October 30, 20168 yr Administrators Clarification after I had this question now several times in private, the FM link has to show cpu used (unknown cpu not accepted) and 6003 is limit there as well. On the nvvdd, when it works for Galax R&D plus inhouse bencher there and was checked now several times, there is no way I can help with this.
October 30, 20168 yr Stable settings... Weird but true Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk
October 30, 20168 yr Sometimes you can get timer error also. Is this allowed? It should be impossible on skylake so it should be a bug in sysinfo...
October 30, 20168 yr Administrators @DrWeez This usually is OS problem, try to enable some disabled services at OS and also try to re-install sysinfo. As far as I know it happens on cut OS or OS which has too much services disabled. About stability, might help as well, but I know people fixed it by simply re enabling disabled services at 7 for example according to the feedback @Rauf timer error is explicitly ruled out, it is to be found at rules tab Edited October 30, 20168 yr by websmile
November 1, 20168 yr So we are gonna have a problem there... on all my OS, safe mod or not i have "NPROCESSOR IS NOT RECOGNIZED" ... And now you are deleting scores...
November 1, 20168 yr Administrators Exactly - the problem can be solved by enabling services at OS, I did the precheck to find flaws. Also try to reinstall sysinfo, the problem is well known and I had some requests about this, it is os cut too hard or too much processes shut down at msconfig or taskmanager. I thought it is better to check now and make this clear than when comp is over and no one has chance to rebench Once again, time spy has to be shown as valid at least at the fm link, and cpu has to be recognized at link to rule out bugs at readout for all FM benches
November 2, 20168 yr Administrators Hola, important announcement The end date of the qualifier is moved to 10th of november, the decision was made because of problems with GTX1060 for three contestants and in the spirit of fair play and equal chances
November 7, 20168 yr Administrators We have excellent participation, not only on quality but also on quantity. This means it could happen that we have a lot of last minute submissions when people sandbag. We had this before, and I strongly recommend to submit early because we will know no mercy if load is that high you fail to submit last minute - please plan ahead
November 7, 20168 yr Administrators No sandbagging for you, Allen, after you wrote your wife will not give you freetime for Wuhan we disabled your ability to submit for GOC
November 7, 20168 yr anyone experience a thermal shut down at -50 -60? Gpu and PCI_v voltage just drops to 0. never had this with the micron cards, both the Samsung do it? flashed bios etc stock or clocked same thing. is there a coldbug mod or something? with the NVDD power mod the voltage does not drop but you loose picture.
November 8, 20168 yr I have 2x cards. 1x CB (losing picture) at -57*C and nothing helps, second card can run fullpot
November 9, 20168 yr anyone experience a thermal shut down at -50 -60? Gpu and PCI_v voltage just drops to 0. never had this with the micron cards, both the Samsung do it? flashed bios etc stock or clocked same thing. is there a coldbug mod or something? with the NVDD power mod the voltage does not drop but you loose picture. Also have the same issue.. mine at -65*C, i tried everything as well and can't help.. So i just bench it at that temp.. Seems like qualifying is impossible for me since i only have 1 card TT
November 9, 20168 yr Also have the same issue.. mine at -65*C, i tried everything as well and can't help.. So i just bench it at that temp.. Seems like qualifying is impossible for me since i only have 1 card TT yeah it really sucks
November 9, 20168 yr So, my card is dead. I was at 2645MHz@1.41v fullpot, things went well so far...after warming up, drying, remounting and stuff, it booted up to OS, blackscreen happend and that was it. I tried to heat it up more, left it over the night, no signal. Still it was fun, first serious 3d for me and gpu full pot experience. GL to everyone and safe flight to China
November 9, 20168 yr So, my card is dead. I was at 2645MHz@1.41v fullpot, things went well so far...after warming up, drying, remounting and stuff, it booted up to OS, blackscreen happend and that was it. I tried to heat it up more, left it over the night, no signal. Still it was fun, first serious 3d for me and gpu full pot experience. GL to everyone and safe flight to China Bad luck,try to measure voltages and search for damaged components,maybe u can replace them and continue benching ? ....
November 9, 20168 yr I just measured via the measuring points, no volts to PCI_V, GPU_V and 1V8, fine with MEM_V voltage, don't have futher skills to find out where is the problem.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.