davidm71_2 Posted May 31, 2020 Posted May 31, 2020 (edited) So just updated to 2301 Dsanke bios from one of his older releases. Wasn’t sure how but Dsanke helped me out and pointed me in right direction. Basically all you got to do is use Fptw64 to just flash the bios region. Didn’t need flashback or anything complicated. First had to unlock the Asus bios lock using an Efi shell. Full instructions can be found here: https://www.win-raid.com/t3908f16-GUIDE-Grub-Fix-Intel-FPT-Error-or-BIOS-Lock-Asus-Other-Mod-BIOS-Flash.html. Also to save you time the bios lock is located at 0x939. Hopefully next release will have bios lock unlocked. Edited May 31, 2020 by davidm71_2 Quote
davidm71_2 Posted June 7, 2020 Posted June 7, 2020 Just updated the microcode on the Apex IX Dsanke 2301 rom for 906-EC to version D6 from version CA. Sorry I only updated one microcode for my 9700K but I think it should work on the 9900K as well. Also may have removed the Asus Bios-Lock. Just flashed and can confirm its a working rom: http://www.mediafire.com/file/0ydhw2ruesg7y6q/ROG-MAXIMUS-IX-APEX-ASUS-2301-D6-Unlock.7z/file Quote
mulitpass Posted June 19, 2020 Posted June 19, 2020 (edited) for 7700k, bios mod is needed to flash modded bios , but is pcie mod (nuvoton chip) needed to boot like for the 8 and 9 gen cpus? OR both needed for modded bios to work correctly even for 7700k ? also, ok to flash modded bios to 2nd bios chip and leave original bios using bios switch? Edited June 19, 2020 by mulitpass Quote
ducegt Posted June 19, 2020 Posted June 19, 2020 10 hours ago, mulitpass said: for 7700k, bios mod is needed to flash modded bios , but is pcie mod (nuvoton chip) needed to boot like for the 8 and 9 gen cpus? OR both needed for modded bios to work correctly even for 7700k ? also, ok to flash modded bios to 2nd bios chip and leave original bios using bios switch? You only need the BIOS flashed to use a 7700K. And it's okay to leave the other BIOS original. I did this myself in the past. 1 Quote
ShervinGreen Posted June 23, 2020 Posted June 23, 2020 Hi, coffee mod Apex IX to Apex X was successful. Now running with 9700K I would like to mod HERO IX to HERO X. Has someone tried it already? Quote
davidm71_2 Posted June 24, 2020 Posted June 24, 2020 8 hours ago, ShervinGreen said: Hi, coffee mod Apex IX to Apex X was successful. Now running with 9700K I would like to mod HERO IX to HERO X. Has someone tried it already? I also have Apex IX + 9700K. Wonder how are your vid voltages and luck with over clicking? Quote
ShervinGreen Posted June 24, 2020 Posted June 24, 2020 4 hours ago, davidm71_2 said: I also have Apex IX + 9700K. Wonder how are your vid voltages and luck with over clicking? Pretested 9700K works fine at 5,0 GHz without AVX offset, 1,35v Vcore. Quote
davidm71_2 Posted June 24, 2020 Posted June 24, 2020 8 hours ago, ShervinGreen said: Pretested 9700K works fine at 5,0 GHz without AVX offset, 1,35v Vcore. What about adaptive mode? What bios version build are you using? Thanks Quote
AlexRay Posted June 28, 2020 Posted June 28, 2020 (edited) So, if I will use USB Flashback method for my IX APEX, what exactly it's filename should be? creative.rom (from 1st page here), M9A.CAP (as asus.com says), M10A.CAP (as BRenamerl did it)? Will ROG-MAXIMUS-IX-APEX-ASUS-2203.ROM work with SRG15 CPU (9700K R0 Revision)? MC Extractor says 2203 has: 5 │ 906ED │ 22 (1,5) │ B8 │ 2019-03-17 │ PRD │ 0x17C00 │ 0xBD3470 and for 2301: 5 │ 906ED │ 22 (1,5) │ CC │ 2019-12-12 │ PRD │ 0x18800 │ 0xBD3C70 Edited June 28, 2020 by AlexRay Quote
rotsihylop Posted June 28, 2020 Posted June 28, 2020 On 3/6/2019 at 5:59 PM, Moonman said: Maximus VIII Impact running with 9900K, should be no issue with 8700K/8086K. CPU Pad Mod I just made. 2 pins isolated as per attached image. Flashed with programmer. If you need bios, let me know. Hi Moonman, Can I have the Bios for my Maximus VIII Impact to work with an i9-9900K R0 Stepping? I have followed video instructions by Luumi on YouTube and came here to get all the required tools. However there seems to be a problem with the latest CoffeeLake MOD tool, as well as a problem with dragging the bios file to the SyncAllCoreRatio program. Many thanks! Quote
rotsihylop Posted June 28, 2020 Posted June 28, 2020 Anyone has a bios to let my Maximus VIII Impact to work with an i9-9900k R0 Stepping? Thanks in advance! Quote
gkmltd Posted June 29, 2020 Posted June 29, 2020 On 6/28/2020 at 6:09 PM, rotsihylop said: Anyone has a bios to let my Maximus VIII Impact to work with an i9-9900k R0 Stepping? Thanks in advance! Here u go https://easyupload.io/pzjvkh Quote
SparkysAdventure Posted June 30, 2020 Posted June 30, 2020 Apparently, 4666 14-13 has been done with A0 memory on the Crosshair VIII Impact. Also, @sabishiihito almost got 4800c14 working on an Apex IX using an Apex X bios. Could somebody try to put the two together? Quote
