SparkysAdventure Posted November 4, 2018 Share Posted November 4, 2018 Would it be possible to go 4k12 or beyond with bclk instead of a higher divider? Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted November 4, 2018 Administrators Share Posted November 4, 2018 Should work with a good kit Quote Link to comment Share on other sites More sharing options...
DR4G00N Posted November 4, 2018 Share Posted November 4, 2018 1 hour ago, AutisticChris said: Would it be possible to go 4k12 or beyond with bclk instead of a higher divider? Yes, that's what I need to do with my kit on water, boot 4k 12-11 and then bump it up to 4133 in the OS. Once the mems get a little chilly when running dice the 4133 setting starts to work, then the mems can be bumped up to 4200-4250. 1 1 Quote Link to comment Share on other sites More sharing options...
SparkysAdventure Posted November 5, 2018 Share Posted November 5, 2018 (edited) @DR4G00N PMing on something somewhat related. I'm hopefully starting dry ice overclocking soon. Edited November 5, 2018 by AutisticChris Quote Link to comment Share on other sites More sharing options...
superV Posted November 5, 2018 Share Posted November 5, 2018 is it possible to update the bios of the ASROCK Z170 OC FORMULA via usb without a cpu installed? thanks Quote Link to comment Share on other sites More sharing options...
Synth Wave Posted November 8, 2018 Share Posted November 8, 2018 Is it possible to have a an ATX G Bios with TJ Max of 115 degrees? It is an option for the 9900k. Quote Link to comment Share on other sites More sharing options...
bigblock990 Posted November 8, 2018 Share Posted November 8, 2018 1 hour ago, Synth Wave said: Is it possible to have a an ATX G Bios with TJ Max of 115 degrees? It is an option for the 9900k. Please stop spamming your request in this thread. Check out z390 taichi ultimate or phantom gaming 9 if you need a full ATX mobo for 9900k. 1 Quote Link to comment Share on other sites More sharing options...
Synth Wave Posted November 8, 2018 Share Posted November 8, 2018 3 hours ago, bigblock990 said: Please stop spamming your request in this thread. Check out z390 taichi ultimate or phantom gaming 9 if you need a full ATX mobo for 9900k. Is the Z390 Taichi Ultimate compatible with Windows 7? Quote Link to comment Share on other sites More sharing options...
Achill3uS Posted November 9, 2018 Share Posted November 9, 2018 (edited) Officially non of the z390 supports win7, not even microsoft does anymore but you can find results made with both boards on w7, so doable if im not wrong. Guys Formula Drive ver:3.0.94 works fine for you with 8 core on w7? For me multi can be changed only downwards, not changing on the way up, anybody has same issue? Edited November 9, 2018 by Achill3uS 1 Quote Link to comment Share on other sites More sharing options...
bigblock990 Posted November 9, 2018 Share Posted November 9, 2018 13 hours ago, Synth Wave said: Is the Z390 Taichi Ultimate compatible with Windows 7? Like achill3us mentioned, its not officially supported but yes win7 does work with both mobo's I listed. 2 hours ago, Achill3uS said: Officially non of the z390 supports win7, not even microsoft does anymore but you can find results made with both boards on w7, so doable if im not wrong. Guys Formula Drive ver:3.0.94 works fine for you with 8 core on w7? For me multi can be changed only downwards, not changing on the way up, anybody has same issue? For mocf with 6c/8c you need to use AFD 3.0.209.1, everything is working properly on all OS with that version. See link from splave below On 4/12/2018 at 6:31 AM, Splave said: http://picx.xfastest.com/nickshih/asrock/AFDSetup(v3.0.209.1).rar 2 1 Quote Link to comment Share on other sites More sharing options...
