May 28, 201312 yr I got some presents today For sure I am better ocer than photographer Yay! Can't wait to hear some thoughts from non-sampled user.
June 14, 201311 yr I am now having exams... no time for OC. I only quickly tested EK-SF3D Triple Point EVO (dram pot) and it's very good My PSC are easy stable 2600+ CL6-10-6-28 TWCL 6. More tests after 25.06
June 17, 201311 yr Review (non sampled) by OverCleX: http://www.overclex.net/articles/test-du-ek-sf3d-triple-point-evo/
June 17, 201311 yr How about full pot? That would be a bad time on Samsung, -20c to -50c is more than enough. PSC/BBSE would be nice to see at cooler temps, or just to see what it would pull down to when the pot is full and they are running 2+ volts. The KPC Ney Pro with SF3D plates has been the coldest (-162c) I have ever seen on dimm temps, followed by the SF3D Triple Point and lastly the OG Dominance.
June 17, 201311 yr I ran PSC at full pot but didn't gain much over -100°C with the particular bin I had on hand. This pot can do at least -185°C without problems.
June 17, 201311 yr Words of 8Pack: RAM pot is going great. Did some really nice clocks this weekend using it on BBSE.
June 17, 201311 yr I ran PSC at full pot but didn't gain much over -100°C with the particular bin I had on hand. This pot can do at least -185°C without problems. You got the actual temp of the dimm to -185c? I have never been able to do that with spreaders or without. Either way I think I am going to have to try one of these out:)
June 17, 201311 yr Going to leave this here done at 26 ambient with samsung: http://valid.canardpc.com/show_oc.php?id=2830480 3000 10-13-13 air 32M no problem,seriously you could pick a better memory for testing ln2 pot,i mean lol...
June 18, 201311 yr Perica_baari also gearing up! Waiting for first results! Hopefully you didn't steal that plasticine from a child.
June 18, 201311 yr @The Stilt: Hehe P.S.: You will be getting the AMD Mounting some time around June 26th. Please PM me with your address.
June 18, 201311 yr The awaited adapter plate for EK-SF3D Triple Point memory cooling is now here! It features AMD S940/939/754 mounting hole pattern and you can fit: 1) single-stage or cascade phase change evaporator 2) CPU water block - for example EK-Supremacy - with TEC / Peltier 3) your old CPU pot if you have room for it Universal mounting mechanism with very long countersunk M4 screws, washers, nuts, springs and thumb nuts will be included. Edited June 18, 201311 yr by tiborrr
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.