General hardware discussion

Got a new AMD Ryzen 4900HS and could not submit any benchmarks for it. It is apparently not a recognized proc.

bonjour , petit test ati 2X Sapphire NITRO+ Radeon RX 5700 XT Special Edition MA CONFIG I9 9900K ASUS MAXIMUS Z 390 APEX DDR 4 4000MHZ + 2X NITRO+ Radeon RX 5700 XT Special Edition AUCUN BENCHS PASSE EN CROSSFIRE 5700 XT , INADMISSIBLE ? EX ? BENCH 3DMARK FIRE STRIKE 1X 5700 xt SCORE 23000 2x 5700 xt SCORE 23000 Hello , review 2 x ati Sapphire NITRO + Radeon RX 5700 XT Special Edition My CONFIG I9 9900K ASUS MAXIMUS Z 390 APEX DDR 4 4000MHZ + 2X NITRO + Radeon RX 5700 XT Special Edition NO BENCHS PASS IN CROSSFIRE 5700 XT, INADMISSIBLE ? EX? BENCH 3DMARK FIRE STRIKE 1X 5700 xt SCORE 23…

- I7 6950x - Msi x99 GodLike - Asus Gtx 1080 Strix O8G (x2) - Hx1200i - Lian Li O11 Dynamic XL - Waterblock Ek for 1080 - EK Water Blocks EK-Quantum Kinetic TBE 300 D5 PWM - EK Water Blocks EK-CoolStream Classic PE 360 (x2) - Asus MG279 - Asus MG278 - I7 8086k (5.5ghz 1.55v) - Asus x370 Apex - G.Skill 4133mhz cl17

Is there anything wrong with my processor gpu-z shows -1 for the default clock. Is this just a bug. processor is ryzen 5 2400g and motherboard is asus x570 tuf gaming - plus.

I'm testing a 4800C18 kit on M11A and 9900k. The CPU can do 4200 12.11 (ram limit), and can boot single channel for validation 4900 in hot summer, 5000 with 20C room temp, so i assume it's a decent IMC. Problem with the 4800 kit is that i can't boot XMP. I tried bios 1005 and bios 033. Tried both xmp profiles, with auto and manual volatages (1.45/1.6 io/sa). Tried frequency range from 4600 to 4800. I dont't think my IMC is that week that cannot do 4600c18. I feel like i'm missing something, like i forgot a shitty setting... Tried trace centering on/off but did not had any impact. With MHC Full check enabled i get stuck at b1 and with it disabled i…

Friends, Has anyone else seen this: https://www.quantacool.com/polarbox-cpu-cooler Please comment - but no pumps? No water? No problem? Polarbox? I watched the video and am having a hard time believing this actually works but I probably didn't pay enough attention in science class. Loved to hear from more knowledgeable members.

I currently have my Core I5 9600K on a Cooler Master MasterLiquid ML120L RGB water cooler Unfortunately my main board is not acknowledging my pci - e slots or video card

I just got one of these about a week ago and have had a few moments to play with it. It seems like a very capable board but it's extremely particular. Fortunately, Shamino put together an awesome guide for it back when he was at EVGA. However, he hosted quite a few of the images on a site that has since shut down. http://kingpincooling.com/forum/showthread.php?t=361 Is there any chance that someone saved the guide before it went down? I tried to use internet archive/wayback machine and things like that but they don't archive images.

grüße..was ist da an übertakten machbar?mfg

First post here As the title says, right now I’m on X79 (3930k, 4.95@1.47v Air) for my OC rig, and I’m looking for something to upgrade to.The things is, it needs to OC pretty well on ambient, so 3rd gen Ryzen is mostly out the window. It’s just for overclocking and such. Possible subzero in further future.Lastly, I would like to stay below 1000€/1000$ for the whole setup (cpu, mobo, ram). Don’t care if it’s used, as long as it works. Also found a 7980xe for 560€ and x299 Dark for 250€ on my “local” used market. Not sure if It’s a good deal as I’m “new” to modern HEDT.

Hello to all. At the request of @ground1556 I open the discussion regarding an extraordinary lga771 motherboard. for now I don't know if the card that brought me Onisa is special or we were lucky to have a particular HW combination. 1. Card used for CC has no modification 2.Only with one type of ram rises so much in frequency 3.Cpucool allows you to go up more from windows than setfsb. 4. Card reaches 515mhz with air on NB. 5.I had to use socket 2 because socket 1 is not working for the moment. CPU remains cold. I have not deepened. 6.Bank RAM used with the cascade reaches 490mhz of air validated, the best bank reaches 503 on air and not checked with extre…

Anyone know anything about this guy or whatever happened with his idea?

