FireKillerGR Posted May 26, 2020 Author Posted May 26, 2020 21 minutes ago, kicsipapucs said: Pls, if you can, put in 9800GX2/GTX295 and/or GTX590 too. Those did not work on X299 already, hopefully Z390 is not the last system to run them. okie will see if I got any alive and will give it a try (295/9800gx2) 1 Quote
keeph8n Posted May 26, 2020 Posted May 26, 2020 HD4870 and HD5770 both fired up here no problem 1 Quote
FireKillerGR Posted May 26, 2020 Author Posted May 26, 2020 Btw, haven't tested other drivers yet but the usb ones for xp will work as soon as you install via device manager and disable digital signature. 1 3 Quote
Splave Posted May 26, 2020 Posted May 26, 2020 3 hours ago, FireKillerGR said: Btw, haven't tested other drivers yet but the usb ones for xp will work as soon as you install via device manager and disable digital signature. you mean you dont have to solder on a ps2 connector lulz? 4 Quote
FireKillerGR Posted May 26, 2020 Author Posted May 26, 2020 (edited) 43 minutes ago, Splave said: you mean you dont have to solder on a ps2 connector lulz? lol Dont worry Apex 13 will have wireless PS/2 Edited May 26, 2020 by FireKillerGR 4 Quote
kicsipapucs Posted May 28, 2020 Posted May 28, 2020 Anybody tried A0/1 bdie yet even just for fun? What did you get? Quote
Rauf Posted May 28, 2020 Posted May 28, 2020 1 hour ago, kicsipapucs said: Anybody tried A0/1 bdie yet even just for fun? What did you get? Yes, about same as before. Waza passes 10-20mhz higher 2 1 Quote
FireKillerGR Posted May 28, 2020 Author Posted May 28, 2020 GTX 580 boots fine - gtx 295 is dead (totally forgot about it). Will try to test the 9800gx2 next. 2 Quote
Alex@ro Posted May 28, 2020 Posted May 28, 2020 8 hours ago, Rauf said: Yes, about same as before. Waza passes 10-20mhz higher Yupp, my best A0 kit does 4260-70 12-11 wazza compared to max 4240 on z270/370/390 but geekbench is lower for some reason, guess more threads means more memory to use, from 4350 12-11 on z370/90 went to 4300 12-11.... 2 2 Quote
FireKillerGR Posted May 28, 2020 Author Posted May 28, 2020 9800GX2 seems to post as well even tho the card is dead (artifacts) Also, posted alternative USB drivers on main post with instructions for win7. Should work fine but will verify myself tomorrow. 1 2 1 Quote
Administrators websmile Posted May 29, 2020 Administrators Posted May 29, 2020 I finally got my CPU from a german online shop, I7 bc boxed i9 is paid but not in stock until x-mas obviously In general handling was easy at board level, despite having zero experience with coffeelake R aka 9900k, oc was easy and reliable, I saw improvment on LLC-handling and I am quite impressed. A few results for the start 3 Quote
DStealth Posted May 29, 2020 Posted May 29, 2020 (edited) Impressively low voltage for 5400...but the efficiency seems low for R15 from the other point of view ...9900 exceeds 2400pts with ~5400MHz Edited May 29, 2020 by DStealth Quote
str8_an94baller Posted May 30, 2020 Posted May 30, 2020 What kind of memory oc problems encountered with ucode removal? Would the ucode removal provide a small boost on other benchmarks such as cinebench or 3dmark? Quote
FireKillerGR Posted May 31, 2020 Author Posted May 31, 2020 7 minutes ago, barti27 said: please bios 0003,0024,0021 Try the official one that has profiles in it - previous ones dont have any advantages. Quote
FireKillerGR Posted May 31, 2020 Author Posted May 31, 2020 15 hours ago, str8_an94baller said: What kind of memory oc problems encountered with ucode removal? Would the ucode removal provide a small boost on other benchmarks such as cinebench or 3dmark? You get limited memory frequency of around 3800 if you don't use the legacy overclocking option without ucode. You need to test but cinebench benefits from having the ucode included Quote
Splave Posted May 31, 2020 Posted May 31, 2020 On 5/29/2020 at 1:10 PM, DStealth said: Impressively low voltage for 5400...but the efficiency seems low for R15 from the other point of view ...9900 exceeds 2400pts with ~5400MHz R15 needs micro code delete bios. -70 to 80 on 10900k here. 1 Quote
l0ud_sil3nc3 Posted June 1, 2020 Posted June 1, 2020 4 hours ago, dumo said: Testing bdie c13 1t Very nice dumo! Try 13-12-12 > 4400 1 Quote
safedisk Posted June 1, 2020 Posted June 1, 2020 6 hours ago, dumo said: Testing bdie c13 1t nice! 1 Quote
dumo Posted June 1, 2020 Posted June 1, 2020 2 hours ago, l0ud_sil3nc3 said: Very nice dumo! Try 13-12-12 > 4400 >4700 c13 1t with cold should be nice 4 Quote
str8_an94baller Posted June 1, 2020 Posted June 1, 2020 (edited) 17 hours ago, FireKillerGR said: You get limited memory frequency of around 3800 if you don't use the legacy overclocking option without ucode. You need to test but cinebench benefits from having the ucode included what does legacy memory oc mode change? curious to learn beforehand since I still don't have my system setup what benchmarks, if any, benefit from the ucode delete? Edited June 1, 2020 by str8_an94baller Quote
Hiwa Posted June 1, 2020 Posted June 1, 2020 (edited) Just for fun Edited June 1, 2020 by Hiwa 7 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.