October 11, 20159 yr Administrators Maybe main difference is trcd/rtp, if mems are on the edge of limits you can sometimes (and need to do) force them to pass tests at limit regions.
October 11, 20159 yr My bets are that I own a reject - I've tried "persuading" it with voltage, but it won't budge The other stick does much better with tRCD+tRP. Can't afford binning these, so it is what it is. Edited October 11, 20159 yr by aerotracks
October 14, 20159 yr Looking good guys keep the results coming,been little quite myself with memory but I'll try contribute a little myself soon
October 14, 20159 yr Got myself an oc forumla now as well. What bios do you recommend? Seems some biosrs are missing from the bios list thread... Latest official is 1.50, but it seems people are using 1.44 something.
October 14, 20159 yr More air tuning on xtu and Asrock Z170 OCF,Kingston AFR 1.63v air....Should see nice boost on LN2 Know what 2nds/3rds you were running with that?
October 14, 20159 yr Know what 2nds/3rds you were running with that? Ahhhh where's the fun in that? The fun is figuring them out yourself
October 14, 20159 yr Administrators Looking good guys keep the results coming,been little quite myself with memory but I'll try contribute a little myself soon Sorry, moved to Asus - my OCF rots at the closet - maybe later in case I decide to end my break @Doug I used 1,43V, seemed to be solid
October 14, 20159 yr Administrators Yes, BIOS, Pieter updated Z170 stats and BIOS section and included 1,44C as latest, maybe you can give this a try as well
October 14, 20159 yr Got myself an oc forumla now as well. What bios do you recommend? Seems some biosrs are missing from the bios list thread...Latest official is 1.50, but it seems people are using 1.44 something. Nick updates bios quite regularly on XS OCf thread,I think the 144c is the one he posted recently, is great choice to start with.I haven't used it my self because im little slack but yeah that one be fine,board is great to use just use one of nick profile to get you started,xtu,32m and memory profiles @Doug2507 just start of with Nicks memory profile in bios that splave and loud would of also tested before release of the board,they are great to get you started
October 14, 20159 yr May as well chime in as i'll be 'rocking' it tomorrow. (taxi.. ) 3600c11, 4 sticks. Still need to sort RTL/IOL's. RTL/IOL done. (near enough). Time for a play with all the funky timings. Edited October 14, 20159 yr by Doug2507
October 17, 20159 yr Took the board for a ride with trident-z E-die,achieved: DDR4-4000 15-20-20-28-1T 1.65V DDR4-4000 14-20-20-28-1T 1.65V(weird C14 and C15 same volts also no perf increase) DDR4-4000 13-20-20-28-1T 1.75V DDr4-4000 12-20-20-28-1T 1.95V
October 17, 20159 yr On Skylake 32M times can vary by more than 5 seconds without you touching any of the settings. So I wouldn't refer to 32M times as a sort of reliable performance comparison. (weird C14 and C15 same volts also no perf increase)Have you tried raising tRCD/tRP to 21 or 22?From my experience on E-die, tRCD and tRP responds to voltage far more than what we've seen on any generation of Samsung, DDR3 or DDR4. Edited October 17, 20159 yr by TaPaKaH
October 17, 20159 yr CL12 slower than CL13/14, is it due to looser seconds/thirds? No,second/thirds same.This were just test runs,aiming for stability testing,for a proper testing xp with waza is required,altough variation is there too...
October 17, 20159 yr On Skylake 32M times can vary by more than 5 seconds without you touching any of the settings. So I wouldn't refer to 32M times as a sort of reliable performance comparison.Have you tried raising tRCD/tRP to 21 or 22?From my experience on E-die, tRCD and tRP responds to voltage far more than what we've seen on any generation of Samsung, DDR3 or DDR4. I tried the lowest value for performance purposes,i noticed the same thing too tough,going looser would imply lower voltage
October 17, 20159 yr @Alex@ro are those gskill E-die memory's scalling pass 1.95v? Was 1.95v it or will they keep scalling to 2.1v ? You dont need to try and kill them for me ahah just want to know if 1.95v was it
October 17, 20159 yr Yes,1.95 on MM,will trynhigher for sure pnce i have backup kit MM...? is that short for MaxxMem
October 18, 20159 yr Seems like nice kit,been trying to work out what sammy-e kit to buy with so many kits comming available,be interesting to see some Kingston kits too,they are doing sammy-e aswell ?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.