Submission & member moderation

Sorry to bother you again folks but screwed up the below sub: ======= Hello, One of your submissions has been reported as incorrect by an HWBOT member.Please check whether the problem is valid and can be resolved. This was the reason the user gave: reported by user due to wrong hardware match The reporting user also noted: no 4x cpu The submission:wPrime - 32m - 12sec 715ms - funsoul - Core 2 E8500 (3.17Ghz) @ 5796MHz Yours sincerely, the hwbot.org team ======== Made the mistake of "prepopulate fields by previous submission" from my last q6600 run The edit/delete option isn't showing as available. How can I delete it? tia!

Hi Folks Got my very first blocked submission. Below are the email I received (I took out the mod's name...not sure of the 'privacy' protocol) and a screen of the submission. I don't really see anything wrong with the submission and it seems pretty much in-line with the others at that speed. Sure...I probably ran it 30+ times but... Whatcha think? Here's the text of the email received: Hello, An HWBOT moderator, "<moderator name removed>", has blocked one of your submitted scores. It has marked one of your submissions as 'impossible score at given settings, possible bug or other'. This was the reason the user gave: //bugged (A<B<C)…

Hi guys! I will not waste time. My submission of Catzilla 720p with my GTX 580 (http://hwbot.org/submission/2592621) was reported and bloqued. the excuse is because i have PhysX enable. Ok, no problem, but I was looking for other submission of a lot of members and have the physx enable, but his submission´s are not bloqued. It´s not a problem with another member, but what is the difference between my submission and another? hope you can help me and give me an answer. Thank you!

i have some problems whit superpi scores ar not corekt ranked by the engin. a slower score piks the engin as my fastest score my slower 7m 22.551s http://hwbot.org/submission/2583720_skulstation_superpi___32m_pentium_g3258_7min_22sec_551ms my faster 7m 08.841 http://hwbot.org/submission/2584283_ as i know 7m 08.841 is faster as 7m 22.551 and this superpi 1m is not ranked http://hwbot.org/submission/2584281_ the link of my best score gives me a Oops. Something went wrong. We could blame this on you but it`s most likely our crappy coding skills. You could try again or nudge our developpers for fixing this.

Hi, I simply can not figure out which hardware to list this as. It is in my laptop a HP Elitebook 8570P. Its listed as AMD Radeon HD 7570M in GPUz as well as on futuremark. It has 1GB dedicated DDR5 Memory and is listed as sitting in the PCIE and the GPU is listed as Thames should I use ATI Mobility Radeon 7500 PCI or AMD Radeon HD 7570 (without the M) or is there a category missing that should be called AMD Radeon HD 7570M. Need some help as I dont want to mess up all the score sheets while taking part in the las month of Rookie league :-) See below the dump from AMD Catalyst Name AMD Radeon HD 7570M PNP Device ID PCI\VEN_1002&DEV_6841&am…

Hi, I have found these: in database there are two motherboards: 775v88 and 775v88+ After search it , the sites for these motherboards are bounded some way. (775v88 is directing to 775v88+). (There are two AsRock motherboards in real) I have also some bugged results: http://hwbot.org/submission/2507312 - No HTPP http://hwbot.org/submission/2525130 - No HTPP http://hwbot.org/submission/2525135 - No HTPP http://hwbot.org/submission/2525139 - No HTPP http://hwbot.org/submission/2525140 - No HTPP Recalculating makes no difference. Why is it bugged? Few weeks ago everything was working

Hi, I have just noticed that on all my CPU freq subs that the validation link is missing. I have also checked on numerous other subs from random members and the same thing! Anyone know what happend?

Hi Guys, I did do a quick search but couldn't find what I was after. Usually after submitting some new/better scores the league position usually updates within an hour (for me at least). Yet Subs that i did yesterday are in my HW scores (Top 20) haven't gone on to my Enthusiast League score yet. Then after submitting some more scores this afternoon I should be around the 512 point mark, not 476. I realise it's a hugely busy time ATM with Computex and the like but I just wanted to check in on this issue. Edit - BTW hope this is the right spot to post this ?

I uploaded 2 3DMark for android benchmarks but i dont know how to validate them since 3Dmark for android doesnt give you a link to their database

Not sure if this is the right place to ask this and I am almost certain this has been asked before, but if a water chiller has been used does the user then have to move to thr OC league as their submissions are made using sub ambient cooling? Thanks for your time.

One of the moderator's (Christian Ney) has blocked/deleted one of my results. Specifically this result: http://hwbot.org/submission/2493048_yamaharacer19_ucbench_2011_core_2_p8400_(2.26ghz)_307.1_mpt_score Here's why they did that: "Make sure your Pwds. Checked are in ascending order, otherwise it is a bugged score." As you can see in my SS, my results window shows in ascending order, as well as the link to the results at the creator's website: http://anrieff.net/ucbench2011/viewitem.php?id=5524 I have looked through the rules of this benchmark and I never changed benchmark mode. All I changed was the thread count and instruction set. Please review my case and if you ha…

While browsing I noted a mix of 9600 Phenom chips being in the same class as 9600 BE chips with entries shown, no actual 9600 BE class seems to exist that I can tell - I've seen the 9600 and 9600B classes pop up with a search but no 9600 BE class popped up at all. I know the 720 and 720 BE chips for example are indicated as separate classes with the BE chips having a clear advantage, hence these being in different classes. Could it be the "B" class was supposed to be the BE class? I know there were B versions of the 9600 to correct the errata bugs in earlier versions and was thinking this was the case here with the 9600 B class itself. Probrably an oversigh…

Hello, Yesterday I posted Submissions made ​​with dice but I have not changed my league. I thought it was automatic, right? thank you

I want to submit my XTU score from the benchmark I just ran. When I click submit I get this: No client version given, required version: 4.2.0.8 ..and so it doesn't let me submit.

When comparing my xtu results with others I don't see any temp records even though xtu clearly records highest temp. where is it?

When I click on the delete button in my submission details it doesn't do anything. The browser timer just spins forever. Other buttons work fine.

Hi, I want to ask: is it allowed or not to use 3930K ES CPU in Xtreme OC League now or only latest ES CPUs are not allowed (3970X/3770K)?

NVM.

Hi! I have a little problem with validation my result in 3dmark06 for MSI Precision Master OC contest. My result has been reported as incorrect by an HWBOT. This was the reason the user gave: "setting not visible, no subtest scores" I used 3Dmark06_v120_1901 for test, but unregistered yet. But I was logged on " http://www.3dmark.com/" and it said "VALID RESULT" You can see my result here http://www.3dmark.com/3dm06/17563012 And here you can find partition named "DETAILED SCORES" with all subtest scores and one more partition named "SETTINGS" and line "Default settings used - Yes" As i understand, using unregistered version of 3Dmark06 you can not use custom s…

Hi Over the last month I have 19 submissions worth 174.4 points but my league postion has not changed. A session 9 hours ago brought in the most with approx 140 in HW points. Why is this?

Hello Guys! http://hwbot.org/submission/2508881_ The submission was made with a 5750 and not with a 6750 as you can also see in the screenshot. Even if a 6750 is just a relabeled 5750 ... this wasn't one. Maybe there is a way to fix this?

Could I put back in the enthusiasts league please, accidently selected the wrong cooling type when submitting sub and got placed in the extreme league.

So I have an R9 290 and an R9 290X in crossfire and I'm not sure if I should submit under R9 290X crossfire or R9 290 crossfire?

Exactly as the title. Many here have it working but sadly I cant get it scaling at all. SO the question is how did you guys get this working.

it's write: size must be between 3 and 50 but my nick 12. Please fix this problem