMC, it would show '23'. When it could pass, but memory wasn't good enough, it would show '55'. On air cooling, IMHO Samsung IC is stronger if you can run 1330+ C9-12-12 with tight subs. BBSE/PSC at 1250C8-12-8 with tight subs should not beat Samung IC ... but of course under cold they will. Quote
TaPaKaH Posted August 1, 2012 Posted August 1, 2012 On air cooling, IMHO Samsung IC is stronger if you can run 1330+ C9-12-12 with tight subs. BBSE/PSC at 1250C8-12-8 with tight subs should not beat Samung IC ... but of course under cold they will.Samsung just isn't better. Running 1333 9-12-12+ requires a very good (therefore expensive) kit and a very good IMC. Same money+IMC applied to PSC/BBSE will easily get you 1250 8-11-8 / 8-10-7 and beat Samsung. Once CPU goes cold high mem clocks become even more difficult to run and game is over for 4Gb stuff.The main reason why people use Samsung over PSC/BBSE is that they can buy it brand new or get a free presskit. Quote
[DRACO] Posted August 1, 2012 Posted August 1, 2012 (edited) Bacht: 3218B975 6860mhz max cpu LN2 / Testing SS 6000mhz 1,68vt -52 Today I tested with SS, and I have post code 62 ... dead? MSI GD-80 Z77 this kills easily? Edited August 1, 2012 by [DRACO] Quote
M.Beier Posted August 2, 2012 Posted August 2, 2012 (edited) If the CPU doesn't lock at '23' I'd consider it a "pass" in terms of IMC binning. Of the 20 chips I tested, whenever it couldn't pass a certain frequency because of the IMC, it would show '23'. When it could pass, but memory wasn't good enough, it would show '55'. On air cooling, IMHO Samsung IC is stronger if you can run 1330+ C9-12-12 with tight subs. BBSE/PSC at 1250C8-12-8 with tight subs should not beat Samung IC ... but of course under cold they will. Hold your horses Massy 8-12-8 is 1300-1350mhz land, air... 7/8-10/11-7/8 is 1250mhz land Atleast for PSC that is. However Samsung is extreme value for money.. Edited August 2, 2012 by M.Beier Quote
[DRACO] Posted August 2, 2012 Posted August 2, 2012 Bacht 3218b975 5000mhz 1,23vt 4c 4t SS 5100mhz 1,31vt 4c 8t SS Good cpu? Testing 5000mhz 1,1vt 32m pass Quote
Crew Leeghoofd Posted August 2, 2012 Crew Posted August 2, 2012 Comparing SS with air is hard not ? Your 4C/8T prolly needs a tad more Vcore to pass 32M. Estimating 1.35Vcore for the 4/4 5Ghz run is quite okay. You will need to test her under LN2 to see how she cales... Quote
Crew Vivi Posted August 2, 2012 Crew Posted August 2, 2012 Hold your horses Massy 8-12-8 is 1300-1350mhz land, air... 7/8-10/11-7/8 is 1250mhz land Atleast for great PSC that is. However Samsung is extreme value for money.. fixed your post beier Quote
Crew Leeghoofd Posted August 2, 2012 Crew Posted August 2, 2012 Marc only has got great rams Goddie, you should know that Quote
M.Beier Posted August 2, 2012 Posted August 2, 2012 Marc only has got great rams Goddie, you should know that Nah just a matter of being abusive.... 1.825 -> 1.93v seems to be sweetspot for PSC, aircooled on yvi biatch Quote
M.Beier Posted August 3, 2012 Posted August 3, 2012 1.93v on air? That poor PSC. <3 Gigabyte shitty UEFI BIOS.... Same moment the topdog of BIOS team changed jobrole, it went down hill, and its hit rock bottom now. Quote
sin0822 Posted August 4, 2012 Posted August 4, 2012 i am sorry but that isn't correct about the job role and such, they have been changed back since CES and why the Z77 UEFi is better than P67, Z68, and X79. The board just doesn't like you. FYi that topdog of BIOS team is now head of R&D. It went down hill since P67 launch but is on its way up since Z77, it has more way to go, but I have faith it will get better than it was with X58. Quote
jjjc Posted August 4, 2012 Posted August 4, 2012 (edited) i am sorry but that isn't correct about the job role and such, they have been changed back since CES and why the Z77 UEFi is better than P67, Z68, and X79. The board just doesn't like you. FYi that topdog of BIOS team is now head of R&D. It went down hill since P67 launch but is on its way up since Z77, it has more way to go, but I have faith it will get better than it was with X58. +1... UP boards especially are looking very good. Finally got hold of some Costa Rica chips today, they're not so easy to find here. 2 x 3218B460 with some quick air testing, LN2 coming early next week. First chip: My first air stable 5ghz Ivy. IMC looks good too, 8M 2800mhz almost pass with no voltage changes to IMC. 2nd CPU posted 5gig 1.36v won't boot into XP even with 1.4v. Edited August 4, 2012 by jjjc Quote
Ananerbe Posted August 4, 2012 Posted August 4, 2012 please anybody upload gigabyte Z77X-UD3H S3 BIOS !!! Quote
DOM. Posted August 4, 2012 Posted August 4, 2012 please anybody upload gigabyte Z77X-UD3H S3 BIOS !!! http://hwbot.org/forum/showthread.php?t=42040 Quote
Ananerbe Posted August 4, 2012 Posted August 4, 2012 http://hwbot.org/forum/showthread.php?t=42040 thanks Quote
M.Beier Posted August 4, 2012 Posted August 4, 2012 i am sorry but that isn't correct about the job role and such, they have been changed back since CES and why the Z77 UEFi is better than P67, Z68, and X79. The board just doesn't like you. FYi that topdog of BIOS team is now head of R&D. It went down hill since P67 launch but is on its way up since Z77, it has more way to go, but I have faith it will get better than it was with X58. Sin.... There is a bug, of which causes that one need high vdimm for ram, for no obvious reason,, its one of many bugs, and it was relevant in response to why the high vdimm.... The other 'isnt correct' part, maybe you should read what I wrote again.... But lets keep it to add value this thread. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.