Some 5G 32M testing with DS MFR... so you don't have to

 

3000C11 - 6:01:984

 

3100C12 6:01:953

 

3200C13 6:01:734

 

3270C14 6:01:719

 

3333C15 6:01:578

 

No further scaling with C16

Dual Side MFR same stronger then Single Side?

Dual Side MFR same stronger then Single Side?

 

Should be since it has rank interleave... but it's been quite hard to push dual sided DIMM's this gen.

So far clock advantage of single sided MFR is stronger than performance advantage of these dual rank sticks. I did some testing in XTU as well, but the results aren't worth writing home about

Your tooooo fast bully! Really set the bar high

 

 

 

Fast enough - I tested some 4gb and 8gb Samsung E-die lately, Patriots really doing good

best gskill on volts I had, but 1T does not work on my boards with these above 2K

2x8GB 3200c16 kit, only 8GB Samsung E I could get atm, should do it as good as any other kit, on OCF I have first time real advantage over Hero with these, 3600 did not work for me on other board

Fast enough - I tested some 4gb and 8gb Samsung E-die lately, Patriots really doing good

best gskill on volts I had, but 1T does not work on my boards with these above 2K

2x8GB 3200c16 kit, only 8GB Samsung E I could get atm, should do it as good as any other kit, on OCF I have first time real advantage over Hero with these, 3600 did not work for me on other board

 

That first pic the ones that are coming to america to stay with me?

Yours are around same range, a bit more volts at slightly diferent settings, the kit at the screen was sold earlier, I do not keep any bench sticks at all, I sell all directly after tests

Your tooooo fast bully! Really set the bar high

 

 

 

 

 

Nice! and nice to see some Pi mate

Yours are around same range, a bit more volts at slightly diferent settings, the kit at the screen was sold earlier, I do not keep any bench sticks at all, I sell all directly after tests

 

Treating ddr4 like a dirty 2bit wh@re!

Lol, no, only change in priorities, other than in the past on especially DDR2 and DDR3 I neither bench nor need reference kits anymore, keeping DDR4 is only dead money in my drawer

J4S (just for spam)

 

Some more tuning, still on dirty dirty OS all air cooled on memory and AIO for cpu's (ambient is 68-70f)

 

4Ghz AFR

 

 

 

5Ghz AFR

 

 

now I got a new bios to test and added a healthy dose of vitamin V

 

AFR 1.97v (set in bios)

 

 

 

new bios is solid Mr. Shih Shih will release update @ XS just putting finishing touches on it, you guys are gonna like it

Nice man,you going to make me try unhealthy amount of V now ahah

 

Sent from my E2353 using Tapatalk

Nice man,you going to make me try unhealthy amount of V now ahah

 

I think we should all pitch in a few bucks and have someone run loops of 32M in steps of .05V to see when sticks die. Could get a kit of MFR, AFR, E-Die, B-Die, etc.

Tries 2. 05v on air, no problems yet

 

Sent from my SM-N910F using Tapatalk

Edited December 4, 20159 yr by Alex@ro

I confirm, e-die survived hours of 2 volts from bios here, all air.

Here is the M OCF All air

 

 

seems its will do the same as OCF but at 1 higher mem divider.

SammyE 2.2v air survived.....maybe i made a little burn-in on them with so high voltage.....now they work better than before

 

Sent from my E2353 using Tapatalk

Lmao e-die is good for whatever you can throw at it..

 

Damn i want the lil board. I wont have any ln2 by the time ots out

Here is the M OCF All air

 

seems its will do the same as OCF but at 1 higher mem divider.

 

Still thinking mid December?

Here is the M OCF All air

 

 

seems its will do the same as OCF but at 1 higher mem divider.

 

Here is the M OCF All air

 

 

seems its will do the same as OCF but at 1 higher mem divider.

DAT Vcore though. [emoji33]

 

Sent from my A0001 using Tapatalk

DAT Vcore though. [emoji33]

 

Sent from my A0001 using Tapatalk

 

 

It's a miss reading from the sensor, every chip I have shows something different depending on the version of cpuz and board, it's bizarre.