aerotracks Posted December 1, 2015 Posted December 1, 2015 Some 5G 32M testing with DS MFR... so you don't have to 3000C11 - 6:01:984 3100C12 6:01:953 3200C13 6:01:734 3270C14 6:01:719 3333C15 6:01:578 No further scaling with C16 Quote
RULE Posted December 1, 2015 Posted December 1, 2015 Dual Side MFR same stronger then Single Side? Quote
xxbassplayerxx Posted December 1, 2015 Posted December 1, 2015 Dual Side MFR same stronger then Single Side? Should be since it has rank interleave... but it's been quite hard to push dual sided DIMM's this gen. Quote
aerotracks Posted December 2, 2015 Posted December 2, 2015 So far clock advantage of single sided MFR is stronger than performance advantage of these dual rank sticks. I did some testing in XTU as well, but the results aren't worth writing home about Quote
l0ud_sil3nc3 Posted December 2, 2015 Posted December 2, 2015 Your tooooo fast bully! Really set the bar high Quote
Administrators websmile Posted December 2, 2015 Administrators Posted December 2, 2015 Fast enough - I tested some 4gb and 8gb Samsung E-die lately, Patriots really doing good best gskill on volts I had, but 1T does not work on my boards with these above 2K 2x8GB 3200c16 kit, only 8GB Samsung E I could get atm, should do it as good as any other kit, on OCF I have first time real advantage over Hero with these, 3600 did not work for me on other board Quote
GtiJason Posted December 2, 2015 Posted December 2, 2015 Fast enough - I tested some 4gb and 8gb Samsung E-die lately, Patriots really doing good best gskill on volts I had, but 1T does not work on my boards with these above 2K 2x8GB 3200c16 kit, only 8GB Samsung E I could get atm, should do it as good as any other kit, on OCF I have first time real advantage over Hero with these, 3600 did not work for me on other board That first pic the ones that are coming to america to stay with me? Quote
Administrators websmile Posted December 2, 2015 Administrators Posted December 2, 2015 Yours are around same range, a bit more volts at slightly diferent settings, the kit at the screen was sold earlier, I do not keep any bench sticks at all, I sell all directly after tests Quote
Guest Bullant Posted December 2, 2015 Posted December 2, 2015 Your tooooo fast bully! Really set the bar high Nice! and nice to see some Pi mate Quote
GtiJason Posted December 2, 2015 Posted December 2, 2015 Yours are around same range, a bit more volts at slightly diferent settings, the kit at the screen was sold earlier, I do not keep any bench sticks at all, I sell all directly after tests Treating ddr4 like a dirty 2bit wh@re! Quote
Administrators websmile Posted December 2, 2015 Administrators Posted December 2, 2015 Lol, no, only change in priorities, other than in the past on especially DDR2 and DDR3 I neither bench nor need reference kits anymore, keeping DDR4 is only dead money in my drawer Quote
l0ud_sil3nc3 Posted December 3, 2015 Posted December 3, 2015 Some more tuning, still on dirty dirty OS all air cooled on memory and AIO for cpu's (ambient is 68-70f) 4Ghz AFR 5Ghz AFR now I got a new bios to test and added a healthy dose of vitamin V AFR 1.97v (set in bios) new bios is solid Mr. Shih Shih will release update @ XS just putting finishing touches on it, you guys are gonna like it Quote
Guest Bullant Posted December 3, 2015 Posted December 3, 2015 Nice man,you going to make me try unhealthy amount of V now ahah Quote
Guest barbonenet Posted December 4, 2015 Posted December 4, 2015 Sent from my E2353 using Tapatalk Quote
xxbassplayerxx Posted December 4, 2015 Posted December 4, 2015 Nice man,you going to make me try unhealthy amount of V now ahah I think we should all pitch in a few bucks and have someone run loops of 32M in steps of .05V to see when sticks die. Could get a kit of MFR, AFR, E-Die, B-Die, etc. Quote
Alex@ro Posted December 4, 2015 Posted December 4, 2015 (edited) Tries 2. 05v on air, no problems yet Sent from my SM-N910F using Tapatalk Edited December 4, 2015 by Alex@ro Quote
phobosq Posted December 4, 2015 Posted December 4, 2015 I confirm, e-die survived hours of 2 volts from bios here, all air. Quote
Splave Posted December 4, 2015 Posted December 4, 2015 Here is the M OCF All air seems its will do the same as OCF but at 1 higher mem divider. Quote
Guest barbonenet Posted December 4, 2015 Posted December 4, 2015 SammyE 2.2v air survived.....maybe i made a little burn-in on them with so high voltage.....now they work better than before Sent from my E2353 using Tapatalk Quote
Random Posted December 4, 2015 Posted December 4, 2015 Lmao e-die is good for whatever you can throw at it.. Damn i want the lil board. I wont have any ln2 by the time ots out Quote
xxbassplayerxx Posted December 4, 2015 Posted December 4, 2015 Here is the M OCF All air seems its will do the same as OCF but at 1 higher mem divider. Still thinking mid December? Quote
l0ud_sil3nc3 Posted December 4, 2015 Posted December 4, 2015 Here is the M OCF All air seems its will do the same as OCF but at 1 higher mem divider. Quote
rtsurfer Posted December 4, 2015 Posted December 4, 2015 Here is the M OCF All air seems its will do the same as OCF but at 1 higher mem divider. DAT Vcore though. [emoji33] Sent from my A0001 using Tapatalk Quote
l0ud_sil3nc3 Posted December 4, 2015 Posted December 4, 2015 DAT Vcore though. [emoji33] Sent from my A0001 using Tapatalk It's a miss reading from the sensor, every chip I have shows something different depending on the version of cpuz and board, it's bizarre. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.