July 16, 201212 yr 3218C01XX is MONSTER-BATCH! Just found 3218C017 #1061 (bought tray) 5 GHZ @1.288V 5.1 GHZ @1.384V 5.2 GHZ @1.45V but getting too hot (app crash loop12@76°C...don't wanna fry this baby...) I think 5 GHZ low voltage chips are running really good under LN2 almost always as long as you don't hit any MHZ-wall. I have heard of this now a couple of times... 1.375V are still pretty good(!!!) 6.6GHZ @1.75V LN2 for such a chip...but very "wally" after that voltage on this certain example. I have some same week chip with 1.45V here - as long as it scales I don't mind 6.7 - 6.8 Detected chip....nice one.. my chip on air cooling 5 Ghz just need 1.235 volt 4C/8T L215B
July 16, 201212 yr US Intel RMA warehouse in Louisville is out of stock for replacement 3770K's until 7/19.
July 16, 201212 yr 3218b975 seems to be a good memclocker http://valid.canardpc.com/show_oc.php?id=2439823 Edited November 7, 201212 yr by splmann
July 16, 201212 yr Crew Nice work Roger, but I think Christian Ney did this. One of the reasons he got a vacation First break the WR, then go on holiday
July 17, 201212 yr 3220B691: crap. It does appear to run cool though. Question (for everyone)! At 5GHz, What kinda temps are people seeing, both idle and load? (also need to know how many cores) Edited July 17, 201212 yr by K404
July 17, 201212 yr Depends on the cooling. With something like TRUE the 1.3V chips are usually around high-30ies idle, high-50ies load and 1.4V chips are ~40 idle and low-70ies load. I got a 3218B to do this on aircooling, but it was not binned by myself. http://valid.canardpc.com/show_oc.php?id=2439486 http://valid.canardpc.com/show_oc.php?id=2437518 But for some reason, the chip won't pass 32M at 1400 or HCI memtest above 1330. Edited July 17, 201212 yr by TaPaKaH
July 17, 201212 yr Depends on the cooling. With something like TRUE the 1.3V chips are usually around high-30ies idle, high-50ies load and 1.4V chips are ~40 idle and low-70ies load. I got a 3218B to do this on aircooling, but it was not binned by myself. http://valid.canardpc.com/show_oc.php?id=2439486 http://valid.canardpc.com/show_oc.php?id=2437518 But for some reason, the chip won't pass 32M at 1400 or HCI memtest above 1330. Hmm, either I am doing it WRONG, or those load temps cant be true.... 1.25v = 70C+ here.... 4.7ghz p95 12-12 AVX.
July 17, 201212 yr Crew 2x L223B6611x L221B598 Testing tonight and tomorrow you can do it splave! I never get excited about malay's but hey .
July 18, 201212 yr 3x 3218C017. First chip boots 50x100 4/8 on air @ 1.28v. No CB/CBB: This 3218C Batch looks nice
July 18, 201212 yr Got a MVE to replace the MVG... 3218B957 6.46GHz@1.944V Weaker than my L204B321 that does 6.3+@1.8V Testing 3218B958 tomorrow
July 18, 201212 yr Batch 3218C021 32m on air 5000mhz 1.272v c4 5000mhz 1.280v c4/8t 5100mhz 1.344v c4/8t 5200mhz 1.456v c4/8t 5300mhz 1.520v c4/8t nice chip
July 18, 201212 yr So far my lowest vcore @ air chips were not the best when cold, my best LN2 chips all need 1.35-1.40v for 50x100 4/8 boot @ air.
July 18, 201212 yr well my notorious brown hand has struck again.... 6.4ghz ---- 6.4ghz ---- 6.25ghz.....and thats just cpu-z valids
July 18, 201212 yr Crew well my notorious brown hand has struck again.... 6.4ghz ---- 6.4ghz ---- 6.25ghz.....and thats just cpu-z valids malays suck ass
July 18, 201212 yr Intel Europe (or Germany not sure where they send the chips in the end) out of RMA-CPUs for 1-2 weeks LOL... Just got an email today, stock now pushed out until 7/24/12. At this rate I'll get the other 3 RMA'd about the same time as the next architecture release...
July 18, 201212 yr lol damn man, marvin gave me his number to call him tomorrow and get advanced rma going but it looks like that is pointless now....
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.