October 1, 201311 yr had anybody test PSC @ 1300/1333 7-9-7 ? make any different or is the ram clock the key and not the latency of CL7 for 3DMaek 11,Vantage and so on
October 2, 201311 yr I7 4930K cine 5ghz@1.496v ss -40 / 5.2ghz@1.62v cascade -102 batch 3327A694 :-( and 1300mhz memory no go psc bad bad samsung ok dont test others bz I cried... :-) Edited October 2, 201311 yr by T.Rex
October 17, 201311 yr 4930k retail batch# 3332B065 4650 6/12ht vantage cpu test 1.43v/water boot 4700 and 4800 6 core /12ht but unstable for vantage 5 ghz 2core 1.5v for 32m imc 1400+cl9-12-12 32m
October 21, 201311 yr 4960X ES - 3320A573 4500MHz Cinebench R15 @1.13V 4750MHz Cinebench R15 @1.3V config @cold air with watercooling
October 21, 201311 yr Crew That's a 6Ghz CPU easily JB if it scales with cold and voltage my CPU needs 1.42 for 4600GHz CB Edited October 21, 201311 yr by Leeghoofd
October 21, 201311 yr do 2666C11 really need 1.85V just to do 1333 10-12-12? even 1.65V is an overshoot in most cases
October 21, 201311 yr Ahah Sam always the eye for details. Yes it is probably too much, never tried these 4 modules together and i didn't want to worry about that. I still have 7 cpus from this batch to go through so i will see if i was lucky with the first one.
October 22, 201311 yr Crew Darn Allen can you imagine JB will just use it to render new animations for the upcoming Kingston commercial... While we can use it's real power
October 31, 201311 yr Picked up a 4930k from Microcenter Yesterday. batch #3326B667 it did Pretty damn well 4.7ghz at 1.37v on a H100 Temps Sit around 65-70C Full Load with Prime These puppies overclock better when you raise the BLCK instead of just going Multi only. I Ran Prime95 for 3hours and ran 100 runs on Intel Burn test, Dont know if its 100% Stable but this is enough for me. Edited October 31, 201311 yr by Raizel
November 2, 201311 yr ...just got my 4960X 24 hrs ago, so not too much testing / setup yet...batch #3325A993 ...boots into Win7 fine at 5GHz / 1.42v...also seems to like strap 166; will do 4.833Ghz / strap 166 / DDR3 2666 Cinebench R15 at 1.38-1.4v http://valid.canardpc.com/cjjxw7 http://valid.canardpc.com/hzu8an QUESTION / Help please: At 16GB of DDR3 2133 / DDR3 2222, VCCSA and VTT on 'auto' in RIVE use only about 1.0v to 1.05v...but at DDR3 2400 and DDR3 2666, VCCSA and VTT go up to 1.25v to 1.3v... ...with SB-Es / C2s anything more than 1,2v was considered quite bad for longer terms survivability by some...can't find any ""safe"" max values for VCCSA and VTT published for Ivy-E, though have seen several reviews where those can run up to 1.4v, ie w/64GB of RAM...any ideas / links ? TX !
November 2, 201311 yr lucky man, thats a chip with some serious potention.. My chip runs 2800 mem with 1.15V on I/O en SA. I don't feel like using more then 1.2V too, so better tweak it to the lowest stable voltage.
November 2, 201311 yr ...just got my 4960X 24 hrs ago, so not too much testing / setup yet...batch #3325A993 ...boots into Win7 fine at 5GHz / 1.42v...also seems to like strap 166; will do 4.833Ghz / strap 166 / DDR3 2666 Cinebench R15 at 1.38-1.4v http://valid.canardpc.com/cjjxw7 http://valid.canardpc.com/hzu8an QUESTION / Help please: At 16GB of DDR3 2133 / DDR3 2222, VCCSA and VTT on 'auto' in RIVE use only about 1.0v to 1.05v...but at DDR3 2400 and DDR3 2666, VCCSA and VTT go up to 1.25v to 1.3v... ...with SB-Es / C2s anything more than 1,2v was considered quite bad for longer terms survivability by some...can't find any ""safe"" max values for VCCSA and VTT published for Ivy-E, though have seen several reviews where those can run up to 1.4v, ie w/64GB of RAM...any ideas / links ? TX ! We have similar fpo/batch. (mine is 3325A911) der8auer also has (had) a similar one. Ours are 4930k though. I can cinebench @ 4.9 with 1.38 volt watercooled. @5Ghz i need +0.12 volt and temps are raising fast. I need less than 1.2 volt (s.a.) for 3000 Mhz superpi32m But every cpu (and imc) is unique and yours might need some extra voltage for high mem clocks. I believe that anything under 1.20 for both vtt and sa , is supersafe.
November 2, 201311 yr Thanks guys - ...started to play with some of the RIVE settings (it's early Saturday with a Pacific rain storm warning, good timing :-) ) ...DDR3 2333 now has VTT at 1.0v and VCCSA at 1.05v with Cinebench R15 passes ...DDR3 2666 is what I'm working on now; 'capped' VCCSA and VTT at 1.2v in BIOS and it also passes Cinebench R15 and may have more room to lower them...while strap 166 works fine, I'm using strap 125 to dial in as I'm used to that one from tuning my RIVE Bios / SB-E
November 4, 201311 yr 3331B507 looks good. 5 GHz boot 1,460 V 6C12T. 4,7 GHz 1,35 Volt primestable. Will test on LN2 tomorrow. Should do 5,8 - 5,9 Benchstable.
November 6, 201311 yr This is my easy 5G validation. I can boot to windows with this voltage and run something light like 1M http://www.hwbot.org/submission/2448296_tasos_cpu_frequency_core_i7_4930k_5009.93_mhz/ And this 5.2G is on the edge (watercooled). http://www.hwbot.org/submission/2448300_tasos_cpu_frequency_core_i7_4930k_5200_mhz
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.