Synth Wave Posted November 11, 2018 Share Posted November 11, 2018 On 11/9/2018 at 6:18 AM, Achill3uS said: Officially non of the z390 supports win7, not even microsoft does anymore but you can find results made with both boards on w7, so doable if im not wrong. Guys Formula Drive ver:3.0.94 works fine for you with 8 core on w7? For me multi can be changed only downwards, not changing on the way up, anybody has same issue? You need to install a USB card for Z390. 2 Quote Link to comment Share on other sites More sharing options...
arnavvr Posted November 12, 2018 Share Posted November 12, 2018 Has anyone tested this mod with an ASUS M8i with either the 8700K or 9900K? 1 Quote Link to comment Share on other sites More sharing options...
MaddMutt Posted November 15, 2018 Share Posted November 15, 2018 I have a question that has not been answered by KPC yet. I do not feel that it's their fault as they must first either get the board and verify a problem or ask several owners to verify if there is a problem. I currently own 2 ASRock Z170 OCF motherboards and have one setup for Dice benching. I purchased the motherboards during the Team Competition 2018 a few months ago. The Motherboards are Rev 1.03. I have a problem with mounting my older KPC F1 Dark and I hope someone else has been able to find a simple solution. I installed the F1 Dark for my benching of my i3-6320 for the Team Cup. While installing the Back Plate/Rods through the mounting holes, it did not want to line up. The back plate did not slide smoothly during installation nor sit flush with the motherboard. I had the feeling that if I tightened the screws on the Hold Down Plate that I would crack or break the motherboard. I would gladly buy the "New Mounting Hardware" at KPC if this would solve my problem. Other than the AM4 compatibility, it looks identical to the one I have. Is it just me being to cautious on properly mounting my F1?? Would it be easier to just purchased a New Cooler from KPC?? Thank You For Your Time And Assistance 1 Quote Link to comment Share on other sites More sharing options...
yosarianilives Posted November 15, 2018 Share Posted November 15, 2018 1 hour ago, MaddMutt said: I have a question that has not been answered by KPC yet. I do not feel that it's their fault as they must first either get the board and verify a problem or ask several owners to verify if there is a problem. I currently own 2 ASRock Z170 OCF motherboards and have one setup for Dice benching. I purchased the motherboards during the Team Competition 2018 a few months ago. The Motherboards are Rev 1.03. I have a problem with mounting my older KPC F1 Dark and I hope someone else has been able to find a simple solution. I installed the F1 Dark for my benching of my i3-6320 for the Team Cup. While installing the Back Plate/Rods through the mounting holes, it did not want to line up. The back plate did not slide smoothly during installation nor sit flush with the motherboard. I had the feeling that if I tightened the screws on the Hold Down Plate that I would crack or break the motherboard. I would gladly buy the "New Mounting Hardware" at KPC if this would solve my problem. Other than the AM4 compatibility, it looks identical to the one I have. Is it just me being to cautious on properly mounting my F1?? Would it be easier to just purchased a New Cooler from KPC?? Thank You For Your Time And Assistance Which set of holes did you try? For lga 115x it shouldn't be the same hole in every corner. 1 Quote Link to comment Share on other sites More sharing options...
MetalRacer Posted November 15, 2018 Share Posted November 15, 2018 3 hours ago, MaddMutt said: I have a question that has not been answered by KPC yet. I do not feel that it's their fault as they must first either get the board and verify a problem or ask several owners to verify if there is a problem. I currently own 2 ASRock Z170 OCF motherboards and have one setup for Dice benching. I purchased the motherboards during the Team Competition 2018 a few months ago. The Motherboards are Rev 1.03. I have a problem with mounting my older KPC F1 Dark and I hope someone else has been able to find a simple solution. I installed the F1 Dark for my benching of my i3-6320 for the Team Cup. While installing the Back Plate/Rods through the mounting holes, it did not want to line up. The back plate did not slide smoothly during installation nor sit flush with the motherboard. I had the feeling that if I tightened the screws on the Hold Down Plate that I would crack or break the motherboard. I would gladly buy the "New Mounting Hardware" at KPC if this would solve my problem. Other than the AM4 compatibility, it looks identical to the one I have. Is it just me being to cautious on properly mounting my F1?? Would it be easier to just purchased a New Cooler from KPC?? Thank You For Your Time And Assistance This is the proper orientation for the back plate/rods. http://forum.kingpincooling.com/showthread.php?t=488 Quote Link to comment Share on other sites More sharing options...
oldirdey Posted November 16, 2018 Share Posted November 16, 2018 On 11/12/2018 at 6:47 AM, arnavvr said: Has anyone tested this mod with an ASUS M8i with either the 8700K or 9900K? With both CPU, 8700k is working, 9900k is not working. Post´s but freezes at bios splash screen. 1 Quote Link to comment Share on other sites More sharing options...
