_mat_ Posted February 11, 2020 Posted February 11, 2020 Looks like a HWiNFO issue to me. Can you submit a bug report, I will forward it to the HWiNFO dev so he can fix it? Quote
tomekmak Posted February 13, 2020 Posted February 13, 2020 (edited) On 2/12/2020 at 12:20 AM, _mat_ said: Looks like a HWiNFO issue to me. Can you submit a bug report, I will forward it to the HWiNFO dev so he can fix it? I did, just second ago. Did fresh install of Win7 with all drivers. Still same problem. I would love to join some challenges, but i can't cause of error PS. During bugreporting HWinfo crashed. Edited February 13, 2020 by tomekmak Quote
tomekmak Posted February 14, 2020 Posted February 14, 2020 On 2/13/2020 at 1:32 AM, tomekmak said: I did, just second ago. Did fresh install of Win7 with all drivers. Still same problem. I would love to join some challenges, but i can't cause of error PS. During bugreporting HWinfo crashed. By any chance there is a way to use other version of benchmate (where to download older BM) or fix this issue ? Quote
_mat_ Posted February 15, 2020 Posted February 15, 2020 23 hours ago, tomekmak said: By any chance there is a way to use other version of benchmate (where to download older BM) or fix this issue ? I doubt it will work with an old version, nothing has been changed in this regard. Can you download HWiNFO and enable the debug mode there to acquire a HWiNFO.DBG file and upload it here? Your bug report sadly didn't upload this file. Here's a how-to to get the debug file: https://www.hwinfo.com/forum/threads/read-this-before-submitting-a-report.241/ Quote
tomekmak Posted February 15, 2020 Posted February 15, 2020 (edited) 57 minutes ago, _mat_ said: I doubt it will work with an old version, nothing has been changed in this regard. Can you download HWiNFO and enable the debug mode there to acquire a HWiNFO.DBG file and upload it here? Your bug report sadly didn't upload this file. Of course. I send PM to You with dbg. Edited February 15, 2020 by tomekmak Quote
tomekmak Posted February 15, 2020 Posted February 15, 2020 53 minutes ago, _mat_ said: I doubt it will work with an old version, nothing has been changed in this regard. Older version of benchmate doesn't work too. Quote
tomekmak Posted February 15, 2020 Posted February 15, 2020 Awesome support from _mat_. Thank's a lot. Enabling soundcard in BIOS caused BM is up and running. Quote
_mat_ Posted February 15, 2020 Posted February 15, 2020 If you are having trouble with BenchMate crashes due to HWiNFO, you can try to enable or disable the "High Definition Audio" setting in BIOS. I've already worked on a fix with Martin from HWiNFO and it will ship with BenchMate 0.11. Quote
Crew Leeghoofd Posted February 15, 2020 Author Crew Posted February 15, 2020 wtf we have another Unigine Basic soundcard required setting ? 2 Quote
Guest OverclockedTurtle Posted February 19, 2020 Posted February 19, 2020 the box to enable HWinfo for GPUPI v3.2 / v3.3.3 is grayed out, I can't submit my record Quote
_mat_ Posted February 20, 2020 Posted February 20, 2020 12 hours ago, OverclockedTurtle said: the box to enable HWinfo for GPUPI v3.2 / v3.3.3 is grayed out, I can't submit my record You don't need it, BenchMate detects the hardware and sensor data during the run. And don't submit anything with GPUPI, do it with BenchMate => Save Result. Quote
Matsglobetrotter Posted February 27, 2020 Posted February 27, 2020 Are we now allowed to use the benchmate to for example upload results for the standard wprime or any other part of the package subs? or we still have to go back to win7 Quote
_mat_ Posted February 27, 2020 Posted February 27, 2020 (edited) Yes, sure. It has also been added to the rules. It's either BenchMate, Windows 7 or HPET system-wide enabled (if the benchmark uses QPC) for all platforms that suffer the APIC timer bclock bug (Intel Pre-Skylake, AMD). Edited February 27, 2020 by _mat_ Quote
Matsglobetrotter Posted February 27, 2020 Posted February 27, 2020 27 minutes ago, _mat_ said: Yes, sure. It has also been added to the rules. It's either BenchMate, Windows 7 or HPET system-wide enabled (if the benchmark uses QPC) for all platforms that suffer the APIC timer bclock bug (Intel Pre-Skylake, AMD). Great that solves a lot of issues:-) The rules are not clear yet to me. The Benchmate part only refer to AMD processors. Meanwhile the screenshot concerning Win8/10 clearly indicate that we can not. ms All Windows based released before Windows 8 See when Windows 8/10 based operating systems can be used Usage of BenchMate is mandatory for AMD users when using Win8/10 or newer. Quote
