32 minutes ago, Digg_de said:

Sry my bad.. i restore the Image again and now it works.

 

edit:  Oh man i am not really concentrated this evening.. at second try i've choose the wrong image (barbonets xp).. thats why it works...

my image is barbonenet xp z270 modded 

Edited November 13, 20195 yr by antome

On 11/7/2019 at 3:56 AM, GtiJason said:

I thought most benchers knew this has been possible for a while now. Here is the "0094" bios I modded to work on M9A XP w/ HT back in 2018

Creative.ROM 16 MB · 7 downloads

Thanks, I didn't know that, but I've sat last months under the rock, so you know...

 

Update - it doesn't support 9100f

Edited November 15, 20195 yr by phobosq

 

guys you can run all the usb ports of the XI gene / apex on xp, 

for asmedia and intel 3.0,3.1 this drivers

any problem-free device will be personally tested ;)

On 11/15/2019 at 3:35 PM, phobosq said:

Thanks, I didn't know that, but I've sat last months under the rock, so you know...

 

Update - it doesn't support 9100f

Yeah, this was pre CFL Refresh⁴. I'll check if I have newer one or try to make one for you when I can get to it

Thanks for the guide, did the update V2 on z390 gene with 32 bit xp and works quite well with 32m...will do xp64 soon for 3D 01

On 11/15/2019 at 3:35 PM, phobosq said:

Thanks, I didn't know that, but I've sat last months under the rock, so you know...

 

Update - it doesn't support 9100f

 

On 11/8/2019 at 11:58 PM, aerotracks said:

Z390 Dark OS modded with Z390 ASUS files makes XP work on X299 Dark 

AH! This is exactly what I needed lol. Was in the thread to make XP work on M11 and got X299 DARK solution as well! Thank you everyone for the knowledge!

Anyone managed to make an Acronis image for us lazy folk? ?

On 11/27/2019 at 4:24 PM, sabishiihito said:

Anyone managed to make an Acronis image for us lazy folk? ?

Download - Windows Xp x32 Z390 spi edition Asmedia usb, with only asmedia usb driver (the two above the hdmi port)

Download - Windows Xp x32 Z390 spi edition all usb, with Asmedia and Intel usb driver, all usb port working

ps: you'll probably have to connect a ps2 mouse initially to confirm the installation of the new hardware on Xp at the first boot, the images work safely on the Z390 XI Gene, Z390 XI Apex and Z270 IX Apex boards on other motherboards you have to try

test spi32 5g ?

Edited December 19, 20204 yr by antome

On 11/27/2019 at 6:53 PM, antome said:

Download - Windows Xp x32 Z390 spi edition Asmedia usb, whit only asmedia usb driver (the two above the hdmi port)

Download - Windows Xp x32 Z390 spi edition all usb, whit Asmedia and Intel usb driver, all usb port working

ps: you'll probably have to connect a ps2 mouse initially to confirm the installation of the new hardware on Xp at the first boot, the images work safely on the Z390 XI Gene, Z390 XI Apex and Z270 IX Apex boards on other motherboards you have to try

test spi32 5g ?

hi guys, has anyone managed to get xp x64 to work properly?  To me it starts only in safe mode, in normal mode I get a nice blue screen

 
in normal mode i get this error

Edited December 3, 20195 yr by antome

For whatever reason, XP install that works on Asus and EVGA Z390 isn't working on Asrock ITX Phantom-AC.  Gives the usual ACPI complaint BSOD.  I wonder if there's something special about the Asrock BIOS?

Is 32bit edition OK for Windows XP?

Finally got this working! Excited to run 32M this week on the juice

Finally got around to trying this. Everything worked no issues. Thanks to Stavros for putting together the guide, and the winraid guys for all the effort keeping xp alive!

With a few adjustments, this also works well for an upcoming Intel platform. I'll publish more details when it's not under NDA. The Intel AHCI driver seems to work well by just adding the new device id. Great work from @antome finding that the AMD XHCI driver for Windows XP also works on new Intel controllers 

Edited March 31, 20205 yr by elmor

What about those of us with z390 boards that are without PS/2 or third party USB controllers? The XP acronis image from above boots to desktop but I can't interact with the new hardware wizard to get the USB ports working since all the ports in question are handled by the z390. Any solutions?
 

I've tried several third party PCIE USB cards with same issue. Need to confirm the install of the drivers. Heck, I've even tried a PCIE to Serial card with same issue. Need to interact with the new hardware wizard to get the drivers going?

 

Seems like all the next gen boards and tech in general are going to be Win 10 64bit only (even 32bit version of Win10 has barely any drivers for z390). Bleak future...

 

Edited April 24, 20205 yr by lunatic999

7 hours ago, lunatic999 said:

What about those of us with z390 boards that are without PS/2 or third party USB controllers? The XP acronis image from above boots to desktop but I can't interact with the new hardware wizard to get the USB ports working since all the ports in question are handled by the z390. Any solutions?
 

I've tried several third party PCIE USB cards with same issue. Need to confirm the install of the drivers. Heck, I've even tried a PCIE to Serial card with same issue. Need to interact with the new hardware wizard to get the drivers going?

