March 1, 20169 yr In bios, advanced/USB and enable the options in there I tried this, the result same, even PS2 Keyboard can't move. So maybe my OS Installer is weird. Now i try to install to older PC and move it to skylake and it worked. Thanks for the info BTW
March 1, 20169 yr Is there already a newer BIOS than the 0015 @ Extreme ? For better Samsung B support Latest BIOS is in this thread. Is there a problem now? The xp ready bios, specifically for the gene, do they add IDE option? Sorry only AHCI. I tried this, the result same, even PS2 Keyboard can't move. So maybe my OS Installer is weird. Now i try to install to older PC and move it to skylake and it worked. Thanks for the info BTW If this happens to anyone else, try to turn of the PSU and wait for standby power to clear. Then power up and see if it works.
March 1, 20169 yr Well, i try to turn off the PSU and wait for standby power and cleared. Then power up again still same. Maybe my installer is not clean.
March 1, 20169 yr Administrators Have you tried to downgrade the BIOS? Lately I had feedback that on some new unlock BIOS xp64 was no go for install, maybe it is te same for win7x64, we know that these are not officially supported. OS worked when installed already, the installation of the os itself failed
March 1, 20169 yr I would recommend installing windows on stock error free settings.I tried installing a new win7 x64 few days ago on overclocked settings,not much but still instability was set i guess,and i always received 7F at win7 startup and one time i got into win but stuck like you said.I reinstalled windows again (from DVD so no problems with USB) on stock settings and it worked...
March 1, 20169 yr Newest bios work for both XP32 and -64 on Impact and Extreme. Just make sure you follow the instructions in the guide, many isos you can find won't work without modifications. As for Win 7 I would say your iso is not properly configured. I sometimes loose USB-functionality on the top USB-ports on the Extreme when OC'ing on LN2, but that is not likely to happen at air cooling.
March 1, 20169 yr My iso already adding driver slipstream. I don't know it worked or not, but it can boot to installation screen. And i try with DVD ROM, same result. It looks like my ISO source is not clean.
March 10, 20169 yr Thank you coolice for thia guide. I had a problem with my Asus M8H, i can't set the max cpu ratio with out clock down. At OS, the cpu clock down to 35mhz. C statea disable an another energy saver mode. Any idea? Thank you.
March 10, 20169 yr Administrators Are you sure speedstep is disabled and OS option are at high performance?
March 11, 20169 yr U can press ctrl+f12 for a full saving of bios setting.....is inside oc profiles section....the last option load/save...then ctrl+f12;) Sent from my E2353 using Tapatalk
March 13, 20169 yr 2 things 1) Is there any way to do BCLK OC from within Windows XP..? Turbo Vcore doesn't work for BCLK OC. 2) Does the IGPU not work on the OC BIOSes..? I get no display. Edit:- Actually Enabling Ln2 mode on Impact seems to disable IGP. Anyway to remedy this...? Need it for the Gskill comp. @coolice Edited March 14, 20169 yr by rtsurfer
March 14, 20169 yr Below BIOSes have the only change that they allow for higher voltages without LN2 Mode. The reason why IGPU is disabled in LN2 Mode is because high Core PLL voltage might damage it. Specifically the HDMI output part can be affected. Use with caution. M8E 0017 M8F 0017 M8G 0017 M8HA 0017 M8H 0017 M8I 0017
March 14, 20169 yr Below BIOSes have the only change that they allow for higher voltages without LN2 Mode. The reason why IGPU is disabled in LN2 Mode is because high Core PLL voltage might damage it. Specifically the HDMI output part can be affected. Use with caution. M8E 0017 M8F 0017 M8G 0017 M8HA 0017 M8H 0017 M8I 0017 Can you add higher BCLK support on non-k processors so we can compete with Asrock in XTU? My Impact appears to stop at 102.66 (any higher results in BSOD) which isn't enough against 102.9! Yet to check on my Hero board, but assume it will be the same.
March 15, 20169 yr Crew i felt so sorry for myself installing this lol. So here is a WIN XP 64 clean install ghost for Z170 asus (installed with gene) use symantec ghost 2005 version WinXp 64 .GHO https://drive.google.com/open?id=0B6vAXlOvsVY2QzRCanhQN3M5MlU
April 6, 20169 yr Crew Seems Bios 0015 has some 3D01 perf issues, reverted back to 0007 on the M VIII Extreme. Nature was happy again at 1480FPS versus 1150 on 0015 on GTX 295.
April 6, 20169 yr I tested with 980Ti and is seeing the opposite. Gained about 60 fps going to 0015 from 0007 on M8E.
April 6, 20169 yr Saw same thing with GTX 480. Really bad Nature in 01 and 03. 980 Ti is fine though.
April 6, 20169 yr Crew I tested with 980Ti and is seeing the opposite. Gained about 60 fps going to 0015 from 0007 on M8E. not seeing is believing Jon Seems to be fine indeed with new cards, older stuff needs older bios.. Roman also had perf issues in Nature, old bios fixed it.
April 7, 20169 yr Can you guys help me reproduce this issue? Full settings and setup details please, preferably send me bios profile used as well. What kind of FPS do you expect on GTX480? Don't have one here but I tested with GTX580 and again with 980Ti but Gen 2 forced. See results below. M8E, 6700K, 2x8GB 150x28 (27 cache), 2100 DRAM, Xtreme Tweaking Enabled, FCLK 1GHz XP64 + 364.72 default settings no lod, average of 3 runs 3DM01 Nature GTX 980Ti 0007: 1828fps 0015: 1893fps GTX 980Ti (Force PCIE 2.0) 0007: 1927fps 0015: 1918fps GTX 580 861/2197 0007: 1390fps 0015: 1385fps As you can see on 980Ti 0015 is faster, but forcing Gen 2 boosts both to about the same higher performance. GTX 580 is the same on both for me.
April 7, 20169 yr Incremental update to 0018, increase IGPU voltage limit to 2V+ M8E 0018 M8F 0018 M8G 0018 M8HA 0018 M8H 0018 M8I 0018 M8R 0018
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.