Wizerty Posted October 9, 2014 Share Posted October 9, 2014 5.5Ghz Wprime @1.65v -120 is decent for a retail ? Quote Link to comment Share on other sites More sharing options...
nedernakker Posted October 10, 2014 Share Posted October 10, 2014 I binned on air at 4,5 GHz Core and 4,5 GHz Cache. With R5E Cinebench R15 1,25 vCore and lower: decent 1,20 vCore and lower: pretty good 1,15 vCore and lower: golden my 1.15V CB chip. only got to 5.4 GHz under LN2. this was on x99s Xpower board.. thinking it's the motherboard.. sincs all abve 1.5V would give BSoD's under load, even on low clocks Quote Link to comment Share on other sites More sharing options...
der8auer Posted October 10, 2014 Share Posted October 10, 2014 My chip does the same if it crashed before. The behavior on some Haswell-E CPUs is very strange. I have to cool down close to the CB, then clock up and bench. If it crashes I have to go back to +20°C. Otherwise I lose about 500 MHz. Quote Link to comment Share on other sites More sharing options...
xoqolatl Posted October 10, 2014 Share Posted October 10, 2014 I haven't noticed that effect on any motherboard. Only bug was that on boards other than RVE multi will sometimes get stuck on 35 and I have to warm up to coldboot temps to get ti back to turbo. Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted October 10, 2014 Share Posted October 10, 2014 5960X batch #: 3422B903 cb -118c but coldslow after 112c 5G XTU 5.2G XTU 5.2G R15 5.3 R15 Quote Link to comment Share on other sites More sharing options...
Wizerty Posted October 11, 2014 Share Posted October 11, 2014 (edited) Test on cold are really not max out I think, really hard to push those cpu 5960X*********************** 3413B921 ES Vid 0.928 wprime 4.5G @1.25v et CB @1.28v 5.5Ghz wprime 1.65w L429B862 boot 4.5 @1.36 wprime 1.34 L418c675 wprime/cinebench 11.5 4.5G @1.22v and 4.7@1.35 5.5Ghz wprime 1.65w 5930K*********************** 3415b238 A0051 Vid 1.07 1.3 @4.5g no boot Wprime @5G 1.32v 3415b238 A0412 Vid 1.04 1.3G 4.5G boot et Wprime ok 1.24 wprime ok Edited October 11, 2014 by Wizerty Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted October 11, 2014 Share Posted October 11, 2014 My chip does the same if it crashed before. The behavior on some Haswell-E CPUs is very strange. I have to cool down close to the CB, then clock up and bench. If it crashes I have to go back to +20°C. Otherwise I lose about 500 MHz.Experienced same behavior on 5960X today, benching 5700+MHz was easy within first 10min of session but after a couple of crashes could not even run 5500 no matter what. Is pulling the pot to +20 and back to near-CB sufficient or you have to remount the whole setup? Quote Link to comment Share on other sites More sharing options...
Gunslinger Posted October 11, 2014 Share Posted October 11, 2014 5.5 cpu-z or cinebench or 3d ? 5.5GHz Cinebench, next multi up BSOD at GT's in 3D (5.67GHz) Quote Link to comment Share on other sites More sharing options...
der8auer Posted October 11, 2014 Share Posted October 11, 2014 Experienced same behavior on 5960X today, benching 5700+MHz was easy within first 10min of session but after a couple of crashes could not even run 5500 no matter what. Is pulling the pot to +20 and back to near-CB sufficient or you have to remount the whole setup? No remount needed. Just heating up quickly to +20 and straight back to -130 and it works. Quote Link to comment Share on other sites More sharing options...
OClockDoc Posted October 16, 2014 Share Posted October 16, 2014 5960X Batch 3427B244 Quote Link to comment Share on other sites More sharing options...
dhenzjhen Posted October 16, 2014 Share Posted October 16, 2014 5960X Batch 3427B244 nice Quote Link to comment Share on other sites More sharing options...
ToyTen Posted October 17, 2014 Share Posted October 17, 2014 5960x SR20Q 3424B585 doesn't boot at 4.5Ghz, i went till 1,31vcore i wont try any further doesn't make sense to hot otherwise. 4,250 is "easy" at 1,235vcore. Can boot at 4375 cpu cache 1,32vcache though. I am using a goodwsatercooling Quote Link to comment Share on other sites More sharing options...
Rosty Posted October 18, 2014 Share Posted October 18, 2014 (edited) 5960X 3424B585 4.5 GHz at 1.27v, boot in win at 5 GHz with 1.55v cooling corsair H110 Edited October 18, 2014 by Rosty Quote Link to comment Share on other sites More sharing options...
ToyTen Posted October 18, 2014 Share Posted October 18, 2014 ^would you mind sharing some voltages that you put, with me ? Quote Link to comment Share on other sites More sharing options...
Rosty Posted October 18, 2014 Share Posted October 18, 2014 are you running default on mem ? Quote Link to comment Share on other sites More sharing options...
ToyTen Posted October 18, 2014 Share Posted October 18, 2014 lowered the mem to get rid of any bottleneck yes Quote Link to comment Share on other sites More sharing options...
Rosty Posted October 18, 2014 Share Posted October 18, 2014 i just got my memory today, first time running x99 setup, default was bad, i have to rise the mem ratio, on default i hit max cpu ratio at 42, same as you Quote Link to comment Share on other sites More sharing options...
littleboy Posted October 21, 2014 Share Posted October 21, 2014 my chip is batch code : 3419c190. 4.5Ghz 1.19 ~ 1.2v with air cooling. it can run the cinebench-mark. I didn't test it by ln2. Quote Link to comment Share on other sites More sharing options...
Dancop Posted October 21, 2014 Share Posted October 21, 2014 Lucky guy you are Quote Link to comment Share on other sites More sharing options...
dumo Posted October 26, 2014 Share Posted October 26, 2014 L429B850 Cold test next Quote Link to comment Share on other sites More sharing options...
sauria Posted October 26, 2014 Share Posted October 26, 2014 L429B850 Cold test next 4503 MHZ?? 8 core? Thanks. Quote Link to comment Share on other sites More sharing options...
Gunslinger Posted October 30, 2014 Share Posted October 30, 2014 5960X 3424B585 epic shit avoid at all cost Quote Link to comment Share on other sites More sharing options...
hornedfrog Posted October 30, 2014 Share Posted October 30, 2014 5960X 3424B585 epic bunnyextraction avoid at all cost How slow? Quote Link to comment Share on other sites More sharing options...
dhenzjhen Posted October 30, 2014 Share Posted October 30, 2014 How slow? I assume very very very slow Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted October 30, 2014 Crew Share Posted October 30, 2014 I assume very very very slow Even slower than Leeghoofd's CPU Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.