Jump to content
HWBOT Community Forums

Recommended Posts

Guest Bullant
Posted

Yeah for 32m they will need lot tighter trcd-trp to compete with b die and that's not talking trfc yet,I really hope they are good tho

Guest Bullant
Posted

Yeah mate agreed was nice jump with those timings

Guest Bullant
Posted

Some more AFR,cpu ss and memory air...will test these on ln2 later next month

 

uu.png

Posted
Some more AFR,cpu ss and memory air...will test these on ln2 later next month

 

uu.png

 

what v? I got binned afr that are fun, havent tried them out on mocf yet

Guest Bullant
Posted
what v? I got binned afr that are fun, havent tried them out on mocf yet

 

This is 1.82v bios,yeah you should test yours out in the ocfm,strong board.Ill post ln2 results with them later next month ,xtu,32m

Posted

Thank you very much for the guide and all the additional information, knowledge from all. :)

Thank you again for the awesome guide Allen! (also thanks to everyone who's shared excellent, supplemental info!)

 

Been playing with a 6320 on this board. Haven't learned or tested nearly enough but wanted to check here on something. Been going after 742 XTU (prior owner of the cpu got it so I know it works). Talk about frustrating! Min/max/avg result over the last 20 runs is 738/741/739.7.

 

Is there any way to adjust bclk in smaller increments? The difference between 102.9375 and 102.9999 seems humongous atm.

All the best. :)

With Z170 OCF, I am getting 739 mostly, sometimes 740. Not seen 741 yet. And sometimes 738.:(

Hopefully will get 742 in this lifetime itself. :P

 

Will get Z170MOCF. Not available locally, so will have to try from newegg or something. :)

Posted

 

Will get Z170MOCF. Not available locally, so will have to try from newegg or something. :)

 

Sold OCF to a friend jeje just to purchase the mOCF myself. Only option is Newegg + forwarding address.

 

Enviado desde mi A0001 mediante Tapatalk

 

 

Superbiiz had 4 left in stock about a week ago after i called and bought one. Their site says they still have stock. Might be worth calling to find out. Price is pretty good there too.

Posted
Superbiiz had 4 left in stock about a week ago after i called and bought one. Their site says they still have stock. Might be worth calling to find out. Price is pretty good there too.

Thanks. I already bought it at Newegg. Will have it here on tuesday :).

 

Looking forward to reach XTU 742 @ 6320.

 

Enviado desde mi A0001 mediante Tapatalk

Posted
Thanks! But does it have anything equal to pll termination on asus? It is crucial for some cpus...
It does, it's called cpu cold bug killer voltage in the Asrock bios and as Allen has stated start at around 2.2v and slowly work your way up until cb is non existent.

 

I had to adjust cpu vccpll along with the above for the i3 6300 the other night but once you get these volts dialed in it's smooth sailing after that.

I think, judging the voltage on Allen guide, asrock vs asus should be:

 

1.65 CPU PLL Voltage -> PLL Termination on Asus

1.4 VCCPLL -> CPU Standby on Asus

2.22vColdBugKillerVolt -> Core PLL on Asus

 

BTW Some one can help me to have one LiL Yellow for me in EU Italy? I can't find any...

 

...

Posted

1.65 CPU PLL Voltage -> PLL Termination on Asus +CPU Standby on Asus

1.4 VCCPLL -> ASUS PLL bandwidth . level 6 = 2.8volt , i suggest keep 1.4volt unless you cpu need high to avoid cold bug.

2.22vColdBugKillerVolt -> Core PLL on Asus

  • 2 weeks later...
Posted

Retested best dual core tonight, chip ran exactly the same as last time until I got the crack (using Gelid GC Extreme, ran out of Grizzly).

 

9giEv7i.png

 

9LiKWiU.png

 

Need to figure out efficiency fail, on this OS or just roll a freshy.

 

RqytxNn.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...