Administrators websmile Posted December 31, 2015 Administrators Posted December 31, 2015 Still same issue Nick showed three months ago? Looks as if this is only cosmetic annoyance though, time is fast enough Quote
Doug2507 Posted January 4, 2016 Posted January 4, 2016 (edited) Stroll on Mocf. Big one craps out 3866 1t below 13-13. Guess that'll have to do for binning till it's smaller sibling arrives! Struggling to boot 4k 2t though, wondering if it's weak IMC...... Edited January 4, 2016 by Doug2507 Quote
Random Posted January 4, 2016 Posted January 4, 2016 (edited) 4k is hard on OCF you gotta hold down the power button ALOT like after you change bios setting and save it wont restart. if you hit restart instead of shutdown in windows it needs powered off with button. just in case you run into anything related to this Edited January 4, 2016 by Random Quote
Doug2507 Posted January 4, 2016 Posted January 4, 2016 Sounds very familiar! Lot of 19 00 cycling with a few 32's thrown in. I'll push for 12 12 then either way start binning sticks.... Quote
Random Posted January 4, 2016 Posted January 4, 2016 yeah that sounds about right. just wait for it to go off than hit power button should help. Quote
Strong Island Posted January 4, 2016 Posted January 4, 2016 sorry to hijack thread but can anyone link me a b-die kit that you guys have been buying. Does 2 8gb sticks have the same efficiency as 4 4gb sticks on some of the crappy other boards, haha. Really wish I would have kept my ocf. Quote
GtiJason Posted January 5, 2016 Posted January 5, 2016 sorry to hijack thread but can anyone link me a b-die kit that you guys have been buying. Does 2 8gb sticks have the same efficiency as 4 4gb sticks on some of the crappy other boards, haha. Really wish I would have kept my ocf. Here“s mine....in stock http://www.newegg.com/Product/Product.aspx?Item=N82E16820232195&cm_re=ripjaws_v-_-20-232-195-_-Product back in sock jan.7 http://www.newegg.com/Product/Product.aspx?Item=N82E16820232194&cm_re=tridentz-_-20-232-194-_-Product Quote
Splave Posted January 5, 2016 Posted January 5, 2016 You will need to buy allot to do 4000 c12. 1 out of 20 here Quote
Guest barbonenet Posted January 5, 2016 Posted January 5, 2016 I got mine just now...i hope they are sammyB, gskill tridentz 16gb 2x8 16-16-16 1.35v Sent from my E2353 using Tapatalk Quote
rtsurfer Posted January 5, 2016 Posted January 5, 2016 You will need to buy allot to do 4000 c12. 1 out of 20 here Or maybe this will be one of those times where the high-speed bins will be worth it..? Unlike E-die. Quote
Strong Island Posted January 5, 2016 Posted January 5, 2016 You will need to buy allot to do 4000 c12. 1 out of 20 here ya I'm broke, might be better off just grabbing some more cheap afr and pushing on cold. I would only have enough for 4 sticks, and I'm guessing I would need 4 for proper efficiency on asus unless double sided equals 4 dimm efficiency. Still new to memory clocking, man it's a whole nother world. Have a lot to learn. Quote
phobosq Posted January 5, 2016 Posted January 5, 2016 And my Z170 OCF went for RMA, it didn't want to boot anymore, just instant PSU shutdown. Exactly now, when I'm getting some G.Skill E-die which are already checked for 1800+ 12-18. Quote
dhaine Posted January 5, 2016 Posted January 5, 2016 Hello everyone, What do you suggest running for 24/7 general/gaming build as for max DRAM voltage and most efficient frequency/timings ? I see that everyone is running for the highest benchs score / optimization and it's great, but why not also going for the highest score safe dram with 24/7 ? Or are you really running ram at 1.8+ all the time ? Is there no risk of breaking it ? Thanks for answers ! Quote
Administrators websmile Posted January 5, 2016 Administrators Posted January 5, 2016 I like 3600 C13-18 tight subs or 3733C15-18 tight, both works with good mems at below 1,6v normally if you have decent imc and board and is still in a good voltage/performance ratio Quote
