Jump to content
HWBOT Community Forums

Recommended Posts

Hmm, Apex XI is available in europe, you can order and get the board in two days in germany - and I tested it and it is quite impressive

  • Thanks 1
  • Confused 1

Share this post


Link to post
Share on other sites
4 hours ago, websmile said:

Hmm, Apex XI is available in europe, you can order and get the board in two days in germany - and I tested it and it is quite impressive

link please?

Share this post


Link to post
Share on other sites
On 12/25/2018 at 8:58 PM, Alex@ro said:

The new Geekbench standard for B-die DDR4-4860 14-14-14-28-2T all air . Voltage tolerance is needed for sticks, DDR4-4800+ requires 2.00V on this particular set. For comparison, at same voltage and temperature the kit does DDR4-4260 12-12-12 but as always YMMV

 

snaphsot00165oe0x.png

 

 

When dealing with 7F code trcd is too tight, on my setup 1T is good for 4600, over 2T is needed. Use maximus tweak1, tcwl 14 twrrd_sg 26 twrrd_dg 20, rest similar to standard 4000C12 more or less personal tweaking. When air or water use manual system agent 1.40-1.50 or more depending on imc, auto is 1.70 for 4800 and you might not feel safe :D 

Forgot to post mine with random 4133 retail kit 😛

GB3.jpg

  • Like 1

Share this post


Link to post
Share on other sites
16 hours ago, websmile said:

Can it do 4266c12? Or 4133?

4133 is ok but no boot at 4200/4266 with different secondary and tertiary

  • Like 1

Share this post


Link to post
Share on other sites

Doesnt it make you suspicious you have 2050 and 9k, and when you go to 2110 you have maybe 9500 at best at same timings, which is around 500 more, and that when you go from 2390 to 2450 you suddenly have around 10400? which is above 1k more even though you gained alot less frequency percentual and same in real frequency?? Not my business anymore after I quit benching but I think this is quite obvious to see together with other funny things, especially when you know benchmarks usually have baselines and it is percetage above baseline gain that makes the results.

  • Like 1

Share this post


Link to post
Share on other sites
8 minutes ago, websmile said:

Doesnt it make you suspicious you have 2050 and 9k, and when you go to 2110 you have maybe 9500 at best at same timings, which is around 500 more, and that when you go from 2390 to 2450 you suddenly have around 10400? which is above 1k more even though you gained alot less frequency percentual and same in real frequency?? Not my business anymore after I quit benching but I think this is quite obvious to see together with other funny things, especially when you know benchmarks usually have baselines and it is percetage above baseline gain that makes the results.

I thought it was because one of the gb3 subtests massively favours bandwidth, and is weighed heavily enough in the overall score that pushing that high gives you a better score overall even if you lose score in other subtests? (but I could be wrong as I've not tested myself)

  • Like 2

Share this post


Link to post
Share on other sites

The mem sream copy value explodes - but only at multicore, it is more or less same at single core at 4133c12 vs 4800c14. This is what makes me a bit nervous, but tbh for me it is a solely academical problem because gb3 is still vlauable tool for me to test memory stability for benching, results do not matter on this

 

P.S. Nearly forgot, @Doc.Brown many thanks for the spi32m test, very interesting :)

  • Like 2

Share this post


Link to post
Share on other sites

Well it's not my memory profile for 10k4 GB3 score on the 4772C14 screen,for me it's like George says an bandwidth story for this memory test.Perhaps it could be interesting to only compare GB3 and Aida memory test by 200mhz steps to see the impact of the bandwidth on both and if it scale the same ... don't know

  • Like 1

Share this post


Link to post
Share on other sites

I noticed the same, 4800c14 slower than 4133 c12 in everything except geekbench. Comparing screenshots it looks like the latency is the only thing better at tight timings therefore it should have the most importance for physics,32m etc

  • Like 1

Share this post


Link to post
Share on other sites

Does Maximus XI gene (Z390) can overclock ddr4 to more MHz than Maximus X apex (Z370) ?

(both pair with the same 9900K cpu and same g.skill ram stick.)

  • Like 1

Share this post


Link to post
Share on other sites

0802 bios it’s really good with A1 Layout.

Anyone else tryed it ?

 

411DDDA5-103F-453F-AC7D-8AF239A225C0.jpeg

  • Like 2

Share this post


Link to post
Share on other sites

Has anyone got any idea how to eliminate cold bug and cold boot bug on 9900k on Maximus Gene XI ? 

 

I spent 35L of LN2 yesterday and got me max oc of 6.1Ghz @ 1.58v on my 9900k , but this cpu 9900k seems that have a nasty cold bug exactly at -112c and also a cold boot bug at -89c on MGeneXI on Bios 0057. LN2 mode enable and also the RSVD switch. I have tried everything possible but the cold bug wont go away : tried absolutely every range of voltages everywhere trying to figure it out but i could never find the voltages to get rid of the cold bug. Any idea or guidance/help will be greatly appreciate it @Alex@ro . 

Kind Regards: Angelo

  • Like 1

Share this post


Link to post
Share on other sites

Is there any chance the 4200 divider on memory will work c12 in the future? I tested this with two different cpus (8086k and 8600k), different settings and it did not work on apex xi, plus I talked to a couple of people using gene with same problem. Tested with bios 0231 and also latest BIOS from asus website, it worked 2 or 3 time out of 100 tries and that simply is not enough for such a good oc board

  • Like 1

Share this post


Link to post
Share on other sites

try to run without RSVD and set all voltages manually. BIOS 0057 seems to be a little buggy. i tried different cpus on 0057, one does have a bad CBB from -70 at retry, Bios 0043 works slighly better, same CPU comes back at -170 and runs a few Mhz higher in the top

  • Like 1

Share this post


Link to post
Share on other sites

Caseking shows an availability date of Feb 5th, 2019. Maybe something will pop up stateside around that time. 

 

  • Thanks 1

Share this post


Link to post
Share on other sites
12 hours ago, bigblock990 said:

Does anyone have an ETA for XI Apex availability in USA?

send me a z390 dark from us as a gift and i send you an xi apex as a gift :D

  • Haha 1
  • Confused 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×