ShervinGreen Posted July 1, 2020 Posted July 1, 2020 (edited) On 6/24/2020 at 5:23 PM, davidm71_2 said: What about adaptive mode? What bios version build are you using? Thanks also no problem. It runs for a few days without any issues. Bios Version is 2203 from dsanke 2301 works too Edited July 1, 2020 by ShervinGreen add bios info Quote
jjxaker Posted August 13, 2020 Posted August 13, 2020 New Mod by dsanke ROG-MAXIMUS-IX-APEX-ASUS-2402.7z 1 Quote
antome Posted August 13, 2020 Posted August 13, 2020 18 minutes ago, jjxaker said: New Mod by dsanke ROG-MAXIMUS-IX-APEX-ASUS-2402.7z 7.26 MB · 1 download tank you, changelog? 1 Quote
ShervinGreen Posted August 18, 2020 Posted August 18, 2020 Has anyone mod bios for Maxumus IX Formula ??? Quote
SparkysAdventure Posted August 18, 2020 Posted August 18, 2020 @jjxakermaybe this bios has trace centering or tXP/PPD? Quote
Mayk-Freak Posted September 12, 2020 Posted September 12, 2020 On 8/13/2020 at 5:25 PM, jjxaker said: New Mod by dsanke ROG-MAXIMUS-IX-APEX-ASUS-2402.7z 7.26 MB · 36 downloads many thanks Quote
bartx Posted September 13, 2020 Posted September 13, 2020 Any hints for overclocking the A2 memory above 3600? I was able to run SPI32M and R20 on 3866 C14 1T, but above 3600 it's extremely unstable. Usually there is Not exact in round error before initial loop, sometimes setting some voltages help to stabilize it. I've found in some cases that increasing the DMI voltage from 1,26 to 1,40V helps making it stable up to 3866, but after next boot I was getting errors again. Funny thing is that it's booting into Windows easily even on 4000C14 1T. I'm running 9600k and Apex IX with 2402 Apex X bios, it will be my daily rig so no big issue with this ram speed, I've just wanted to know if there is any solution for this. Quote
Crew Leeghoofd Posted September 13, 2020 Crew Posted September 13, 2020 Using Maxmem ? otherwise loosen to Cas 15 or even 16 for daily usage This is one of the biggest culprits of B-Die, its nice to tweak but you loose nearly 75% of your memory capacity to be bench stable, read not even daily stable for gaming or such Quote
bartx Posted September 16, 2020 Posted September 16, 2020 (edited) On 9/13/2020 at 12:41 PM, Leeghoofd said: Using Maxmem ? otherwise loosen to Cas 15 or even 16 for daily usage This is one of the biggest culprits of B-Die, its nice to tweak but you loose nearly 75% of your memory capacity to be bench stable, read not even daily stable for gaming or such No Maxmem, I'm looking for daily settings. At least 9600k is running very nice - 5.1GHz on 1.24V. Looks like above 3466c15 1T is no go on A2 combined with Z170/Z270 chipset. I had exact the same weird behaviour on Ranger VIII, in this case I thought that it's the board issue. 3466C15 is rock stable on Apex IX, but above it might be rock stable, might be 55 error, or it can boot, but Spi32M will show errors in first 2-3 loops. Too much pain for daily rig Edited September 19, 2020 by bartx Quote
serpent_710 Posted September 23, 2020 Posted September 23, 2020 Hi! First of all I would like to thank everyone! This made it possible for me to mod my Maximus IX Apex myself. At first, everything seemd to be fine but unfortunately it came to a problem. I've installed the i7-9700k (R0 stepping) and flashed the BIOS from dsanke (ROG-MAXIMUS-IX-APEX-ASUS-2402) (great job dsanke!). System started and booted to bios ( yay ) So I decided to install my gpu (asus rog gtx1080), closed the case and wanted to proceed with os installation. At this point, the board is not starting anymore . The aura leds are on, but if I press the start button (board or case), I noticed that the system wants to start up for about 200ms. I barely see the flashing LED from my Corsair AIO (H100i Pro). My first thought was, that something is wrong with my soldering. I've resoldered the mod (bios & cpu pad) on the motherboard and flashed the BIOS again. No improvement. So I decided to remove the cpu pad mod, install the i7-7700k and flash the original BIOS (1302). Same problem as I mentioned before. Aura leds are on, system is unable to start. I also installed the speaker. Status leds are off (cpu, ram etc.) and no codes are shown at the 7 segment display. My assumption is that something is shorted or even broken. I've no idea where I should start to search for the problem. Maybe somebody has some tips or ideas that could help me. Thanks a lot in advance. Quote
SparkysAdventure Posted September 23, 2020 Posted September 23, 2020 @bartx If referring to IX Apex, I do believe there is a trick to getting 4000/4133c12 working with A2 memory. tWCL 14, tWRRD_sg/dg 26/21 looser. Should work with 1t. Quote
Noxinite Posted September 23, 2020 Posted September 23, 2020 1 hour ago, Sparky's__Adventure said: @bartx If referring to IX Apex, I do believe there is a trick to getting 4000/4133c12 working with A2 memory. tWCL 14, tWRRD_sg/dg 26/21 looser. Should work with 1t. I think @davestarrr got A2 working on the IX. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.