Memory Heaven (air/extreme)

hi guys. i have this kit g.skill kit F3-2400C9D-8GTXD 4x4gb 9-11-11-31-2N 1.65v and i want to try some extreme cooling with a peltier. will be possible to achieve 2400mhz cl8 or cl7 with this kit with temps (if achievable) around -20/-30°C ? i know that the imc plays a big role,but still curious,probably will try to cool the cpu with a peltier too because it's a low tdp cpu 65w,when overclocked won't go over 90/100w. also what power consumption this ram kit can have with let's say 1.7/1.75v?this info will help me to choose the peltier. thanks

Hey all, Since Bull is playing with other boards right now I figured I'd share my journey with this board. I received it yesterday and just got a few minutes to tweak before I had to call it a night. Using BIOS F5 (newest), there are still a few things to iron out. Issues (possibly user error, still new to the board): RTL and IOL 55 every time I touch them, even if I set them to the same values it had set automatically. EDIT: I've been told this may be due to setting just RTL and leaving IOL on auto. Will verify this evening if setting them both manually fixes the issue. tCWL was unbootable at 9, which many others are running at much higher frequencies tW…

Hi, I have a 3x2Go F3-12800CL6T-6GBTD with "640" elpida chip, I managed to overclock it to 2400 7-10-7-20 1T 1.85V (air cooled) in dual channel with my 3770k (not so roxxor, 5G for ~1.45V) on my P8Z77-V, I can't tighten the timing more than that, I can't push it to 2500 with BCLK overclock (CPU at 4GHz), 2600 won't boot at all. With the same CPU but an other motherboard (MSI Z77A-G45), I managed to push an other kit (2x4Go 1600C9) to 2840 C12. Do you think my CPU or even my motherboard are limiting me to push more that kit? Should I upgrade to Maximus V gene, formula or extreme, which is better? Thanks for all

Hey guys! I have g.skill ripjaws v 3600 cl16. currently booted up with: 3600mhz, CL 14-14-14-34 1.4v DDR (1.392v in windows). VCCIO 1.18V VCCSA 1.19V I'd like to get it stable, but i don't understand well all these "trc" "Twcl" and such, please some help here's an image: By the way, for 24/7 safe use.

Hi, been lurking around here a bit. I figured I'd try here and see if anyone could advise me. System: i7-7700k@50x w/45x cache, offset 160, LLC2; AVX load 86 degrees max w/1.38 vcore-no delid AsRock z270 Taichi Corsair Vengeance 3466mhz RGB 2X8GB PC4 27700, B-die, XMP enabled, 1.35volts, changed from 3466 to 3600, max load pulls 1.37 Corsair RM850i Evga 1080 FTW Samsung Evo Pro 950 500gb Corsair H105 I can't bring my LLC or Vcore any lower, without losing stability in OCCT. I can't lower the dram voltage without losing stability in OCCT. This particular overclock will be used for 24/7 for gaming, 4k raw video and hi res raw image processing, web, blah bl…

I gave these Corsair's Dom GT 2000c8 v7.1 psc kits which successfully passes 2600 8-12-8 spi 1m and 2570 8-12-8 32m at 1.82v on FX 8350 and ASUS 970 Aura. With the g3258 and MVII even the 2400 with 8-12-8 gives 00 and reboot loops . I have tried +0.1-0.3v sa and for io 0.1-0.3 (both digital and analog). I enabled additional DRAM Training option too. VTTDR is set half of dram voltage (1.7-1.85) . I disabled MRC fast boot option too. Is this epicly bad imc or board (the CPU is a x6 vn batch)😢

Hi all,is that time again new platform and lots more cold memory action ahah Had this platform for little over 2 weeks,so it's still all new to me,I did finally run some cold memory's for the first time yesterday.Will continue to post many more results as I learn this new platform,will also try to post from different ics,AU is little limited on the new memory's atm The new Z170 OCF once again was really nice to use,Nick has done a great job on the board and bios once again Hynix 3736Mhz 11-15-15-28 46-48 rtls 4-4 iols

Hey, I did a boat load of research trying to figure out how to OC memory and apparently everyone loves Samsung B die. I guess Samsung E die is supposedly tier 2? Does anyone know how good the Chinese eBay Samsung B die stuff overclocks? Sample link: Samsung 16GB 2x8GB DDR4 2133Mhz PC4-17000 288pin Desktop Memory Non-ECC RAM 1Rx8 | eBay Also, is there somewhere with more information on what dies RAM are? I can only find super basic info. It seems that cheap Hynix kits at 3200Mhz are usually 16-18-18-38, and Samsung kits are usually around ~$160-170, and have a separate set of timings? It seems that the most common kits of B die are the Corsair Vengeance…

Does anyone know what age chips are usually stronger? Looking for some backup benching / daily RAM

Not just the GSKILL kit, it's across the (DDR4) board. Looks like supply is ramping up right in time for Skylake! :celebration:

