HWBOT Software and Apps

I did some software re-installs on my machine recently and found a small oddity with the Intel Open CL versions and the GPUPI 3.2 1b benchmark for CPU. If you run GPIPU 3.2 with the Intel OpenCL 3.0 executable (for me, it failed every single time after step 4), even though I knew my rig was stable and had run this benchmark before, so I checked my screenshots of the past, to verify settings. When I looked at the actual GPUPI 3.2 executable in my failed runs, it showed Allocated Device Memory: 80mb When I looked at the successful runs I had done in the past, it showed Allocated Device Memory 335.56mb At this point I noticed I had OpenCl 3.0 …

Hello, Gentlemens. Can someone help me? I need these software to perform professional overclocks.(ThermSpy Version 3.3) and (GOC_2018_HOF_V2.0.0.5_Master_Version) MaaxMem2 updated.? Thank you very much.

hello yesterday i check my submission data is not displayed it Recently uploaded records are not visible.how to do that ?

I'm trying to run X265 on a Celeron 1000A but the program is giving the HPET error. There are results for this CPU in this test in the hall of fame, and in a weird board no less, so I would assume there's something I can change. I've looked through the BIOS but nothing stood out to me.

I'm benching an old ATi X1300 right now and I've had a rather unique problem while trying to benchmark Heaven. All other benchmarks run fine, card wasn't even overclocked at this point. Driver is Catalyst 8.9 on Windows XP 32 bit. Rest of system: 7600K@5.3GHz, 16GB DDR4 3200 CL15, Asus Z270F Strix Gaming. Only thing I can think of is this: I used the old BenchOS that I set up with my Z270 Apex. I didn't get SMBus, PCI-E, NVME or USB drivers installed for this other board (but as I said, everything else works perfectly). Maybe that has something to do with it. Any hints?

It says Invalid data file: No score found in heaven output! This is a bug, please report to dev@hwbot.org. I am running the version from the rules page. Thanks, I attached the file. 10732.hwbot

https://hwbot.org/benchmark/hwbot_x265_benchmark_-_4k/ Download link on that page links to https://mega.nz/file/M8802J5I#PMRS0Ynen4eJP9Kv0kfsTcDnJKNLh3By_tWLJa9Nhdo However on the rules page https://hwbot.org/rules?referenceId=5247 if you click the version url ^ there it leads to http://hw-museum.cz/data/hwbot/HWBOT_X265_2.3.ZIP The mega link will NOT properly export or save files *FOR ME*, but the hw-museum one will, however it is on an unsecured FTP site (thankfully all the file update dates are identical) In a perfect world all benchmark links would be normalized to have the same url or at worst a mirror backup link (or 3), and…

Anyone else experiencing an installer error when using the latest from benchmate.org? I choose "For Everyone" --> "Complete" and then it gives me this: Any ideas? Marco

I just ran the latest Storage Benchmark from Ul benchmarks and found the information displayed a bit scarce versus other outputs of the 3DMark series. Take eg no temperature output of the tested Storage device ( this could be an ideal indication if throttling occured and/or beter cooling is required No detailed overview of the storage performance on any the 7 test runs, this could also show if any cache or other software is installed to boost the score. ....

Can anyone have a free version of Setfsb 2.3.17x version? Thanks in advance

I reloaded to confirm, other benches have other errors too.

I have a AM4 system. How do you add geekbench to Benchmate? When I try to add it to BenchMate it fails.

Clicking on the button "Analyze on HWBOT" I obtain a cropped screenshot loaded on HWBOT. The resolution of my screen is 4k, maybe is that the problem? Thanks in advance!

Hello, I am trying to import a benchmark profile to use to tweak my system, however it keeps saying " The profile does not match your current processor. It cannot be imported" Yet the profile appears to have the same processor as mine. (i9 10980xe ) I tried others and the same thing. Any suggestions? Thanks! Lou

Why always this error? Fresh W7, stock clocks, fresh bench download from HWB.