_mat_ Posted February 27, 2020 Posted February 27, 2020 Just ignore the 2nd bullet point with the benchmark/platform matrix IF you are using BenchMate, Windows 7 or Intel Skylake+. If you are using Intel before Skylake on Windows 8/10 without BenchMate, you need to check the matrix. Only certain benchmarks are valid in this combination. Quote
tomekmak Posted February 28, 2020 Posted February 28, 2020 Is there any way to add/integrate some other than default benchmarks to bmate ? Quote
OneWolf Posted March 6, 2020 Posted March 6, 2020 Hey was wondering if anyone could help me trouble shoot this issue I am having. Sys config: p55 FTW (a74 bios) i3 530 windows 10 1909 (have tried another older version) I have HPET enabled and I believe I have the right config all around though I may be mistaken (*shrugs) I can launch benchmate it will run the checks then benchmate launches. The timer check readout in the top of the application then does it thing tells me system is ready to bench. Go to start a application within benchmate and it jumps over to the running box (process tree within task manger changes and even pops up a second tree for a sec) then within a few seconds both the task manager process tree and the listing in the running box of benchmate application disappear. This leaves benchmate running but the app I went to launch to never start and run. I can manually launch all the programs from within the app folder and they run. Running as admin has no effect on it either. No error messages just a crash to desktop like experience in a way but benchmate is still running. Any ideas? Quote
_mat_ Posted March 7, 2020 Posted March 7, 2020 Your CPU doesn't support the AES-NI instruction set which is currently necessary to do all the security features fast enough so they have no impact. That said the upcoming version is shortly from being released and will introduce full backwards compatibility for old CPUs. As soon as I have fixed all bugs, it will be available for download. Quote
Massman Posted April 5, 2020 Posted April 5, 2020 I've been running Benchmate lately, great tool. I notice that for SuperPI the Finish dialogue window will not automatically close unless you click 'OK'. If you don't, there will be multiple windows. Is this expected behavior? Quote
_mat_ Posted April 5, 2020 Posted April 5, 2020 It is expected behaviour for now. You can close old finish windows at any time. The advantage of using a modeless message box (instead of a modal one in the original code) is, that it does not disable/block the main dialog. So you can freely move the SuperPi window, which is normally pinned down to its position. You can also close the application at any time without the need of closing message box first. The disadvantage is that it's a bit confusing. To mitigate that I could close any old message boxes when a new run is started. I've put it on the list, it sure is a better solution! 1 Quote
Fasttrack Posted April 5, 2020 Posted April 5, 2020 @_mat_ A bit confused here. Help will be appreciated. Preparing my Asus X570 Impact with 3900X and 3950X for benching. I hear opinions here and there and I would like some responsible answer from the man responsible for Benchmate. Is benchmate obligatory for benching Ryzen ( AMD ) processors on Windows 10 ? If yes, What is the latest version of Benchmate to use and where can I download it from ? And what about benchmarks that are NOT covered by Benchmate ( Geekbench for instance ). Are those run without Benchmate or they are totally forbidden ? Thanks man Quote
_mat_ Posted April 5, 2020 Posted April 5, 2020 The rules of HWBOT specify what can and can't be used to create a valid result for its database. That said, the rules have already been properly updated for the possible use of BenchMate. CINEBENCHR15/R20 for example: https://hwbot.org/news/9946_application_94_rules/ Benchmarks that are not supported by BenchMate can either be benched anyway because they have proper timer validation (3DMark Timespy for example) or can only be benched using Windows 7. Again, this is defined by HWBOT and their rule set for each benchmark. You can download the latest version here: https://benchmate.org Quote
_mat_ Posted May 15, 2020 Posted May 15, 2020 Want to know what's up with BenchMate? Actually a lot! So I have decided to post an update on our Patreon site. These will happen more often again from now on, but certain things will be for supporters only. I'm talking prerelease versions as well so your feedback can be part of the development process. https://www.patreon.com/posts/its-alive-thanks-37143552 1 Quote
ML_azul Posted May 21, 2020 Posted May 21, 2020 (edited) problem found using Nvidia 341.74 driver Edited May 21, 2020 by ML_azul Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.