Administrators websmile Posted December 4, 2015 Administrators Share Posted December 4, 2015 This OS does not support ram disk size above 124mb when I install, very funny - thanks for headsup on the performace edition, might give it a try, I think I started form wrong direction when I made transition to 1151, should have started with full xp and then strip one by one instead of using old built. Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted December 4, 2015 Share Posted December 4, 2015 (edited) Too lite...http://www.hwlegend.com/bbforum/viewtopic.php?f=219&t=7907&sid=a05625555507f1aca49ffd3dda3420bc Follow this guide(mine) and keep the floppy support too(u can remove oobe) Sent from my E2353 using Tapatalk Edited December 4, 2015 by barbonenet Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted December 4, 2015 Share Posted December 4, 2015 Nice But download Tools not work. Quote Link to comment Share on other sites More sharing options...
GtiJason Posted December 7, 2015 Share Posted December 7, 2015 Nice But download Tools not work. I read it all , very nice. When I got to end download link not working. Not too sure what I would need anyways, unless eram stuff? Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted December 7, 2015 Share Posted December 7, 2015 Ehwhhe i removed my tools...maybe u need only wahaha(johnlam app) and eram driver cpl.... Sent from my E2353 using Tapatalk Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted December 8, 2015 Share Posted December 8, 2015 Yop, Just eram driver cpl please. Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted December 8, 2015 Administrators Share Posted December 8, 2015 http://forum.hwbot.org/showthread.php?t=138687 Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted December 9, 2015 Share Posted December 9, 2015 Thank I thought that of Barbonenet was different. Quote Link to comment Share on other sites More sharing options...
rtsurfer Posted December 12, 2015 Share Posted December 12, 2015 (edited) @coolice Small request, when you guys eventually update the BIOSes for non-K CPU BCLK unlocking, it would be nice if we can have more DRAM voltage than 2.00V. I have only checked the Impact though, dunno about other boards. Edited December 12, 2015 by rtsurfer Quote Link to comment Share on other sites More sharing options...
Alex@ro Posted December 12, 2015 Share Posted December 12, 2015 Enable ln2 mode for up to 2.135v.... Sent from my SM-N910F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Johan45 Posted December 27, 2015 Share Posted December 27, 2015 Hoping for a bit of insight. I've tried many times now and when it's trying to copy the drivers I selected to insert from USB I keep getting an error saying it can not copy them. Any ideas? Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted December 27, 2015 Administrators Share Posted December 27, 2015 (edited) Possible reasons for a fail can be floppy support missing on your XP Iso, corrupted files, wrong files (64 instead of 32bit for example when you try to work with 32bit xp)and iirc I had this one or two times when I selected usb uefi as first boot and not usb stick "normal". Very hard to judge for me from distance, if you have correct working files and install named XP.iso it is all I can think of at the moment P.S. please also check your BIOS version if it is XP capable Edited December 27, 2015 by websmile Quote Link to comment Share on other sites More sharing options...
Johan45 Posted December 27, 2015 Share Posted December 27, 2015 (edited) Thanks Websmile, Correct files and BIOS AFIK came from massmans list for the Hero. Have tried different USB slots and booted in normal. Scratching my head right now. I'm going to put a different image on the USB and give it another go. EDIT: Must have been a bad image? It's working now thanks Edited December 27, 2015 by Johan45 Quote Link to comment Share on other sites More sharing options...
coolice Posted December 28, 2015 Author Share Posted December 28, 2015 added XP BIOS for non-k OC Quote Link to comment Share on other sites More sharing options...
Achill3uS Posted December 28, 2015 Share Posted December 28, 2015 thanks TL been waiting for this one Quote Link to comment Share on other sites More sharing options...
KaRtA Posted December 30, 2015 Share Posted December 30, 2015 Hey TL, does the firmware on the first page for the OC Panel work on the OC Panel 1? Want to flash it, don't want to brick it. Quote Link to comment Share on other sites More sharing options...
Strong Island Posted January 8, 2016 Share Posted January 8, 2016 Hey TL, does the firmware on the first page for the OC Panel work on the OC Panel 1? Want to flash it, don't want to brick it. I have been using mine without even flashing, of course some options I don't use and cache ratio isn't there but everything else works fine, but I think they did add firmware on first page for oc panel 1 Quote Link to comment Share on other sites More sharing options...
Gunslinger Posted January 8, 2016 Share Posted January 8, 2016 I have been using mine without even flashing, of course some options I don't use and cache ratio isn't there but everything else works fine, but I think they did add firmware on first page for oc panel 1 I bricked 2 of them trying to update, finally just gave up and stuck with the original RVE FW Quote Link to comment Share on other sites More sharing options...
KaRtA Posted January 8, 2016 Share Posted January 8, 2016 I have been using mine without even flashing, of course some options I don't use and cache ratio isn't there but everything else works fine, but I think they did add firmware on first page for oc panel 1 I have done the same, can pause and slow mode fine. Nothing else of course. When it's plugged in though, appear TurboV doesn't work, but I might not have Connect installed. I don't want to brick it like Gunslinger. Been with me from RIVBE to Z97. Want to have it a bit longer....lol Quote Link to comment Share on other sites More sharing options...
Strong Island Posted January 9, 2016 Share Posted January 9, 2016 (edited) I have done the same, can pause and slow mode fine. Nothing else of course. When it's plugged in though, appear TurboV doesn't work, but I might not have Connect installed. I don't want to brick it like Gunslinger. Been with me from RIVBE to Z97. Want to have it a bit longer....lol Actually for me a lot of things have worked. So far I have tried bclk, cpu ratio and cpu vcore, and the slow mode and retry all works plus the start button. I haven't tried anything else so I can't confirm, I think it had rve firmware on it also yes my turbov works at same time. The only reason I even tried is because the one that came with my m8e was working funny at first but for some reason seems to work fine now, so I used my old one for awhile Edited January 9, 2016 by Strong Island Quote Link to comment Share on other sites More sharing options...
coolhand411 Posted January 9, 2016 Share Posted January 9, 2016 (edited) I have bricked my first OC panel and order another ,you need to update the firmware via previous gen. platform wish someone can post all the procedures/apps here the biggest problem is luck of OC panel 2,there should be an option to buy OC Panel with all ROG boards ,come on guys ! EDit; or at list make them available Edited January 9, 2016 by coolhand411 Quote Link to comment Share on other sites More sharing options...
KaRtA Posted January 10, 2016 Share Posted January 10, 2016 So flashing from a Z170 board is a no go, you need a Z97 handy.....hmmmm Quote Link to comment Share on other sites More sharing options...
coolice Posted January 11, 2016 Author Share Posted January 11, 2016 I bricked 2 of them trying to update, finally just gave up and stuck with the original RVE FW I have bricked my first OC panel and order another ,you need to update the firmware via previous gen. platform wish someone can post all the procedures/apps here the biggest problem is luck of OC panel 2,there should be an option to buy OC Panel with all ROG boards ,come on guys ! EDit; or at list make them available May i know both of your ROG OC Panel Firmware Tool version and OS? Quote Link to comment Share on other sites More sharing options...
coolice Posted January 11, 2016 Author Share Posted January 11, 2016 added new BIOS for Extreme, Formula and Hero, the rest on its way Improves DRAM OC (includes AFR and B-die presets) Added Execute Disable Bit Option Support both normal K OC and non-K OC (above 103) Quote Link to comment Share on other sites More sharing options...
rtsurfer Posted January 11, 2016 Share Posted January 11, 2016 Do Impact first. Plz.. Sent from my A0001 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.