So i've heard of a few other cases besides my own of people with Z77 OCF's that are dead and have extremely, if not identical, symptoms. A few i know have, like myself, checked the board for shorts and not found anything out of the ordinary, but it seems important standby voltages aren't coming up when the board is hooked up to PSU; so it won't even attempt to turn on, I/O not getting VCC either since no +5V at power on pins. I've talked to RageBone and it seems there are one or two voltages that can be measured in a very limited area near the ICH, he believes that these boards have all entered some kind of protection mode and that's whats keeping them in this state, …

Does anyone know where to find (or better still, have) drivers for a Foxconn A75M02 motherboard? I'm looking for both Windows 7 x64 and Windows 10 x64 drivers. I have tried the website www.foxconnchannel.com, but that just shows a screenshot of what used to be there. I also searched Goggle, and it showed nothing useful. The best I could find was sites that want me to register, and sites that ZoneAlarm detects viruses on. The driver sites I know to be safe don't have anything for that board. I found Win7-x64 drivers some time ago for an A75MX, which looks from the manual to be the same, except it also has USB 3.0, which the A75M02 doesn't have. It has the same ch…

As per the title. I am setting up a few older benching systems, and want to maximise drive speed. On an X38 motherboard (specifically Maximus Extreme), is it possible to boot from a PCI-e SSD AIC? I don't want to waste my money if they only work on later boards, or worse still, boards that already have an M.2 slot. I can always stick a SATA SSD in, but if I can save a few seconds booting and running benches that access the disk (without paying silly money), then I want that

I recently got a z170 oc formula as scrap and it boots into bios and works fine but when I try to boot into an os it reboots. I have tried two cpus and two kits of ram, reflashing the bios, downclocking the chip, running single channel. I am waiting for my electronics cleaner to arrive but if that doesn't work then I am out of ideas on what may be wrong. If anyone has encountered this problem before let me know if you were able to fix it.

I'm running my 4coredual and I'm finding that at -1c the temp sensor rolls over to 256c, this causes the cpu to thermal throttle and lock to the lowest multiplier. I've not been able to find a way to disable thermal throttling or the sensor in bios. How do I get around this? I've seen people running these boards on ln2 so I know that it's not impossible, I just have yet to figure it out.

4533ghz on air ? well i got 5003mhz with my core i7 980X on 1,7v with a Phanteks cooler. can run stable at 4911mhz and Superpi 2M

Hello guys, I have some weird behavior going on between my 7600K and my Asus Z270 Apex and hope some of you can help. The history looks like this: I used the board and CPU with SS at first and achieved around 5.9-6GHz at 1,65V iirc. Everything worked fine. Then I switched to CPU@water and used my SS to bench legacy GPUs. The CPU used to run at about 5.3-5,55GHz at up to 1.475V on water. Did that many times and the board never missed a beat. Two weeks after one of those sessions I went to turn it on again and only got a "00" post code. Tried everything, didn't work. Next, I sent the CPU to caseking for RMA thinking I fried it somehow and they told me it worked …

Hi guys, theres anyone here to help me improve my cpu? ? Intel Core i7-4720HQ CPU @ 3500.0MHz - 823 XTU marks on HWBOT I mean memory timings, voltages etc. ? for helper!

Hi guys I buy new pc for my someone. his rig is i5-9400F (SRF6M U0 stepp) & ASUS Z370-AII. at first he install windows on ssd and his pc works for a week. after that, pc can boot and he can access bios but at the black screen on entering windows. PC freezed! he cant even install windows. I check this issue with ASUS H310M-C R2.0 with mine pc parts. my friend checked some version of bios as i checked too but issue still exist. I found seemilar things in tomshardware too: https://forums.tomshardware.com/threads/new-system-i5-9400f-not-booting-everything-ok-still-dont-know-whats-wrong-urgent-help-please.3493467/ whats the problem? tnx

Hallo, ich bin neu in dieser Commuinity´eingetreten Ich Brauche Hilfe beim Übertakten von meinem i9 9900kf prozessor. Nun möchte den CPU von 3.6 ghz auf 4 ghz übertakten mit dem Programm Intel(R) Extreme Tuning Utility. Wie erlange ich diese GHZ am besten mit dem Programm und muss ich generel im Bios erstmal dort was freischalten um den PC im Programm zu übertakten? Hier sind meine PC Informationen: Auch verfüge ich über eine H100i Wasserkühlung, als sollte das übertakten von der Temperatur keinen Problem bereiten hier sind meine CPU und Pc Informationen MFG Exory https://ibb.co/KsvCJtg

Hello i am building a media server because if have been donated 12x4 Tb Seagate disks and i want them in raid 0 to get them fast they will only contain large video files 2.5K 4K- 5K 8K and they will be used to downlad on with my 100mb/s fiber connection. but here is my problem what raid card should get? i have a dell H310 but there is no cashe on it. Is there some one who can help me out?

mine arriving tomorrow

This year some famous IT companies did early launch event before the show, that made the Computex more different than before. For sure the new products need to be attractive, that will be better to the pre-show launch event. Attractive enough to catch international buyers, media and consumers’ attention. One of the most typical launch is AMD announced Ryzen 3000 series and Navi GPU. Back to the Computex show, many brands still focus on Gaming products. Used RGB scenario lights to build up many types of computers and gaming gears. First look on Notebook market, after Gaming with RGB lighting, this year most popular design is thin bezel, DELL from US also mak…