worse than 2, I think honestly 2 is the way to go

As i said some days ago....

 

Sent from my E2353 using Tapatalk

Very nice chip Rauf!

CPU was a bit strange though...first boot on LN2 it cold bugged at around -190. Then never again.

It was its virginity

 

Gj, nice find bro ^^

L604F282 6700K

1,4v hwbotprime 5ghz win7x64 air (27 degrees ambient), non delidded

Websmile strikes again no bad chip dares to enter his house

 

Sent from my SM-N910F using Tapatalk

Nice chip! How do you manage 27 ambient at this time of the year?

Sun is shining and test room is directly belowr the roof which is dark..

6700K B# L603F535

5Ghz @1.335V

ddr4 @2133 Mhz

 

http://valid.x86.fr/ldruns

Edited April 30, 20169 yr by Khabat_Karimi

wow, whats your cooling method?

Scores are low for them frequencies, even with mem at 2133, sure it is at 5Ghz ?

Edited May 4, 20169 yr by Leeghoofd

wow, whats your cooling method?

Hi

Cooler Master Seidon 120XL Water Cooler

Scores are low for them frequencies, even with mem at 2133, sure it is at 5Ghz ?

Hi

how about this one ?

Edited May 4, 20169 yr by Khabat_Karimi

better but still a long way from +/-1600 at 4500Mhz or +/-1750 at 5Ghz

Does anyone have a clue about this batch : x603c845 ?

I did not found nothing about it and i need to buy it .

x603c845 = 1.28v vid . 4900mhz with 1.45v stable h110 after delid.

need to check more with cooling.

I hope this can fit in this Thread

6700 B# L524B353

Not Delidded

Cooler : Custom Water (30 Celcius Ambient)

 

5120MHz Core & Cache @ 1.57v = http://valid.x86.fr/6k9hz3

GPUPI for CPU 1B @ 4.8GHz Core & Cache 1.45v (dont try lower voltage yet)

 

3DMark03 4.8GHz Core & Cache 1.425v (dont try lower voltage yet)

L610F173

Vid 1.296v

Maximus VIII Hero

Quick test XTU Stable 5.0Ghz 1,45v

Not delid

Old Phase Change, CPU idle temp 3ºc

 

Big Potato?

6700K - L605F111 (*4017)

 

Not delidded, tested on mOCF with AiO

 

5000/4500 boot Win7.64 = 1.36v

5000/4800 HWBotprime = 1.38v

4800/4500 CB15 = 1.280v

 

 

SS/LN2 Results soon i guess

Tried an X548 Vietnam chip last night with some weird behavior.

I took it apart again, reapplied TIM, and popped it back in. It started hanging on 55 every time, even with all completely stock.

Same happened here with my good 6300. Is that mean cpu dead?

Same happened here with my good 6300. Is that mean cpu dead?

 

CPU was fine. Board needed a rest!

CPU was fine. Board needed a rest!

Awesome! Did you reseat lid? Probably my cpu still ok too

 

This before delid

 

Edited July 19, 20168 yr by dumo

6700K - L605F111 (*4017)

 

Not delidded, tested on mOCF with AiO

 

5000/4500 boot Win7.64 = 1.36v

5000/4800 HWBotprime = 1.38v

4800/4500 CB15 = 1.280v

 

 

SS/LN2 Results soon i guess

 

Last night i did my first Steps with the Single Stage on a Skylake System.

CPU is now delidded, treated with Grizzly Kryonaut and not resealed.

 

2D

5300/4800 4/8 CB15 = 1.44v

Digg_de`s Cinebench - R15 score: 1181 cb with a Core i7 6700K

 

3D

5400/5200 2/2 3DM03 = 1.472v

Digg_de`s 3DMark03 score: 92813 marks with a GeForce GTX 460 (256bit)

:celebration:

Last night i did my first Steps with the Single Stage on a Skylake System.

CPU is now delidded, treated with Grizzly Kryonaut and not resealed.

 

2D

5300/4800 4/8 CB15 = 1.44v

Digg_de`s Cinebench - R15 score: 1181 cb with a Core i7 6700K

 

3D

5400/5200 2/2 3DM03 = 1.472v

Digg_de`s 3DMark03 score: 92813 marks with a GeForce GTX 460 (256bit)

:celebration:

 

Temperature max single stage cinebench r15 ?

Hmm when i remeber right it was around -35°c. Thats what the SS LCD shows. Ambient ~28°c

I think i can push the Cache at least 100-200MHz higher for cb15.. Did only some quick Tests.

When I use my SS or Cascade I put a temperature sensor next to the cpu.

I recommend doing that.