Just did some ycruncher subs and I noticed that the datafile didn't include a screenshot and actually went as far as to tell me that screenshot is not required when I went to sub. Are these subs legal? https://hwbot.org/submission/4339224_yosarianilives_y_cruncher___pi_25m_athlon_ii_x4_640_(zosma)_4sec_482ms https://hwbot.org/submission/4339250_yosarianilives_y_cruncher___pi_25m_athlon_ii_x4_640_(zosma)_5sec_80ms https://hwbot.org/submission/4339225_yosarianilives_y_cruncher___pi_1b_athlon_ii_x4_640_(zosma)_5min_10sec_199ms https://hwbot.org/submission/4339251_yosarianilives_y_cruncher___pi_1b_athlon_ii_x4_640_(zosma)_6min_3sec_690ms https://hwbot…

Hello OCers, since testing Threadripper 2950x my HWBOT x265 /any version/ is unable to collect data - quits on save validation file. I thought it was due to TR II 2950x problem but now I have the same issue on i7-6800k - pretty old. It cannot send data to HWBOT either. Java runtime is up to date. Windows are up to date. All drivers are up to date. Have anyone experienced the same issue? HPET is on. ...

Hi I started benching 3DMark 2000 but cannot find the result browser anywhere. Rules say result browser must be open but my System says it cannot find it in the Installation. Where can I download it?

Hey guys. Got a problem with the HWbot version of heaven. If i run the HWbot launcher for heaven using nvidia cards and run the basic benchmark it freezes a few seconds into the 8th scene or at the start of the 7th but the system is still somewhat responsive. If i run it with AMD cards the benchmark freezes on the startup loading screen and the system is still somewhat responsive but if i run the extreme benchmark through the hwbot launcher its fine using either amd or nvidia. If run it using either nvidia or amd from the normal heaven launcher and use the basic settings it runs fine and doesnt freeze at all. I have tried this in windows 10 and windows 7, with different c…

Hi Folks, struggling with this guy, which does not allow to set the absolute mode on my rig for some reasons. ever had the sisue? http://hwbot.org/benchmark/hevc_h.265_decode/ thanks

Hello everyone, I see that many members are using the Geekbench 3.4.2 version, but I can't find it anywhere for downloading. I would appreciate it if someone can share it. Thanks

Hi, I got a bugged x265 result on Ryzen: unityofsaints`s HWBOT x265 Benchmark - 1080p score: 41.83 fps with a Ryzen 5 1600 Usual FPS for those clocks would be 30 - 31. I can provide the datafile to whoever needs it.

Searchs a tool he make my 1080ti always 3d boost in old benchmarks . My 1080ti dont boost at 3dMark2005 or 2006. @ Windows 8.1 ir 10 Please help

lo all, I seems to constantly fail to get either GPUPI 3.2 to save the result file or even getting one loop out of GPUPI 3.3.3 before it crashes I have tried Win7 SP1 (HPET on or off) , Win8.1 and even Windows 10. (also enabled all the services, no go) Tried 2 different biosses on the Rampage IV board, Tried 3 different CPUs, Tried OC or stock Issues with both the AMD SDK or Intel OpenCL 1.2 Tried all settings with the build in tool, no improvement For GPUPI 3.2 the 3.1.1 is almost as fast so that's my backup. However for 3.3 the Legacy version 3.3.2 is way slower sigh.... I have experienced this on some other platform…

hi ** Processing Power ver1.2.2 2014 ** Download: https://community.hwbot.org/applications/core/interface/file/attachment.php?id=5614 CPU power measurement , support more than 250 threads for computing a complex process that include: -Numbers -Strings -encoding -decoding -thread management - ... // Only Requirement Microsoft .NET Framework 4 Client Profile Download links: http://www.microsoft.com/en-us/download/details.aspx?id=24872 http://www.softpedia.com/get/Programming/Other-Programming-Files/Microsoft-NET-Framework-Client-Profile.shtml *** re…