FireKillerGR Posted November 30, 2012 Posted November 30, 2012 L224C371 Air 4C/8T 50x100 SPI32M 1.286v...4C/8T 51x100 SPI32M 1.365v IMC 2975MHz 1 Quote
Wizerty Posted December 3, 2012 Posted December 3, 2012 3218c043 7000Ghz+ 1c/1t 6500 wprime 1024 4c/8t for less than 1.8v Screen after more than 3hours under cold... Can probably push highter with "hot" mobo&VRM. http://hwbot.org/submission/2333021_wizerty_cpu_frequency_core_i7_3770k_7022.39_mhz?recalculate=true Quote
Hiwa Posted December 3, 2012 Posted December 3, 2012 3132b461 5ghz 1.49 32m 1c very unstable Max imc 2700 32m Still cant find any 5ghz for tight benching Quote
GUN'G'STAR Posted December 3, 2012 Posted December 3, 2012 just finished binning 12pcs of 3226b979 shitty batch, none of cpu can load win at 1,32v Quote
Alex@ro Posted December 5, 2012 Posted December 5, 2012 3218B987 5 Ghz 1.20 2c can do 32M as well 5 ghz 1.22 4c with HT 5500 max on air Spi 32M Good imc,2933 works flawless... http://img708.imageshack.us/img708/1919/screen006js.jpg http://img31.imageshack.us/img31/5131/screen009z.jpg 1 Quote
Alex@ro Posted December 5, 2012 Posted December 5, 2012 Thank you guys,i've been searching for a good ivy like no tomorrow.Will test on Asrock oc formula too see what's up then time to give some cold to this fucker Quote
FireKillerGR Posted December 6, 2012 Posted December 6, 2012 Its time to post some results isnt it? 5Ghz 4core HT enabled: Imc 2950Mhz Spi32M: 2970Mhz not Spi32M stable Quote
Hiwa Posted December 6, 2012 Posted December 6, 2012 that's awesome cpu core and IMC , try higher IO maybe it's 3.0GHz 32m CPU. Quote
FireKillerGR Posted December 6, 2012 Posted December 6, 2012 Thanks Will try. Can do 2900-2940 16Gb but need to pass the 2970 wall what vtt and vcssa to use? for 3K on air? Quote
FireKillerGR Posted December 7, 2012 Posted December 7, 2012 IMC's Score Update: 3030Mhz achieved on air. Thanks Hiwa Quote
Freakezoit Posted December 13, 2012 Posted December 13, 2012 Batch 3230B370 #2890 5GHz 32M 4/8 ~1.34v Boot was around 1.32v all cores. MSi z77 mpower IMC 3000+ postcode 55 Time to get good Hynix or Samsung mem`s Quote
nachtfalke Posted December 14, 2012 Posted December 14, 2012 batch#3229A925 air test: 5 ghz4/8 1,350v LN2: max 6525 , over 1,850v no more scaling , 3D around 6100-6150 very hard http://valid.canardpc.com/show_oc.php?id=2615180 Quote
nachtfalke Posted December 16, 2012 Posted December 16, 2012 (edited) Batch# 3233B929- Costa Rica max cpu frecv: 6360mhz / full pot ( -196) / 2.0 V ftw ...2.05 v = cpu kaput ... http://valid.canardpc.com/show_oc.php?id=2617219 Edited January 12, 2013 by nachtfalke Quote
K404 Posted December 16, 2012 Posted December 16, 2012 (edited) 3231B652 (CR) 1.35v 4/4 = no boot. 1.40v = boot + SPI32M IMC: 1333 yes, 1400 no. (11-13-13, sensible IMC volts) Edited December 16, 2012 by K404 Quote
Crew stummerwinter Posted December 21, 2012 Crew Posted December 21, 2012 (edited) 3229A858 32M @ 50x100x2400 with 1,17 V 32M @ LN2: hwbot.org/submission/2332384_stummerwinter_superpi_32m_core_i7_3770k_4min_43sec_672ms R.I.P. Edited December 21, 2012 by stummerwinter 1 Quote
DOM. Posted December 22, 2012 Posted December 22, 2012 3229A858 32M @ 50x100x2400 with 1,17 V 32M @ LN2: hwbot.org/submission/2332384_stummerwinter_superpi_32m_core_i7_3770k_4min_43sec_672ms R.I.P. Mr.Fail is right lol all around here is a bunch of costa rica rma wont even boot @5GHz on water :banana: Quote
Andrix85 Posted December 31, 2012 Posted December 31, 2012 Quick test on LN2 batch 3218B976... 6.683mhz Pi 1MB and 6.570mhz 3DM benchable 4c/4t... I try next week 2c/2t Quote
Alex@ro Posted December 31, 2012 Posted December 31, 2012 Nice,how much voltage did it need on air for 5 ghz? Quote
Crazzzy85 Posted December 31, 2012 Posted December 31, 2012 Costa rica 3230B378 4/8 50x100 2400 1,288V 32m Quote
ChanceCoats123 Posted December 31, 2012 Posted December 31, 2012 Doesn't clock too well on air: 5ghz @ 1.35v 2400 on the ram (not max), but ran to 6100 4c/8t and 6160 2c/2t on DIce. http://valid.canardpc.com/show_oc.php?id=2633370 http://valid.canardpc.com/show_oc.php?id=2633306 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.