SparkysAdventure Posted November 18, 2018 Share Posted November 18, 2018 @oldirdey I might possibly know of a fix. PMing Quote Link to comment Share on other sites More sharing options...
MaddMutt Posted November 19, 2018 Share Posted November 19, 2018 Thank You M_R Quote Link to comment Share on other sites More sharing options...
sabishiihito Posted November 20, 2018 Share Posted November 20, 2018 Am I doing A2 right? lol 2 1 Quote Link to comment Share on other sites More sharing options...
Raabot Posted November 20, 2018 Share Posted November 20, 2018 (edited) On 10/10/2018 at 11:38 PM, Droidbot said: BIOS for Z170 OC Formula -- based off Nick's BIOS, modded by dsanke Changes: Added 906EC (Octa-core) microcode Updated iGPU vBIOS to 1059 and GOP to 9.0.1080 DSDT and CPU SSDT patched to support 16 thread Download: http://s000.tinyupload.com/?file_id=03237385439615534015 BIOS for Z170M OC Formula -- based off Nick's BIOS, also modded by dsanke Same changes as above. http://s000.tinyupload.com/?file_id=77370903885183324131 Hey guys, has anyone tried 9700k on Z170 ocf with this bios? Mine didn't work. The system won't boot. Can anyone help me out? Thanks! BS: my “me fw version” is 11.6.0.1126. Edited November 21, 2018 by Raabot 1 Quote Link to comment Share on other sites More sharing options...
Synth Wave Posted November 22, 2018 Share Posted November 22, 2018 On 11/20/2018 at 3:36 PM, Raabot said: Hey guys, has anyone tried 9700k on Z170 ocf with this bios? Mine didn't work. The system won't boot. Can anyone help me out? Thanks! BS: my “me fw version” is 11.6.0.1126. Did you do this to the CPU? If you have then you probably have to solder your motherboard. Quote Link to comment Share on other sites More sharing options...
DR4G00N Posted November 22, 2018 Share Posted November 22, 2018 (edited) Anyone try Coffee IGPU yet on this board? I was trying to use it yesterday but every time I installed the drivers it just gave a black screen. Edit: NVM, I think the IGPU is dead in my 8700K. 7350K's IGPU works fine. Edited November 23, 2018 by DR4G00N 1 Quote Link to comment Share on other sites More sharing options...
Raabot Posted November 22, 2018 Share Posted November 22, 2018 (edited) 23 hours ago, Synth Wave said: Did you do this to the CPU? If you have then you probably have to solder your motherboard. Yes, I did. I shorted the two pins with #2 pencil and isolate others with tapes. Is 9700k works on your Z170 OCF with this bios? I just want to know if the bios works or not before I do any soldering. Thanks! 11/23/18 updates: I tried the same protocol as before but this time I am using Nick's bios on Z170 OCF with 8700k and it worked! Edited November 23, 2018 by Raabot Quote Link to comment Share on other sites More sharing options...
Synth Wave Posted November 23, 2018 Share Posted November 23, 2018 17 hours ago, Raabot said: Yes, I did. I shorted the two pins with #2 pencil and isolate others with tapes. Is 9700k works on your Z170 OCF with this bios? I just want to know if the bios works or not before I do any soldering. Thanks! 11/23/18 updates: I tried the same protocol as before but this time I am using Nick's bios on Z170 OCF with 8700k and it worked! Can you try the 9700k with Nicks BIOS? Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted November 23, 2018 Share Posted November 23, 2018 On 11/20/2018 at 5:23 AM, sabishiihito said: Am I doing A2 right? lol really nice ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.