Hazzan Posted July 16, 2012 Posted July 16, 2012 3218C01XX is MONSTER-BATCH! Just found 3218C017 #1061 (bought tray) 5 GHZ @1.288V 5.1 GHZ @1.384V 5.2 GHZ @1.45V but getting too hot (app crash loop12@76°C...don't wanna fry this baby...) I think 5 GHZ low voltage chips are running really good under LN2 almost always as long as you don't hit any MHZ-wall. I have heard of this now a couple of times... 1.375V are still pretty good(!!!) 6.6GHZ @1.75V LN2 for such a chip...but very "wally" after that voltage on this certain example. I have some same week chip with 1.45V here - as long as it scales I don't mind 6.7 - 6.8 Detected chip....nice one.. my chip on air cooling 5 Ghz just need 1.235 volt 4C/8T L215B Quote
Splave Posted July 16, 2012 Posted July 16, 2012 6.8ghz chip now has cold bug....IMC is done ftl suxors Quote
Gunslinger Posted July 16, 2012 Posted July 16, 2012 US Intel RMA warehouse in Louisville is out of stock for replacement 3770K's until 7/19. Quote
splmann Posted July 16, 2012 Posted July 16, 2012 (edited) 3218b975 seems to be a good memclocker http://valid.canardpc.com/show_oc.php?id=2439823 Edited November 7, 2012 by splmann Quote
Crew Leeghoofd Posted July 16, 2012 Crew Posted July 16, 2012 Nice work Roger, but I think Christian Ney did this. One of the reasons he got a vacation First break the WR, then go on holiday Quote
K404 Posted July 17, 2012 Posted July 17, 2012 (edited) 3220B691: crap. It does appear to run cool though. Question (for everyone)! At 5GHz, What kinda temps are people seeing, both idle and load? (also need to know how many cores) Edited July 17, 2012 by K404 Quote
Splave Posted July 17, 2012 Posted July 17, 2012 3 more today think this will be the last I buy Quote
TaPaKaH Posted July 17, 2012 Posted July 17, 2012 (edited) Depends on the cooling. With something like TRUE the 1.3V chips are usually around high-30ies idle, high-50ies load and 1.4V chips are ~40 idle and low-70ies load. I got a 3218B to do this on aircooling, but it was not binned by myself. http://valid.canardpc.com/show_oc.php?id=2439486 http://valid.canardpc.com/show_oc.php?id=2437518 But for some reason, the chip won't pass 32M at 1400 or HCI memtest above 1330. Edited July 17, 2012 by TaPaKaH Quote
M.Beier Posted July 17, 2012 Posted July 17, 2012 Depends on the cooling. With something like TRUE the 1.3V chips are usually around high-30ies idle, high-50ies load and 1.4V chips are ~40 idle and low-70ies load. I got a 3218B to do this on aircooling, but it was not binned by myself. http://valid.canardpc.com/show_oc.php?id=2439486 http://valid.canardpc.com/show_oc.php?id=2437518 But for some reason, the chip won't pass 32M at 1400 or HCI memtest above 1330. Hmm, either I am doing it WRONG, or those load temps cant be true.... 1.25v = 70C+ here.... 4.7ghz p95 12-12 AVX. Quote
splmann Posted July 17, 2012 Posted July 17, 2012 Does it go higher than 1480 on air? http://hwbot.org/submission/2297140 Quote
Splave Posted July 17, 2012 Posted July 17, 2012 2x L223B661 1x L221B598 Testing tonight and tomorrow Quote
Crew Vivi Posted July 17, 2012 Crew Posted July 17, 2012 2x L223B6611x L221B598 Testing tonight and tomorrow you can do it splave! I never get excited about malay's but hey . Quote
DOM. Posted July 17, 2012 Posted July 17, 2012 i have a L221A that cant boot 50 unless with 1.4-1.45v but 4.9 with 1.3v Quote
Viss Posted July 18, 2012 Posted July 18, 2012 3x 3218C017. First chip boots 50x100 4/8 on air @ 1.28v. No CB/CBB: Quote
splmann Posted July 18, 2012 Posted July 18, 2012 3x 3218C017. First chip boots 50x100 4/8 on air @ 1.28v. No CB/CBB: This 3218C Batch looks nice Quote
I.M.O.G. Posted July 18, 2012 Posted July 18, 2012 Got a MVE to replace the MVG... 3218B957 6.46GHz@1.944V Weaker than my L204B321 that does 6.3+@1.8V Testing 3218B958 tomorrow Quote
Rosty Posted July 18, 2012 Posted July 18, 2012 Batch 3218C021 32m on air 5000mhz 1.272v c4 5000mhz 1.280v c4/8t 5100mhz 1.344v c4/8t 5200mhz 1.456v c4/8t 5300mhz 1.520v c4/8t nice chip Quote
Viss Posted July 18, 2012 Posted July 18, 2012 So far my lowest vcore @ air chips were not the best when cold, my best LN2 chips all need 1.35-1.40v for 50x100 4/8 boot @ air. Quote
Splave Posted July 18, 2012 Posted July 18, 2012 well my notorious brown hand has struck again.... 6.4ghz ---- 6.4ghz ---- 6.25ghz.....and thats just cpu-z valids Quote
Crew Vivi Posted July 18, 2012 Crew Posted July 18, 2012 well my notorious brown hand has struck again.... 6.4ghz ---- 6.4ghz ---- 6.25ghz.....and thats just cpu-z valids malays suck ass Quote
Gunslinger Posted July 18, 2012 Posted July 18, 2012 Intel Europe (or Germany not sure where they send the chips in the end) out of RMA-CPUs for 1-2 weeks LOL... Just got an email today, stock now pushed out until 7/24/12. At this rate I'll get the other 3 RMA'd about the same time as the next architecture release... Quote
Splave Posted July 18, 2012 Posted July 18, 2012 lol damn man, marvin gave me his number to call him tomorrow and get advanced rma going but it looks like that is pointless now.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.