Doug2507 Posted January 6, 2016 Posted January 6, 2016 All B-Die atm will need 2t on the OCF after 3600 ish 3840 here (12 12 28 1 220) but not sure if 32m stable. Certainly the limit for me right now on OCF, 3866 same timings not even into windows, but that's on a 6320. Not many sticks liking 4k either. (Tridentz). Few rjs arriving today so I'll get em all binned and post results. Quote
l0ud_sil3nc3 Posted January 7, 2016 Posted January 7, 2016 (edited) Enjoy the new bios, this bios has a few things fixed along with non K sku support. http://www.xtremesystems.org/forums/showthread.php?292331-***Official-ASRock-z170-OC-Formula-Finger-Pop-OC-Bonanza-UKNOWDAT-Edition-FTW-ETC***&p=5268603&viewfull=1#post5268603 Edited January 7, 2016 by l0ud_sil3nc3 Quote
Guest Bullant Posted January 8, 2016 Posted January 8, 2016 (edited) Some retail B-die on air,quick 4Ghz,will fine tune a little see what more I can get Edited January 8, 2016 by Bullant Quote
GtiJason Posted January 8, 2016 Posted January 8, 2016 Some retail B-die on air,quick 4Ghz,will fine tune a little see what more I can get Bull, you got an "M" I see. Excited to get one myself but big board has been good to me. No problems booting in at 3900+ w cr1, but haven't found the right baseclock/mem freq. faster than 4000c12 2t. At lower speeds the difference is around 0.53 sec so must be right at a half second if I could complete a run at 4000 1T (struggle to break double digits). Must of got lucky with my B die as I've completed 32m 4kc12 with 1.785v already. Only had em 2 days, but haven't left the house much Quote
Rauf Posted January 8, 2016 Posted January 8, 2016 What volts do these b-die like? Still not available here, but soon got some coming. Quote
Doug2507 Posted January 8, 2016 Posted January 8, 2016 (edited) Up to around 1.8v Rauf. I got scaling on freq after that but not lower timings. Although I've heard ocf won't do below 12 12 (?) So maybe why. 12 11 boot to win no problem but couldn't bench. Jase, was that with new bios? Not had time to play with it yet, hopefully get some time to sit down with it today. 3953 12 12 12 28 220 1t was highest xtu stable I could get on 1.92. I'll be running 32m 1.93 next for binning. Got 8 sticks of each (trident/rj) to bin. Will post findings. Edited January 8, 2016 by Doug2507 Quote
Guest Bullant Posted January 8, 2016 Posted January 8, 2016 Ran a quick 5ghz with same retail b-die air...around the 1.8v,only have thes one kit of 3600 cl7,will fine tune little later see if anymore before trying on cold Quote
rtsurfer Posted January 8, 2016 Posted January 8, 2016 Up to around 1.8v Rauf. I got scaling on freq after that but not lower timings. Although I've heard ocf won't do below 12 12 (?) So maybe why. 12 11 boot to win no problem but couldn't bench. Jase, was that with new bios? Not had time to play with it yet, hopefully get some time to sit down with it today. 3953 12 12 12 28 220 1t was highest xtu stable I could get on 1.92. I'll be running 32m 1.93 next for binning. Got 8 sticks of each (trident/rj) to bin. Will post findings. Pretty interesting that you topped out at 3953Mhz, because that's the exact same freq at which my Impact gave in today. Bios limits prolly. [emoji25] Looking great Bullant, I see the Haswell 5G time falling soon. [emoji6] Quote
Guest Bullant Posted January 8, 2016 Posted January 8, 2016 Pretty interesting that you topped out at 3953Mhz, because that's the exact same freq at which my Impact gave in today. Bios limits prolly. [emoji25] Looking great Bullant, I see the Haswell 5G time falling soon. [emoji6] Thanks man,ill push them little harder soon see if 4000 is possible for this kit on air,still have few more subs to adjust that should help little more at 3866,guess need to buy few more of these kits Im sure the 5ghz will fall soon... not sure if these mems will do it but doesn't hurt to try ahahah Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.