February 19, 20169 yr Does anyone have a CS BIOS for the Gigabyte 580 SOC? I thought it was in the list, not only ref Thanks!
February 27, 20169 yr i just found a shammy280gtx coldslowbios i saved a long time ago. had a quick look in nibitor and seems ok with 2d+3d volts on full 1,1875volt from asus. be careful never flashed this bios myself.
April 13, 20169 yr The gtx 570 ref coldslow bios is that also for the gtx 570 twin frozer power edition ? Or do I need another one ?
August 5, 20168 yr Please add Titan x pascal hahahahaha Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk
August 5, 20168 yr Does anyone have a cold slow bios for gtx470 SOC and gtx570 SOC? Use the x80 SOC BIOS Did you get around the OCP for the GDDR on the '470?
August 5, 20168 yr Use the x80 SOC BIOS Did you get around the OCP for the GDDR on the '470? thanks! ofcourse:D because she used ncp 5395 pwm , but the main problem isn´t OCP , it will be OVP! my card use hynix , they scale with volts , for 1100mhz , need atleast 1.68 -1.7v...it will be a problem! for the gpu i configure the vid mod for ADP4100 ...that should off de OVP , also think that will need hard mod for CBB aswell!!
August 5, 20168 yr I definitely had OCP problems. I had shutdown via GDDR MHz. I *think* I did the IMAX mod and it wasn't reacting the way I wanted....but it was years ago. I have a long-ass list of things needing probed and soldered, I will look at it again eventually I don't remember having any vCore problems on either card, nor CBB once modded. Thankfully, the 470 and 480 SOC do not behave like '460 SOC. Benching a '460 SOC well should result in a certificate. All new LN2 benchers should try one, good experience for the future
August 5, 20168 yr ocp is simply just lowering in half the ressistance between ILIM and gnd! , but like i said OCP mod will leave only 50-80mv before OVP will trigger , i know these on semi pwm like my pants! , only way is VID mod ... i bench 460 soc 9 moths ago ...what i can said is i won´t bench that card anymore nachtfalke`s Unigine Heaven - Xtreme Preset score: 1378.66 DX11 Marks with a GeForce GTX 460 (256bit) Edited August 5, 20168 yr by nachtfalke
December 3, 20168 yr Hi , i hint deep cold slow with my gtx560Ti twin frozr II/OC at ~-80*C , bios flash are this from first page , but still CS issue. card pcb is same like gtx460hawk , but without dip switch mounted , i made manualy strap to "xtreme cool" , card ran perfectly at -68 on my phase and hint 1380 mhz gpu freq , but i can´t bench this card on my cascade ~ -115*C . know anyone to pass over -80 CS on these card? Edited December 3, 20168 yr by nachtfalke
April 2, 20178 yr Request mod bios Gigabyte Gtx 570 windforce3. I disabled the ocp in the controller, as written on the datasheet soldering the pins 10 and 11, but continues to restrict the card to 1.13v and 980mhz gpucore. Going beyond the card returns black screen under load and vgpu go back to 0.950v (2d mode) This is ocp mod Stock bios GF110
May 4, 20178 yr G92 55nm it has CB and G92 65nm it has cold slow! is a bit difference ...G94 chip same, we find on 9600gt both 55 and 65nm depends of card!
January 25, 20187 yr Anyone has that MadMatrix app? Link in the madshrimps article is dead. Here you go. https://www.dropbox.com/sh/pn5ylvyheh19ffm/AABDuH8ORgvBnD4bu3L0AkOaa?dl=0
October 6, 20204 yr any possibility to mod nvidia bios to resolve cold slow or that need to do someone from vendors?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.