Massman Posted July 8, 2013 Posted July 8, 2013 Okay, I'm curious now. What are the fastest MFR based SuperPI 32M runs out there? Quote
Alex@ro Posted July 8, 2013 Posted July 8, 2013 Not sure what you mean,highest MHZ or highest efficiency?Cause single-sided memory scores so low it's not worth the effort.8 GB double-sided MFR high-binned should be interesting to see how they perform... Quote
Massman Posted July 8, 2013 Author Posted July 8, 2013 Full out => best score 4G / 5G => best score, therefore best efficiency I'm curious about these SuperPI 32M runs because there seems to be a battle going on for the best MFR based SuperPI 32M runs. Quote
l0ud_sil3nc3 Posted July 8, 2013 Posted July 8, 2013 Dumo is got MFR pretty dialed at 5Ghz, I want to say he was at 6:06:xx or lower off the top of my head. Quote
Crew Don_Dan Posted July 8, 2013 Crew Posted July 8, 2013 5 GHz by l0ud_sil3nc3: 4 GHz by Splave: Those are the only runs with MFR in the XS 4 and 5 GHz 32M Low-Clock-Challenge. Quote
Hiwa Posted July 8, 2013 Posted July 8, 2013 tried it but never 4g and 5g also nick tried some C8 i think Quote
Alex@ro Posted July 8, 2013 Posted July 8, 2013 Waste of time,nothing can match ln2 cooled 2600+ C6 psc and bbse.Maybe samsung 3000 9-12-12 in theory because practically highest benchable freq i saw was splave 2933 1 Quote
sin0822 Posted July 8, 2013 Posted July 8, 2013 (edited) Full out => best score4G / 5G => best score, therefore best efficiency I'm curious about these SuperPI 32M runs because there seems to be a battle going on for the best MFR based SuperPI 32M runs. i think its more just superpi to test out staiblity of MFR overclocks, lol I could be wrong tho Edited July 8, 2013 by sin0822 Quote
Massman Posted July 9, 2013 Author Posted July 9, 2013 Thanks for the info. So about 15 seconds slower at 5GHz. Well, that settles it then. I'm not going to be running any MFR for SPI performance runs Quote
der8auer Posted July 9, 2013 Posted July 9, 2013 MFR is the AMD of the memory sticks. High clock - no performance. 1 Quote
TaPaKaH Posted July 9, 2013 Posted July 9, 2013 (edited) posted this morning by Dumo, and this even has nV control panel in the tray Edited July 9, 2013 by TaPaKaH 1 Quote
Crew Don_Dan Posted July 9, 2013 Crew Posted July 9, 2013 Thanks for the info. So about 15 seconds slower at 5GHz. Nah, it's more around 5 - 10 seconds I guess. L0ud_sil3nc3's run was done on B0 CPU and with lower NB, fully tweaked on C0 with NB 1:1 should be noticeably faster. Another 5 GHz run by Dumo: I'd like to see a fully tweaked 1600MHz CL8 run, should be quite interesting. Quote
hokiealumnus Posted July 9, 2013 Posted July 9, 2013 MFR is the AMD of the memory sticks. High clock - no performance. Bingo. Typing up a review on the 2933 G.Skill kit. Results are disappointing. They are designed for high frequency and nothing else. They fail to do the one thing a more expensive, higher-rated kit should do - increase performance. However, for people that enjoy memory clocking, they're a heck of a lot of fun. So it depends on your goal. If you want better benchmark times, look elsewhere. If you want zomg memory frequency, go MFR. Quote
Massman Posted July 9, 2013 Author Posted July 9, 2013 Price performance figures must be aweful. For some high-clock 4x4GB high density kits you're paying well over €1000, with not a single bit more performance. In fact, more money brings lower performance. I have a strong urge to fill the "rant about reviews"-thread with a list of all sites that recommend these MFR based memory kits Quote
TaPaKaH Posted July 9, 2013 Posted July 9, 2013 If you compare them to single-sided Samsung or double-reject CFR for daily use, MFR is not too bad actually Quote
K404 Posted July 9, 2013 Posted July 9, 2013 If I was running a GPU setup with 12GB+ of graphics RAM, 4x4GB or more of capable system RAM has a place.....but ermagherd.... not at 1000 euros. Not even $1000. What about people NOT running their memory under LN2? How do xFR sticks shape up against PSC & BBSE? The story changes, right? Quote
Splave Posted July 9, 2013 Posted July 9, 2013 MFR is the AMD of the memory sticks. High clock - no performance. and siggggged Will try 4x4 soon Quote
Alex@ro Posted July 9, 2013 Posted July 9, 2013 any of you benched 8 gb mfr modules?Granted they won;t reach single-sided speeds,but there must be some good modules in the wild ... ? Quote
xxbassplayerxx Posted July 9, 2013 Posted July 9, 2013 any of you benched 8 gb mfr modules?Granted they won;t reach single-sided speeds,but there must be some good modules in the wild ...? I've been wondering the same thing myself... Are these all of these MFR chips going so far because they're only single-sided? Quote
dumo Posted July 9, 2013 Posted July 9, 2013 The ones to look for are mfr pbc 22x~25x single sided which mostly can boot @ 1.85V+ Quote
hokiealumnus Posted July 10, 2013 Posted July 10, 2013 Here you go guys: http://www.overclockers.com/gskill-tridentx-ddr3-2933-memory-kit-review . Oh, and Massman, it received the 'no award' award. Quote
Massman Posted July 10, 2013 Author Posted July 10, 2013 Read it already! The conclusion sums it all up quite accurately. For pure MHz it's a go-go, but if you want performance, you can go 40% cheaper with better performance. Nicely done! :celebration: Quote
l0ud_sil3nc3 Posted July 10, 2013 Posted July 10, 2013 I feel like I just won the special Olympics of 32m benching:p: 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.