Jump to content

Featured Replies

I like it! Will you be testing the better samples for higher frequencies (5GHz)?

 

Yeah sure!

But maybe have to wait a while since these cpus will be used for an Indonesian amateur oc tournament next week :)

  • Replies 491
  • Views 175.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Axxzyaun
    Axxzyaun

    6600K  delidded air cooling,5g 4.8 r11.5 1.263v on mocf

  • 18 pcs of ES: just 5 chips booted 5 ghz Win7:   Retails soon

  • My retail i5-6600K. About scalping: http://www.modlabs.net/blogs/i5-6600k  

L520B668

VID: 1,280V

extremely stable @ 4,6 GHz & 1,39V - passing AVX2 Airi y-cruncher, Handbrake transcoding 1080p h.264 -> 1080p h.265 24/7

stable Cinebench and Aida64 manytimes @ 4,8 GHz & 1,43V

Windows boot @ 4,9 GHz & 1,48V

...on Maximus VIII Gene with Kingston HyperX Predator HX430C15PBK4/32 - 32 GB @ 3 GHz & 15-16-16-39-2T and Corsair H100i GTX (3000 RPM)

 

rsz_1skylake_gene_1.jpg

ultratest_1.png

ultratest_2.png

Cinebench_4800MHz.png

hello :)

 

first pretest on air :

 

 

cpu type :6700k

batch: L519B743

mobo/bios : M8G / 508

vid in bios : 1.28vc

delid or not : no delid

 

ambiant T°25/28°, cooled with a NH-d14+mx4 : nb x40, xtu full run @4.8 for 1.4vc and cinebenchs @4.8 for 1.37vc

 

batch: L524B542

mobo/bios : M8G / 508

vid in bios @stock: 1.264vc

delid or not : no delid

 

ambiant T°25/28°, cooled with a NH-d14+mx4 : nb x40, unstable xtu full run @4.8 for 1.4vc, cinebenchs @4.8 for 1.37vc stable

 

testing in this week with my cascade

Hi guys, i'm testing a 6700k cpu Batch#L520B669

 

1,31VID - 4.6ghz@1,30v (cinebench).

 

But i've a problem, in idle state the cpu always scale down to 40x. I've disabled speedstep and c-state, only turbo mode enable, but always scale down.

I miss somethings?

Very high vid frank....try if you can boot at 5ghz...and your max xtu stable on air/wc....if you are under 4.8 u can sell it

Tested 2 pcs 6700K, L523B383

 

#1 VID 1.312V. 4.7G CineBench 1.40V

#2 VID 1.292V. 4.7G CineBench 1.38V. (4.8G CineBench 1.45V).

 

XTU on both chips requires an additional 0.01mv. No delid.

Hi guys, i'm testing a 6700k cpu Batch#L520B669

 

1,31VID - 4.6ghz@1,30v (cinebench).

 

But i've a problem, in idle state the cpu always scale down to 40x. I've disabled speedstep and c-state, only turbo mode enable, but always scale down.

I miss somethings?

 

Update

4c/8t 4,7ghz@1,40v XTU

4c/4t 4,9ghz@1,50c SPI32M

anyone else get really weird scaling with their CPU?

 

My 6700K can easily do 5.5GHz with less than 1.6v XTU stable, but 5.6GHz 4c/8t isn't stable on even Cinebench at any volts, just the strangest thing and not sure where my issue lies........

 

If it's the CPU then will just get the 5.5GHz XTU run done and sell on.

Sounds like a voltage issue... Where are PLL volts?

 

In the right place xD:P No combination of PLL volts makes a difference, at full pot vs -120c at 5.5GHz it acts the same, second it gets to 5.6GHz it's a no go... don't want to give up on the CPU but running out of LN2 here xD

Nope, but doubt I will gain anything by doing so since in XTU I don't look to be hitting positive temps in XTU so I doubt the package is getting that hot, not that 100MHz should make that much of a difference anyway...

Do it anyway,you might get suprized :D

 

My fear is that if the CPU really is this bad and that my oc issues aren't temp related then delidding is just going to be a risk of killing a CPU with no gain and that in turn makes it harder for me to sell later :(

all aircooled

 

6700K L525B711 VID 1.296v

boot at 5G 1.48v reject

 

6700K L525B504 VID 1.31v

boot at 5G not possible at 1.50v reject

 

2x 6700K L519C193 VID 1.37v

#1 boot at 5G 1.50v and 32M stable reject

#2 cannot boot 4.9G 1.50v reject

 

6700K L525B538 VID 1.37v

boot 5G at 1.45v, 0.02v higher 32M stable

LN2 -145C 1.50v 5.2G XTU

after delid

LN2 -145C 1.82v 6.0G XTU :)

my best chip so far, uncore goes also skyhigh

Edited by Achill3uS

  • Crew
My fear is that if the CPU really is this bad and that my oc issues aren't temp related then delidding is just going to be a risk of killing a CPU with no gain and that in turn makes it harder for me to sell later :(

 

 

No delid no glory man... it is the only way....

6700K L524B520 VID 1.264v

 

Maximus viii ranger & Corsair H110

 

4800 @ 1.295v CB15 & 1.34v XTU

5000 @ 1.44v HWBOT Prime & 32M stable

 

50001.44v32m.jpg

 

screen0392.jpg

Edited by Behzad Tak

Goodddd

6700K L519B892 VID 1.264v

 

HERO VIII

Voltages set in TurboV

Boot W7 5ghz 1.34V

Hwbot prime 5.1ghz 1.5v, CB15 5ghz 1.425V

 

Water temp 24C, EK block D5 360rad.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...