Jump to content

Featured Replies

Would be an awesome thread if results were in the first post..............

 

Hi my first post here. :)

I collected the results given by people on this thread for 7700K on a spreadsheet, batches, vcore, cache freq, ram freq :

 

https://docs.google.com/spreadsheets/d/1rpJaMBwV2MBX7_PQr2JTXAQmgfrRMuTK4R3Zod2JIuU/edit#gid=0

 

I haven't given the names of most of the owners due to some laziness (except for massman given the number of cpus he tested :D ).

I also used as other sources a topic on the french forum hardware.fr + some collected from reviews of 7700K.

Stability test is CB R15 usually, and if other tests have been used I quote them.

 

Feel free to give me corrections ! That took some work so there are probably som errors in the Table.

 

So there are 70+ cpu on the spreadsheet.

It is difficult to draw firm statistical conclusions because the L939 is overrepresented and for other batches there are two few cpus.

But overall, if one insists on drawing a conclusion L643 and L639 seem to be good batches.

 

best

pkv

Edited by pkv

  • Replies 262
  • Views 56.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • speed.fastest
    speed.fastest

    Sounds like golden chip, the best i have seen on facebook is 5ghz 1.14v

  • speed.fastest
    speed.fastest

    My CPU, L639F Batch, vid 1.168v (On Asus), not delidded, try to find max clock that i can validate to CPU-Z. Vcore 1.475v (LLC Lv6, stable at 1.475v). Cooler Custom Water 3x120 Ambient about 26-28 Cel

  • Cache seems typical to Skylake or even worse,among the cpu's i tested for 5000 cache lowest ones were with 1.30-1.31,4800 worked ok for 1.23-4 tough. Best cpu ever i touched would not crush when set 5

  • Author
I have everything in the excell sheet, need rights to edit the first post

 

Be my guest, i personally dont have the time.

 

Or could a link be made in the OP to a specific post with all the data??

very similar as my L643 (but my cooling is lower section, Slim TD02 Silverstone)

 

 

 

Updated with batch,forgot that.

Same as yours. :)

Any other results obtained with it ?

 

If i test with lower value Avx i obtain even better voltage,we should set a standard before it's too late.

 

 

 

 

Sent from my iPad using Tapatalk

I have everything in the excell sheet, need rights to edit the first post

 

my previous post with the link to my spreadsheet seems to be in moderation limbo since it is my first post.

So I had not seen yet your post about your excel sheet.

:(

 

My excel includes also other sources, external to here.

 

Discussion on french BB where I first posted an excel :

 

≈≈ KABY LAKE & SKYLAKE LGA 1151 - 5G H24 pr TOUS ? – OC Crew ≈≈ - Page : 81 - CPU - Overclocking, Cooling & Modding - FORUM HardWare.fr

L639F977 -- VID - 1.136v Not Delidded

ASUS M8I - Ambient Custom Loop Rx360-Pull

I'll update with screens tonight.

 

50/46 - 1.2v R15

51/46 - 1.28v R15

52/46 - 1.36v R15

Edited by hotrod717

I have everything in the excell sheet, need rights to edit the first post

 

You should now be able to do it :)

L639F977 -- VID - 1.136v

 

50/46 - 1.2v R15

51/46 - 1.28v R15

52/46 - 1.36v R15

 

guys, please write your cooling also and info if is it delided/not delided

First tests with new ASR ES NS·bin cpu

Motherboard: ASRock M·OCF bios 7.21B

CPU: Delidded w/ T.Grizz top and bottom

Batch: L631F623 (ES)

Cooling: AIO (no fan) next to window.

>3-4C lower than ambient room temps

Load Level 1 (highest LLC)

VID: 1.200v

 

50/45 1.152v (CPU·Z) 1.155v (AFD) one run stable

50/45 1.168v (CPU·Z) 1.170v (AFD) multi run stable

52/45 1.280v stable didn't try lower

52/50 1.296v (CPU·Z) 1.300v (AFD)

53/45 1.328v (CPU·Z) 1.335v (AFD)

>1.325v (AFD) passed one run

>1.310v (AFD) threw common CBR15 error code window, more than half finished.

> Screenshot still on that rig, quit here. Will add to Imgur Album later

 

9fQ7caD.png

evU9a3a.png

 

 

Kaby L631F623 (es) R15 bin - Album on Imgur

 

TO DO: ADD VID - DONE

Edited by GtiJason

Does Cinebench use AVX ?

 

No, it does not, AVX offset does not kick in when doing CB15, but with XTU on the other hand, it does.

:)))),this is because of me .

 

New Cpu ,batch L644xxxx

Llc 5 ,custom watercooling with 2x480 rad,22 degrees ambient,delided,M8E.

 

Cinebench at 4.5 cache/3200 ram

5.0 @ 1.20v pass

5.1 @ 1.25v pass

5.2 @ 1.31v pass

5.3 @ 1.38v pass

 

5/5/3200 @ 1.32v pass

Vid - 1.136 on Asus ,1.104 on Asrock

 

Album : 7700 k 2nd - Album on Imgur

 

 

 

Sent from my iPhone using Tapatalk

Edited by suzuki

After little playing with my cpu (delided):

Asrock z170 oc formula 7.40

aio watercooling H110 :

5/4.5 - 1.2v bios 1.184v real (llc2) max temp 50C°

5.1/4.5 - 1.23v bios 1.216v real (llc2) max temp 53C°

5.2/4.5 - 1.26v bios 1.248v real (llc2) max temp 56C°

5.3/4.5 - 1.35v bios 1.328v real (llc2) max temp 63C°

5.3/5 - 1.37v bios 1.39v real (llc1) max temp 69C°

After little playing with my cpu (delided):

Asrock z170 oc formula 7.40

aio watercooling H110 :

5/4.5 - 1.2v bios 1.184v real (llc2) max temp 50C°

5.1/4.5 - 1.23v bios 1.216v real (llc2) max temp 53C°

5.2/4.5 - 1.26v bios 1.248v real (llc2) max temp 56C°

5.3/4.5 - 1.35v bios 1.328v real (llc2) max temp 63C°

5.3/5 - 1.37v bios 1.39v real (llc1) max temp 69C°

 

wonderful :celebration:

which batch ?

Tested L639G CPU vid 1.12-1.136v, all of them did at least 6775MHz R15 with F1 Dark. For 6.8GHz+ R15 surprised me that vid 1.136v did it, even 6.8GHz only 1.75v R15 with Apex :D

So anyone else have a VID thats higher than 5g stable ?

My cpu is 50/45 1.168v (CPU·Z) 1.170v (AFD) multi run stable

My VID is 1.200v

  • Administrators

Not sure, VID seems to vary with board and method of reading it (standard clear cmos or set to offset and then do readout after reboot). I have a cpu that shows 1,184v vid at first method and 1,200 at second on mocf and does 1,184v 50/45 with 4k c12 undelidded air.

  • Author

Batch# L643G VID 1.156v

On Apex LLC set to level 5

X45 cache, 3600 mems

 

5000 mhz 1.184v

5200 mhz 1.285v

 

Not delided and on water

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...