Benchmark software

Hello, I need help because my different programs are reporting different core voltages and I'm not sure if I'm hurting my cpu in any way and I need help figuring out my actual core voltage. HWinfo shows my core voltage at 1.4 ish while in ryzen master it is at 1.1 and different software keeps reporting different things. Also, my core VID shows 1.1 in HWinfo while my core voltage shows 1.4 Whats the difference? (sorry I'm a noob).

Edit: I found the Error: I was using an old .dll, wich was way slower Hello! Windows XP should be faster than Windows 7 in wPrime. So far I have tested 4 different Versions of XP: 2 are stripped down, XP Service Pack 2 and XP Service Pack 3 All of them perform significally worse than Windows 7. Setup is i7 860 @ 4.5GHz Win 7 --> 5,505sec for 32m Win XP --> 6,593sec for 32m I have tried with and without Drivers for GPU and Chipset, but only small differences Themes ON/OFF Can somebody help me?

I tried 3DMark11 on a completely stock speed system before any overclocking and I'm getting an error message. 3DMark11 run correctly through all the tests then keeps giving this error at the end: "hexadecimal value 0x00, is an invalid character" 3DMark support says its an issue with 3DMark system info. I uninstalled Futuremakr System Info, rebooted, downloaded the latest version of system info, installed it, then rebooted and I still get the same issue. After it was uninstalled, I checked and everything related to Futuremark was removed from the appdata folder. It worked fine a few months ago on the same system, and now it doesn't work. Any other suggestion…

Everyone, hello. While my score is calculation for some reason, the time moves slightly. When thinking a change in about 14 seconds, it's of more than 20 seconds. When the passage other persons are calculating is seen, there is no blurring, but 、、、. Are there any fatal problems? Please take care above.

Does anyone have any efficiency tweaks for cinebench to share? I've been rerunning all day and even with a higher oc I can at best match the score of someone with a lower OC so obviously something is messed up with my efficiency. Does anyone have any favorite tips or tweaks that they like to run for the maximum pts in cinebench?

I would like to ask if there is a difference amonge 9900k P0 and R0 in performance. I trying to bench wprime1024 with 9900k @ 5.6 and get at best 63sec... I can see at submissions many scores at 5.45-5.6GHz that get scores ~57sec and all are P0's With 7350k @5.6 I get 3.48s -> 57s if it was 8c With 7700k@5.6 I get 1.55s -> 57.5s if it was 8c So the OS I bench is not the problem I believe No difference in goupi1B or CBr15 but huge difference in wprime. I use win7 64bit, diagnostic mode, no GUI, best performance, kill explorer but no luck. Do you have any idea? Same scores in win10 also Thanks

I did some experimenting with single rank v. dual rank memory in Time Spy and thought I would share my results here. Setup: 10900k at 5.3 core/4.7 ring XII Apex Single rank kit- Team Group 8-pack 4500cl18 xtreems Dual rank kit- G. Skill Trident Z 32gb 3200 cl14 Testing methodology: I used Time Spy cpu run only to compare results, and used the cpu score to measure gain in performance for each timing. I used maxmem to reduce the 16gb down to 5gb, and from 32gb to 10.4gb. For memory timings I used flat primaries with tRAS=tCL+rRCD(RD)+2, tWL= CL-2, tRDRD_dg and tWRWR_dg at 4, maximus tweak mode 2, and used 1t for all of the single rank timi…

Clean Win XP SP3 or Win 7 SP1 instals. Config: ASRock 775i65G R3.0 (Intel 865G) - Noctua NH-C12P SE14 Core 2 X6800 Extreme 2.93GHz @ 3414MHz (285x12) 1.296Vcore 2x 1024MB OCZP4001G 2-3-2-5 190MHz 2.75V PNY 6800 GT AGP 256MB DDR3 350/500 @ 400/559MHz 1024G Western Digital Black 64MB cache (WD1003FZEX) 240G SanDisk Extreme PRO (SDSSDXPS-240G) DVD-RW Samsung SH-224DB Powered by eVGA Supernova G2 850W HWbot Unique Heaven benchmark fail to start Unique Heaven fail to work ... It should be noted, however, that on Win 7 x64 Unique Heaven does work standalone. Just when I press "Benchmark", then it show white letters "Benchmarking..." on the scr…

Hi I have a problem with the gfxbench. After installation and opening the benchmark it has an error saying I have to log in and use my password. Network error. I allready have had the problem on two different systems and don t know how to solve this. Am thankful for any solutions.

I know it's gonna be a while similar to Port royal with everything going on with the site, but haven't seen anyone bring it up so let's not forget to put the Vrmark Android tests on the list of benches to add, Amber, Purple, and Indigo room tests respectively.

