rockeur.alexis Posted February 7, 2016 Share Posted February 7, 2016 Thank you Quote Link to comment Share on other sites More sharing options...
K404 Posted February 19, 2016 Share Posted February 19, 2016 Does anyone have a CS BIOS for the Gigabyte 580 SOC? I thought it was in the list, not only ref Thanks! Quote Link to comment Share on other sites More sharing options...
basco Posted February 27, 2016 Share Posted February 27, 2016 i just found a shammy280gtx coldslowbios i saved a long time ago. had a quick look in nibitor and seems ok with 2d+3d volts on full 1,1875volt from asus. be careful never flashed this bios myself. Quote Link to comment Share on other sites More sharing options...
vip3r011 Posted April 2, 2016 Share Posted April 2, 2016 thanx was looking for a gtx280bios , gona test on xfx with accelero xtreme Quote Link to comment Share on other sites More sharing options...
5erveD Posted April 13, 2016 Share Posted April 13, 2016 The gtx 570 ref coldslow bios is that also for the gtx 570 twin frozer power edition ? Or do I need another one ? Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted August 5, 2016 Share Posted August 5, 2016 Does anyone have a cold slow bios for gtx470 SOC and gtx570 SOC? Quote Link to comment Share on other sites More sharing options...
Dancop Posted August 5, 2016 Share Posted August 5, 2016 Please add Titan x pascal hahahahaha Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk Quote Link to comment Share on other sites More sharing options...
K404 Posted August 5, 2016 Share Posted August 5, 2016 Does anyone have a cold slow bios for gtx470 SOC and gtx570 SOC? Use the x80 SOC BIOS Did you get around the OCP for the GDDR on the '470? Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted August 5, 2016 Share Posted August 5, 2016 Use the x80 SOC BIOS Did you get around the OCP for the GDDR on the '470? thanks! ofcourse:D because she used ncp 5395 pwm , but the main problem isn´t OCP , it will be OVP! my card use hynix , they scale with volts , for 1100mhz , need atleast 1.68 -1.7v...it will be a problem! for the gpu i configure the vid mod for ADP4100 ...that should off de OVP , also think that will need hard mod for CBB aswell!! Quote Link to comment Share on other sites More sharing options...
K404 Posted August 5, 2016 Share Posted August 5, 2016 I definitely had OCP problems. I had shutdown via GDDR MHz. I *think* I did the IMAX mod and it wasn't reacting the way I wanted....but it was years ago. I have a long-ass list of things needing probed and soldered, I will look at it again eventually I don't remember having any vCore problems on either card, nor CBB once modded. Thankfully, the 470 and 480 SOC do not behave like '460 SOC. Benching a '460 SOC well should result in a certificate. All new LN2 benchers should try one, good experience for the future Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted August 5, 2016 Share Posted August 5, 2016 (edited) ocp is simply just lowering in half the ressistance between ILIM and gnd! , but like i said OCP mod will leave only 50-80mv before OVP will trigger , i know these on semi pwm like my pants! , only way is VID mod ... i bench 460 soc 9 moths ago ...what i can said is i won´t bench that card anymore nachtfalke`s Unigine Heaven - Xtreme Preset score: 1378.66 DX11 Marks with a GeForce GTX 460 (256bit) Edited August 5, 2016 by nachtfalke Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted December 3, 2016 Share Posted December 3, 2016 (edited) Hi , i hint deep cold slow with my gtx560Ti twin frozr II/OC at ~-80*C , bios flash are this from first page , but still CS issue. card pcb is same like gtx460hawk , but without dip switch mounted , i made manualy strap to "xtreme cool" , card ran perfectly at -68 on my phase and hint 1380 mhz gpu freq , but i can´t bench this card on my cascade ~ -115*C . know anyone to pass over -80 CS on these card? Edited December 3, 2016 by nachtfalke Quote Link to comment Share on other sites More sharing options...
Guest luigimedda22 Posted April 2, 2017 Share Posted April 2, 2017 Request mod bios Gigabyte Gtx 570 windforce3. I disabled the ocp in the controller, as written on the datasheet soldering the pins 10 and 11, but continues to restrict the card to 1.13v and 980mhz gpucore. Going beyond the card returns black screen under load and vgpu go back to 0.950v (2d mode) This is ocp mod Stock bios GF110 Quote Link to comment Share on other sites More sharing options...
Achill3uS Posted May 3, 2017 Share Posted May 3, 2017 hey, does anyone have ASUS GTX 570 Direct CU II coldslow bios? Quote Link to comment Share on other sites More sharing options...
Splave Posted May 3, 2017 Share Posted May 3, 2017 anyone have for 9600 GT Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted May 4, 2017 Share Posted May 4, 2017 I think the greek guys are the only ones who've been able to figure out 9xxx cards. Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted May 4, 2017 Share Posted May 4, 2017 G92 55nm it has CB and G92 65nm it has cold slow! is a bit difference ...G94 chip same, we find on 9600gt both 55 and 65nm depends of card! Quote Link to comment Share on other sites More sharing options...
Bruno Posted July 10, 2017 Share Posted July 10, 2017 Anyone has that MadMatrix app? Link in the madshrimps article is dead. Quote Link to comment Share on other sites More sharing options...
xMec Posted January 21, 2018 Share Posted January 21, 2018 Cold Slow Bios for 560 ti Gigabyte GV-N560OC-1GI ??? Quote Link to comment Share on other sites More sharing options...
SniperOZ Posted January 25, 2018 Share Posted January 25, 2018 Anyone has that MadMatrix app? Link in the madshrimps article is dead. Here you go. https://www.dropbox.com/sh/pn5ylvyheh19ffm/AABDuH8ORgvBnD4bu3L0AkOaa?dl=0 Quote Link to comment Share on other sites More sharing options...
shar00750 Posted February 3, 2018 Share Posted February 3, 2018 need halp with 560ti directcu, have cb at -65 Quote Link to comment Share on other sites More sharing options...
Bulshooter Posted May 12, 2018 Share Posted May 12, 2018 Hi, i search fpr cold slow Bios for a MSI GTX 260 Lightning Black Edition 1792 MB Quote Link to comment Share on other sites More sharing options...
xMec Posted May 13, 2018 Share Posted May 13, 2018 Any cold slow bios for GTX 580 Reference 3GB Version?? Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted October 6, 2020 Share Posted October 6, 2020 any possibility to mod nvidia bios to resolve cold slow or that need to do someone from vendors? Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted October 7, 2020 Share Posted October 7, 2020 Thx but I mean for old card like gtx 570 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.