April 6, 20197 yr USB BIOS Flashback - BIOSRenamer M10A.CAP TurboV works correctly Edited April 6, 20197 yr by GGI78
April 6, 20197 yr I wanted the modded 1801 to have HT enabled , with EZ Flash didn't work for me no matter the extension used but I will try the flashback method. Now question for those experienced , for M10A I have to rename the BIOS to a specific extension or leave it as it is ? Also , do I have to remove completely every other hardware from the mainboard and unplug everything ? When I did the flashback for M9A I only plugged the PSU and started the flash. Thanks again for your answers.
April 6, 20197 yr 39 minutes ago, err0r said: I wanted the modded 1801 to have HT enabled , with EZ Flash didn't work for me no matter the extension used but I will try the flashback method. Now question for those experienced , for M10A I have to rename the BIOS to a specific extension or leave it as it is ? Also , do I have to remove completely every other hardware from the mainboard and unplug everything ? When I did the flashback for M9A I only plugged the PSU and started the flash. Thanks again for your answers. Just use the correct port (there is one tied to the flashback feature) and press the flashback button for like 3-4 sec. It should start blinking afterwards for several minutes (button, flash drive and bios led iirc) Oh and before that; make sure that the file is named M10A.CAP (you can rename it yourself).
April 6, 20197 yr @FireKillerGR Thanks , it worked. I didn't remove any hardware , only shutdown and press the flashback. I even restored an XP image that I got from suzuki to an old Intel 60Gb SSD , it is working (partially) but I need drivers compatible with XP for the mainboard and my graphic card is a GTX 1080 and afaik there is none. I tried to launch DriverPackSolution but couldn't start it , any ideas ?
April 6, 20197 yr XP support is only really for running 2D benchmarks like SuperPi. Most of the hardware manufacturers stopped making drivers for XP years ago.
April 8, 20197 yr 8 hours ago, MetalRacer said: Do these modded BIOS add an ACPI setting? yes its what Elmor did for the 1703 one Edited April 8, 20197 yr by FireKillerGR
April 9, 20197 yr 19 hours ago, FireKillerGR said: yes its what Elmor did for the 1703 one Thanks got it sorted out.
April 13, 20197 yr On 4/8/2019 at 2:54 AM, FireKillerGR said: yes its what Elmor did for the 1703 one EDIT by Gti, 1704 I think lol How about after Comp in your free time you make unicorn bios. M10A 1801 modded for XP and add LN2 volts/IGP and M9A compatibility. I'm modding the 2 bios you just posted (M10A_1801_XP, M10A_0001_XP) for M9A. Will try to test tonight and post em in that thread if they are solid Edited April 13, 20197 yr by GtiJason
April 13, 20196 yr On 4/6/2019 at 8:59 PM, GGI78 said: USB BIOS Flashback - BIOSRenamer M10A.CAP 16 MB · 11 downloads TurboV works correctly Seriously I dont know how turbov works for you, tried lot of things with this bios and still same like with 1704 modbios. not possible to raise cpu multi. (thanks for the reply in PM, tried 1.02.02 as well, same result) Edited April 13, 20196 yr by Achill3uS
April 15, 20196 yr On 4/13/2019 at 6:09 AM, GtiJason said: How about after Comp in your free time you make unicorn bios. M10A 1801 modded for XP and add LN2 volts/IGP and M9A compatibility. I'm modding the 2 bios you just posted (M10A_1801_XP, M10A_0001_XP) for M9A. Will try to test tonight and post em in that thread if they are solid issue is that I dont know what part affects the ln2 volts + IGP as this was from ASUS Might check tho just for fun ^^
April 21, 20196 yr Is the 1801 modded bios with xp support better in eff. then the 1704 with xp support ? As for the turboV issue. Just set to multi in bios to 75 and start with slowmode. In os downclock using TurboV and flip slowmode off. Works for me.
April 21, 20196 yr Crew Not sure someone asked, but can 1801 run i7-8xxx 4133c12+? A lot of people including me had quite big trouble tp POST this with older cfl gen but i9 gen could do P.S. Testing for 2k or having to use Impact is no fun
April 21, 20196 yr I flashed the new BIOS 1901, really help oc on the ram... running Corsair 3600MHz OC'ed to 4000MHz 18-18-18-36 at 1.38v sub https://hwbot.org/submission/4135227_techjesse_3dmark2001_se_2x_geforce_gtx_980_ti_121990_marks
April 23, 20196 yr On 4/21/2019 at 4:24 PM, websmile said: Not sure someone asked, but can 1801 run i7-8xxx 4133c12+? A lot of people including me had quite big trouble tp POST this with older cfl gen but i9 gen could do P.S. Testing for 2k or having to use Impact is no fun Apex X bios 1801 ported to Apex IX with i7-8700k 4133+ is no problem
July 23, 20196 yr anyone having issues with mem ocing on bios ver 2003? 4kc12 even with auto rtls stopping on 4F.
July 30, 20196 yr Hello I'm not on the right track, butis it interesting to change bios for my X hero (1704) for the 9900KF? I found a 9900KF not too bad. tank you
November 24, 20196 yr Everyone Hello Which will the latest MOD BIOS of this motherboard be? I'd like to use Windows xp and carry out SUPERPI.
November 25, 20196 yr On 7/23/2019 at 11:07 AM, Evasion said: anyone having issues with mem ocing on bios ver 2003? 4kc12 even with auto rtls stopping on 4F. Yes I had something similar happen. 2102 was better, not sure about 2203 yet.
December 10, 20196 yr i have tried various bios and keep going back to 1003 for memory it has been the best for me.
February 27, 20206 yr I get improper bios file when i try to go back to 1301 bios from 1901. running a 8700k NVM Edited February 27, 20206 yr by lilchronic
May 23, 20205 yr Anyone try A2 RAM on this board? I really struggled above 4000. Edited May 23, 20205 yr by unityofsaints
July 23, 20205 yr Any possibility of backporting trace centering and other z390 apex features back to the z370 bios?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.