March 7, 20169 yr Why do you cut the plate in the size of the old one? It is necessary to heat spreader was the size of the PCB - would cover the corners. Those. should be a new heat spreader type of http://abload.de/image.php?img=imageidsya.jpeg but larger size It's elementary strength of materials. Lever arm, strength bending...
March 7, 20169 yr Is it not just easier to mount while ambient and warm to +60, then pull down? Not to put words in his mouth but I took it as him saying he does this after a crack, so running cold for a while and this is his method of re seating the thermal paste so he can keep benching
March 7, 20169 yr Why do you cut the plate in the size of the old one? It is necessary to heat spreader was the size of the PCB - would cover the corners. Those. should be a new heat spreader type of http://abload.de/image.php?img=imageidsya.jpeg but larger sizeIt's elementary strength of materials. Lever arm, strength bending... Because it's a first test only. I build that because i need more mass (atm ca. double weigt) ihs for my cascade. Other option for me was to make more mass evap... but that's not so easy for testing. _
March 7, 20169 yr Why do you cut the plate in the size of the old one? It is necessary to heat spreader was the size of the PCB - would cover the corners. Those. should be a new heat spreader type of http://abload.de/image.php?img=imageidsya.jpeg but larger sizeIt's elementary strength of materials. Lever arm, strength bending... A heat spreader the size of the PCB would definitely help prevent PCB bending--great idea!
March 7, 20169 yr Because it's a first test only. I build that because i need more mass (atm ca. double weigt) ihs for my cascade. Other option for me was to make more mass evap... but that's not so easy for testing. _ Your picture I showed an example. My main idea is to move the pressure points to the edge of (to the point of contact CPU PCB with the socket) Reducing the pressure on the center (CPU crystal) not the main, and of itself not solve the problem. In theory. I do not have subge a processor and guided only by a pictures deformed processors, logic, and knowledge of subject "strength of materials". Well, and the experience of working with similar problems. Edited March 7, 20169 yr by RomanLV
March 7, 20169 yr I know what you mean, i have myself a lot of other idea's to solve the prob, but not for public now.
March 7, 20169 yr Not to put words in his mouth but I took it as him saying he does this after a crack, so running cold for a while and this is his method of re seating the thermal paste so he can keep benching this Leeg you need use more TIM if heat up method doesnt work to fix it give this a try! Edited March 7, 20169 yr by Splave
March 7, 20169 yr this Leeg you need use more TIM if heat up method doesnt work to fix it give this a try! Time to buy stock in Thermal Grizzly
March 7, 20169 yr This goes against everything I understand about thermal paste. remember when it was just for filling the microscopic gaps?
March 7, 20169 yr So i think i do it right from the first. With big glop of paste my temp is much lower with custom water cooling. Now i just need GC Extreme (because no grizzly here).
March 7, 20169 yr this Leeg you need use more TIM if heat up method doesnt work to fix it give this a try! I've been using splaves paste metherd as well works great,full pot ever session with no crack
March 8, 20169 yr That's the funniest application of thermal paste I've seen. Remember all those article and forum threads where people discuss if you need a blop, a cross or a square? Nope, you need a pile of paste.
March 8, 20169 yr This goes against everything I understand about thermal paste. remember when it was just for filling the microscopic gaps? Yeah haha Now its more about "creating" more "connection" points between IHS and die so paste can handle the "stress" without cracking
March 10, 20169 yr I 0.15 is the last that fit easy....so i think that a tickness of 0.20 should be fine....but a metal tickness not as said wizerty in paper....paper is squeezable Sent from my E2353 using Tapatalk Edited March 10, 20169 yr by barbonenet
March 11, 20169 yr What about the gap in the glue which leaves a breathing hole for expanding and contracting of the paste and it's ingredients? I only assume that the hole which is there in the normal glue would be some sort of breathing gap for the natural movement of the tim. Just a wild guess tho. As for what I understand, all things expand and contract when put under hot or cold. So why wouldn't it be the same for the tim. And that could be the Kraken.
March 15, 20169 yr Hey Roman, what's up?? I send you one of my copper ihs for testing and till now not any response!? If you don't need it, pls send it back to me! _
March 17, 20169 yr From my test the spacer doesn't help the cracking stuff. Have you guys found something different? I have been using strips of electrical tape for months now and it never seems to be consistent. At one point no crack, same exact method next time and crack. But I have tried 4 strips on each side, I have also tried 2 pieces high on each side. I have also tried glueing the ihs back everytime and re-delidding. Then I will bench and think I fixed it and do the same thing again and it cracks. It's really strange and hard for me to figure out. I have also been using a lot of paste but not as much as splave showed. Will try that this weekend with new chip. I also tried with i3. delidded and glued back together with a little higher glue and a ton of paste and I had terrible cracks. Some of my best results have been cracking it on purpose and heating up with xtu and then benching more. its definitely the most frustrating thing I have come across since starting xoc.
March 18, 20169 yr Have an issue, hopefully someone has an idea what the **** is going on, cause I can't figure it out. So I recently delidded 2 chips using delid tool. Scraped glue off pcb and ihs with credit card, as I've done every chip in past. Re-timmed 6320 and ran without any issues. 2nd time I tried running 6320, mobo wouldn't boot. Fast forward to 2 weeks later, today. 2 different mobos. Both 6700k and 6320 will not post. Both look pristine without bend, scratch, or other defect. Multiple mountings and still no post. I've seen codes 14 and 00 on Gene and 04 on OCF. Multiple sticks and configurations of ram, cosm cleared dozen times, no post. Why would this be happening? Never had any issues like this before with delidded cpu. I even checked 1st skylake i bent and it boots no problem. So why would 2 chips using safe method, appear dead?? I'm at a loss.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.