 

Seems like all the next gen boards and tech in general are going to be Win 10 64bit only (even 32bit version of Win10 has barely any drivers for z390). Bleak future...

 

I've never had issues using syba usb 2.0 pcie card, driver is usually already installed as long as it uses  NEC 720101 chipset. Should work with Antomes full usb .tib from above. This one download . I use this card https://www.sybausa.com/index.php?route=product/product&path=64_186_90&product_id=232

Or you can try usb to ps2 adaptor, use another platform to get by the confirm drivers issue or slipstream the pcie to usb card drivers using an iso instead of Accronis backup

My procedure for installing Windows XP on M12A, derived from previous work 

Firahelper for Z490: https://1drv.ms/u/s!Atmpv-6qHr_6vcIGjGDDdVQjURrIcA?e=JTDLyq

Then the ISO needs to be modified:

1. Extract your ISO using 7-zip to a temporary folder and go to the “i386” subfolder
2. Replace “ACPI.SY_” and “SYSSETUP.DL_” with the files from “Z390 Files.zip”:
3. Extract DRIVERS.CAB and SP3.CAB using 7-zip
4. Replace “acpi.sys” in those folders (if it exists, may be missing in SP3.CAB) with the file from “Z390 Files.zip”
5. Re-package the “DRIVERS” and “SP3” folders to DRIVERS.CAB and SP3.CAB using CabPack: https://download.cnet.com/CabPack/3000-2250_4-75805653.html
6. Open the temporary folder in nLite and select only the “Bootable ISO” stage
7. After making the ISO, save it as XP.iso on your flash drive together with the firahelper for Z490. Use the USB root files from here: 
8. For XP USB support using the Intel USB ports, use this driver: https://mega.nz/#!KBIzxSAB!nZYWTcAC0v3wThuq0lFKUKarnv7Nh73655zFE2mJ7to

On 5/21/2020 at 6:42 AM, elmor said:

My procedure for installing Windows XP on M12A, derived from previous work 

Firahelper for Z490: https://1drv.ms/u/s!Atmpv-6qHr_6vcIGjGDDdVQjURrIcA?e=JTDLyq

Then the ISO needs to be modified:

1. Extract your ISO using 7-zip to a temporary folder and go to the “i386” subfolder
2. Replace “ACPI.SY_” and “SYSSETUP.DL_” with the files from “Z390 Files.zip”:
3. Extract DRIVERS.CAB and SP3.CAB using 7-zip
4. Replace “acpi.sys” in those folders (if it exists, may be missing in SP3.CAB) with the file from “Z390 Files.zip”
5. Re-package the “DRIVERS” and “SP3” folders to DRIVERS.CAB and SP3.CAB using CabPack: https://download.cnet.com/CabPack/3000-2250_4-75805653.html
6. Open the temporary folder in nLite and select only the “Bootable ISO” stage
7. After making the ISO, save it as XP.iso on your flash drive together with the firahelper for Z490. Use the USB root files from here: 
8. For XP USB support using the Intel USB ports, use this driver: https://mega.nz/#!KBIzxSAB!nZYWTcAC0v3wThuq0lFKUKarnv7Nh73655zFE2mJ7to

Thanks for recipe elmor!

On 11/27/2019 at 11:53 AM, antome said:

Download - Windows Xp x32 Z390 spi edition Asmedia usb, whit only asmedia usb driver (the two above the hdmi port)

Download - Windows Xp x32 Z390 spi edition all usb, whit Asmedia and Intel usb driver, all usb port working

ps: you'll probably have to connect a ps2 mouse initially to confirm the installation of the new hardware on Xp at the first boot, the images work safely on the Z390 XI Gene, Z390 XI Apex and Z270 IX Apex boards on other motherboards you have to try

test spi32 5g ?

Any idea  why this all usb edition would start asking me for login password ? It don't think it did this when tested before

On 6/1/2020 at 9:12 AM, GtiJason said:

Any idea  why this all usb edition would start asking me for login password ? It don't think it did this when tested before

 

Strange I have not set any login password, it starts without problems

Hello
Will this boot on the Z490?

I’m having troubles installing XP32 to M12A with the method described by Elmor above. Made ISO, copied to flash with firahelper 490. Booting from usb stick im getting into menu, chosing instal win xp txt mode, it starts and after F6 and F2 messages during installation i’m getting error i386/ntkrnlmp.exe . Could anyone help me with this issue?

16 hours ago, Aurosonic said:

I’m having troubles installing XP32 to M12A with the method described by Elmor above. Made ISO, copied to flash with firahelper 490. Booting from usb stick im getting into menu, chosing instal win xp txt mode, it starts and after F6 and F2 messages during installation i’m getting error i386/ntkrnlmp.exe . Could anyone help me with this issue?

NVM, successfully installed from dvd-rw, that Firahelper stuff doesn't work to me at all whatever i do.

On 12/4/2019 at 12:39 AM, antome said:

hi guys, has anyone managed to get xp x64 to work properly?  To me it starts only in safe mode, in normal mode I get a nice blue screen
in normal mode i get this error

Hi. Did you find the workaroud for this error ? Im trying to instal XP x64 and getting this bsod at second phase of installation when windows says “Installing Devices”