Pr3mium Posted January 6, 2021 Posted January 6, 2021 I just tried the AGESA 1190 on my B550 E-Gaming and it runs 2100FCLK without any Problems. Maybe I will test it again with my C8 Impact. 1 Quote
Achill3uS Posted January 7, 2021 Posted January 7, 2021 Does anyone managed usb working for win 7 on Impact? Quote
5erveD Posted January 7, 2021 Posted January 7, 2021 11 hours ago, Achill3uS said: Does anyone managed usb working for win 7 on Impact? I had googled some stuff. Haven't gotten to it yet. Waiting on a ps/2 pci card. Afaik you need to mod the device id for the usb driver so it can be regonized. Maybe these links will help you. Please report back if you have found a way to get working.https://www.sevenforums.com/drivers/419688-will-new-amd-x570-chipset-mobos-have-win-7-chipset-drivers.htmlhttps://www.win-raid.com/t4960f52-Solution-Win-Drivers-for-USB-Controllers-of-new-AMD-Chipset-Systems.html 1 Quote
Achill3uS Posted January 8, 2021 Posted January 8, 2021 (edited) Thanks for the tips it was good to start with.. Actually found a link for modded drivers to x570 on other forum: https://retrosystemsrevival.blogspot.com/2019/12/windows-7-usb-3031-amd-x570-drivers.html?fbclid=IwAR0pRDU_ts0rZb5mQ5OsCqM0B6rU5L6dKmvV3XgvufXbXgrKAYMLe2iGItA But since i do not have an am4 board with ps2 to prepare the install, I've asked a friend of mine to do it for me then simply booted from that pre-installed drive with usb drivers. It loaded a bit for a minute or two but after that works like a charm. Actually on the Impact not much slots left for a ps2 pcie card anyway haha. So credits goes to my buddy @northsys . Benchmarks to come... Edited January 8, 2021 by Achill3uS 3 1 Quote
noizemaker Posted January 9, 2021 Posted January 9, 2021 Version 3102 Beta Version 2021/01/06 20.38 MBytes ROG CROSSHAIR VIII DARK HERO BIOS 3102 Update AMD AM4 AGESA V2 PI 1.1.9.0. Improve ReSize Bar function Improve RAID function Improve system performance and compatibilityhttps://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR_VIII_DARK_HERO/ROG-CROSSHAIR-VIII-DARK-HERO-ASUS-3102.ZIP ----------------- Version 3102 Beta Version 2021/01/06 20.22 MBytes ROG CROSSHAIR VIII IMPACT BIOS 3102 Update AMD AM4 AGESA V2 PI 1.1.9.0. Improve ReSize Bar function Improve RAID function Improve system performance and compatibility https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR_VIII_IMPACT/ROG-CROSSHAIR-VIII-IMPACT-ASUS-3102.ZIP Quote
flanker Posted January 9, 2021 Posted January 9, 2021 I am afraid this betas...I think, best one is still 3001 Quote
Achill3uS Posted January 10, 2021 Posted January 10, 2021 11 hours ago, flanker said: I am afraid this betas...I think, best one is still 3001 You mean 3003? I don't see any 3001... 1 Quote
mahaudi Posted January 17, 2021 Posted January 17, 2021 (edited) First Run 5950x on Impact / Bios 3101 with IF 1400 Mhz goes ~ - 185°c.... after than I have many problems. Tested everything ... all the time ,...I have CB @ ~ - 130°c and cbb with - 122°c F**k A hours later the Set/CPU goes best with IF 1900. ?? Yes... IF 1900 Mhz 1:1 3800 Mhz RAM. But I have CB @ ~ - 152°c and cbb @ - 142°c. https://hwbot.org/submission/4658392_mahaudi_cinebench___r20_ryzen_9_5950x_14473_marks Tested with LN2 Jumper ON and OFF. Nothing helps. ...the same...... As if it wouldn't work Teste many IF Settings.... nothing helps . ? I've heard this behavior a few times on the Asus Boards. Apparently they just want to bring the Dark Hero to the front under LN2. Maybe I will test the Gigabyte X570 Master, .... so there doesn't seem to be such problems. There have also been comparisons with the Impact and the Master, and the same CPU runs much better on the Gigabyte X570 Master Edited January 17, 2021 by mahaudi Quote
unityofsaints Posted January 18, 2021 Posted January 18, 2021 6 hours ago, mahaudi said: First Run 5950x on Impact / Bios 3101 with IF 1400 Mhz goes ~ - 185°c.... after than I have many problems. Tested everything ... all the time ,...I have CB @ ~ - 130°c and cbb with - 122°c F**k A hours later the Set/CPU goes best with IF 1900. ?? Yes... IF 1900 Mhz 1:1 3800 Mhz RAM. But I have CB @ ~ - 152°c and cbb @ - 142°c. https://hwbot.org/submission/4658392_mahaudi_cinebench___r20_ryzen_9_5950x_14473_marks Tested with LN2 Jumper ON and OFF. Nothing helps. ...the same...... As if it wouldn't work Teste many IF Settings.... nothing helps . ? I've heard this behavior a few times on the Asus Boards. Apparently they just want to bring the Dark Hero to the front under LN2. Maybe I will test the Gigabyte X570 Master, .... so there doesn't seem to be such problems. There have also been comparisons with the Impact and the Master, and the same CPU runs much better on the Gigabyte X570 Master That pretty much matches my experience. Quote