I'm having a lot of problems lately with the latest system info from futuremark / UL while trying to run Time Spy and Firestrike benchmarks. Using latest 3DMark software and updated + latest system info 5.26 ( 4 months old ? ) . I need some help to solve this problem. It goes like this. While trying to run Time Spy or Firestrike on windows 10 1909 latest and updated on stock setting on cpu and gpus the 3DMark benchmarks will take between 15 ~ 25 minutes to finish system info scan , yes you heard that correctly 25 minutes to wait for system info to finish scanning and then the benchmark will start and run but cannot get a valid score as it always comes up with some ge…

hi I get this error message when installing 3dm11 on win7 la signature temporelle et/ou le certificat n'a pas pu etre verifié ou est incorrectement formaté. the time signature and/or certificate could not be verified or is incorrectly formatted. if anyone has any ideas?

Morning gents , i'm back after a couple of years of no benching. I'm having trouble getting 3 or 4 gpus ( rx 590 ) in crossfire to scale in firestrike , i took a look at the monitoring part built in the benchmark and i saw a drop of gpus usage from 100% to 40% on parts of gt1 and gt2 ? it happens with 3 or 4 gpus on windows 7 , score it's half of where it should be as i'm getting 15k instead of ~30k. Any ideas , trick or tips how to get them to scale and work 100% thru the whole gt1 and gt2 test ? I have no problems in none of the other hard gpu benchies , Timespy scores correctly and Vantage to name some. Any help would be greatly appreciate it as i'm pulling my white ha…

I have a clean install of the latest version Windows 7. I can run the HEVC in absolute mode when using my 7640x. However when i put my 9960x in the same motherboard and dont change anything except Windows recognizing its a new processor and thus updates the basic core internals it impossible to run the same bencher in Absolute mode. If i do exactly the same change in Windows 10 then there is no issue. Is there thus either incompatibility with Win 7 and the 9960x processors or is there a specific trick to get it to work?

Is cloudgate gone for good or is it possible to download it from somewhere else.

Hi, Does anyone have the Mediaplayer 9 and the encoder PCMark04 is asking for especially the x64 version. I can see now that on Microsoft all such files are gone. Just trying to run some old hardware since we can seemingly get points on that benchmark.

Hey guys I just wanted to ask why Port Royal is not listet in the 3dmark benchmark list? I am just wondering because its a frequent benchmark with really much attention from Pro overcklockers like @Luumi who broke the 13 record or @Splave who held the WR with his Titan for a long time. Also Kingping and Steponz gave the benchmark quite the attention with their livestreams. I thought it would be nive if Port Royal would be addet to the list of benchmarks.

I have been benching some old system (mostly 486 and early Pentium) and I have been having serious issues with wPrime. No matter what I do wPrimes cheat detection system seem is being triggered around midnight. I have experimented with with different settings for the system (cache/system/memory timings; over/underclocking etc), but no matter what I do the anti-cheating system still gives me false positives. Could someone please help me out?

When ever I try to upload my cvf files to the validator I get this "Corrupted or missing CVF (Code: 5) " It isn't a problem with stability I could run wprime at 4.9 but can not validate at 4.5 so I am not sure what is going on. Hardware used MOBO: re CPU: 2180 cooling: cascade Edit just tried on my laptop and it also does not work and it is bone stock.

Hey guys, does anyone know how to get 3dmark 99 working on windows xp? I have tried the compatability to windows 98/me, it does not launch but there is an active process for it. I have looked around alot of forums and people are talking about how this version does not work on XP but there is a fix to download but all of the links are now dead. i possibly found the fix but after applying said "fix" when trying to start 3d mark it says to use a 3d accelerator that is capable of using textures, this is while i have a hd 3870 in the system and latest drivers for xp. I havent tested another card yet as its 3:15 am and im going to bed. I want to run the benchmark on XP a…

I'd like to invite all active benchmark developers to discuss integration into BenchMate. If you have any technical questions about BenchMate or the integration, please feel free to ask here. In general there are two ways of integration: 1) External Integration A DLL is injected into the benchmark's process and all of its child processes. Several WIN32 and CRT functions are hooked as needed to inject accurate timing and file integrity hashing as well as result capturing. 2) SDK integration One of the next releases will bring native BenchMate integration. The SDK will be available for C/C++ first as a static library. There will be several classes a…

When i buy a Steam 3DMark Key.. do i have to install Steam on every System before i can run 3DMarks with a Steam Key or how does it work?

I will be installing Windows 7 on a few PCs over the next couple of weeks, for GPU benching. Is there a way to trick it into getting updates, or does anyone know of a resource to download essential updates beyond SP1?

I spent several hours finding my fastest stable overclock for GPUPI 3.3.3, only to find when trying to upload my result that it needs exactly version 3.3 https://www.overclockers.at/news/gpupi-international-support-thread only has 3.3.2 and 3.3.3. It doesn't have 3.3 any more. This site only accepts 3.3 Can anyone provide me with a link to download the version that hwbot accepts, given that the provided link only has older and newer versions? Thanks