noizemaker Posted January 21, 2021 Posted January 21, 2021 Version 3202 Beta Version 2021/01/14 20.4 MBytes ROG CROSSHAIR VIII DARK HERO BIOS 3202 1. Update AMD AM4 AGESA V2 PI 1.2.0.0 2. This Beta BIOS can only be reversed by BIOS Flashback. Before running the BIOS Flashback tool, please rename the BIOS file (C8DH.CAP) using BIOSRenamerhttps://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR_VIII_DARK_HERO/ROG-CROSSHAIR-VIII-DARK-HERO-ASUS-3202.ZIP -- Version 3202 Beta Version 2021/01/14 20.24 MBytes ROG CROSSHAIR VIII IMPACT BIOS 3202 1. Update AMD AM4 AGESA V2 PI 1.2.0.0 2. This Beta BIOS can only be reversed by BIOS Flashback. Before running the BIOS Flashback tool, please rename the BIOS file (C8I.CAP) using BIOSRenamerhttps://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR_VIII_IMPACT/ROG-CROSSHAIR-VIII-IMPACT-ASUS-3202.ZIP Quote
darkgregor Posted January 22, 2021 Posted January 22, 2021 did someone have ROG CROSSHAIR VIII IMPACT BIOS 3001 Version ? Quote
mahaudi Posted January 22, 2021 Posted January 22, 2021 It would be nice to have a BIOS that works properly under LN2 2 Quote
Alex@ro Posted January 22, 2021 Posted January 22, 2021 1 hour ago, mahaudi said: It would be nice to have a BIOS that works properly under LN2 I think that's your cpu to blame, i had cpu's that did the same as you describred, and others worked fullpot flawless, did you test the cpu on other board to see if it's specifically board issue or cpu behaviour? 1 Quote
mahaudi Posted January 22, 2021 Posted January 22, 2021 (edited) No not yet I was only told that some of them had the same problems on the Impact ... then immediately afterwards the same CPU was tested on a Gigabyte X570 Master and these problems were not the case Edited January 22, 2021 by mahaudi Quote
Alex@ro Posted January 24, 2021 Posted January 24, 2021 Please do test, unless we have a specific and tried situation we cannot ask Asus to fix if we don't know for sure it's an issue.... 1 Quote
5erveD Posted January 30, 2021 Posted January 30, 2021 (edited) I am having some weird behaviour with the last bios ( 3201 ) Board seem to get stuck on 02. After flashing back to 2701 it was gone. Later flashed 3201 again and was able to run it without problems and ran some fclk 2000/4000 mem test. Tested mem for about 4 or 5 days to see the 02 postcode get back. Going to try the most recent bios now and I do see that Asus has removed the 3202 from the official site. So this might have been fixed.New bios 3204 Anyone else experienced troubles with 3201 ? Or any problems with the most recent bios ? Edit: Tried 3204. Still stuck 02. Reverting back to 3003.... Edit 2: 3003. same shit.... Tried 2702. You guessed it. No Joy. Gonna run something else.... Edit 48726. I am such a Nub. ? It was the display cable at the back of the monitor which wasn't fully connected.... Edited January 31, 2021 by 5erveD 3 1 Quote
5erveD Posted February 5, 2021 Posted February 5, 2021 Ran 3204 for a few days now. Anyone experienced trouble with the ln2 jumper resulting in a instant 92 postcode ? Quote
OClockDoc Posted February 8, 2021 Posted February 8, 2021 (edited) On 2/5/2021 at 10:26 PM, 5erveD said: Ran 3204 for a few days now. Anyone experienced trouble with the ln2 jumper resulting in a instant 92 postcode ? It is too much VDDG_CCD, according to my experience. My CPU does not work above 1.13V. Does not matter with LN2 or normal mode. If i set it manually to 1.2V in Win it always will be equal to VSoc. Otherwise board works as expected on cold: Edited February 8, 2021 by OClockDoc 3 Quote
5erveD Posted February 8, 2021 Posted February 8, 2021 (edited) @OClockDoc Cheers! Will check it out. Nice score btw ? Edit: Works as intended! Edited February 9, 2021 by 5erveD Quote
GtiJason Posted February 10, 2021 Posted February 10, 2021 On 2/8/2021 at 1:05 PM, 5erveD said: @OClockDoc Cheers! Will check it out. Nice score btw ? Edit: Works as intended! Finally getting around to testing my Dark and "02" after first "F5" load optimized defaults on ship bios of 2503 I think 1 Quote
subaruwrc Posted February 25, 2021 Posted February 25, 2021 what is the trick to run 5950x + dark hero + w7 64 to have usb working? tried the above linked methods but board still not recognizes usb ports. same OS works fine on a B550 board ... 1 Quote
Rauf Posted February 25, 2021 Posted February 25, 2021 I think I used these drivers: https://www.win-raid.com/t4960f52-Solution-Win-Drivers-for-USB-Controllers-of-new-AMD-Chipset-Systems.html Or at least some drivers I found on winraid. 2 Quote
subaruwrc Posted February 25, 2021 Posted February 25, 2021 1 hour ago, Rauf said: I think I used these drivers: https://www.win-raid.com/t4960f52-Solution-Win-Drivers-for-USB-Controllers-of-new-AMD-Chipset-Systems.html Or at least some drivers I found on winraid. tried this but not working. Seems I overlook something. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.