Hiya Folks! Been going through a lot of older ddr3 and, much to my chagrin, quite a few are dead-ish. They throw 10 or 26 errors (on a z97ocf) or send the board in to constant looping. Is there any way to possibly revive them? Someone here said to remove the heatsinks, soak them for a couple hours in isopropyl alcohol then bake them in the oven for about a 1/2 hour at 50C. Does that sound right? Is the temperature correct (don't think my oven allows setting such a low temp)? Is it even possible that this could work? Anyone here successfully brought the dead back to life? Appreciate any tips, guidance, etc. Figure I'll try a crappy, disposable stick or 2 …

hi, i buy today this kit off mushkin , i wonder iff they are really good overclokers and iff anyone has one memory off this brand that can share opinion. thank you here´s a pic off the box: http://i.ebayimg.com/images/g/BiMAAOSw241YbqTn/s-l1600.jpg this some photos off the chip :number on mem chips XDY771A3G-A https://z-m-scontent.xx.fbcdn.net/v/t35.0-12/16196624_10209541213185320_774033455_o.jpg?_nc_ad=z-m&oh=163815e15751b72d9cb643e0c995e01f&oe=58857449 https://z-m-scontent.xx.fbcdn.net/v/t34.0-12/16215544_10209541212225296_1037961539_n.jpg?_nc_ad=z-m&oh=0a8acddcc6dba703d71efa5e8e6b1009&oe=5886773E

Hi I found a cheap E die kit that seems to do nice (not top notch). It is a kit from Samsung as a manufacturer with E die on it. I found it here on page 7: http://www.samsung.com/semiconductor/global/file/product/DDR4_Product_guide_May15.pdf When I looked for the chip codes I found that these are on some 3866MHz and 4GHz sets (1 from G.Skill). The kit is rated as 2133MHz with E die. After some tests I found that it is possible to boot (to Win 7) at 4GHz with 1,45v. These sticks go by €20 a piece. So in my book this is a bargain... Just to share this with you. Note: Since my OCF has some issues I won't be able to…

Hi guys. Prompt, which limit the voltage can be used for these brackets with good air cooling. The fact that not familiar with these chips. Thanks...

G.Skill F3-2666C11D-16GTXD Bench Review Click me for full specs Insert cool intro about haswell imc being fun, and the current state of memory. : Nah im just playing. It really is blast, even for memory benching hipsters that were freezing mems before it was cool. :clap: Crazy to see these new chips unlock the potential that as hidden before in so many kits of ram. On to the benching. Test Setup: ASRock z87 m-OCF 4770k random retail -48c SS by RunMC Kingpin Dominator mem pot (old school ftw) ASUS 6600 GT (again old school ftw) G.Skill F3-2666C11D-16GTXD 2x8gb kit Trident X Little shot of the sticker, hot off the production line (atleast the s…

Good Day So I got some memory 2 or 3 weeks ago it is these 404 - File or directory not found. I would Like to know how should i set them up as far as tweaking them or getting the best out of them with my motherboard this https://www.asus.com/Motherboards/Z97C/ Also I cant seem to find Latency in the Bios Thank you

Hello everyone, I made this thread in order to share my experience regarding the ultimate DDR4 kit for overclockers made by Galax. As many, I bought the HOF card ($430 + $160 customs) + the OC Lab mems ($350) in order to participate on the GOC competition, hoping to qualify for the finals. In order to do some testing, I got a friend's Galax OC Lab kit that did 4000~ 12-11-11 with wazza @2v. At this point, I thought it would be ideal to order my own even tho my friend wouldn't participate (eventually he sold his kit to another participant). When I received the new kit from Galax, I tested the same profile on the same cpu & mobo, as I did on the previo…

Hi guys, i really need your help... Actually my config is: I7 5960x Gold 4.5ghz@with 1.1v cpu vcore only with H100i. Asus X99M-WS with the new bios 3005. PSU Corsair AX1200i. And this bad kit 4x8GB Ripjaws V Black 3200 C16-16-16-36-1T, but i cant hit more then 2500mhz C11 with 1.7v this chip E-DIE is the worst for my cpu. My PC never boot/start when i try clocks higher then 2550mhz even with voltage in 1.8v, SA 1.250v, I/O, PCH in 1.1v and high timmings like 20-28-28-46-2T (I tryed), the pc never start. So i would like to buy this kit 4x8GB Corsair Platinum Dominator code -> CMD16GX4M2B3000C15 V4.24 is B-Die, i know the version V4.23 is B-DIE (samsu…

Hey Guys I want to thank everyone (Rauless009, Leeghoofd, GtiJason and many more) that helped me and taught me everything in Tweaking the Mem Timings. Noob Here ..still learning I've manage to hit the 740 Marks at XTU using the i3 6320 but Im stuck, cant do more. I've run XTU over 742 times lol Currently using the Asrock Z170 OC Formula, Win 10 32bits, and the B-Die GSKILL 3200C14Q-32GTZ. These are my timings: And here is my CPU: Any help would be really appreciated. Max.

Guys, my friend provided me with some old SDRAMs (for the over 256MB attempt on i430TX chipset - Asus TXP4-X) and two of them are these rams: I did not managed two machines I tested these in (Asus TXP4-X, MSI K7TM Pro) to post with them, I could and probably will test others SDRAM-capable mobos (JetWay V266B, PCchips M810LR), but the chance are IMHO minimal. IMHO these are ECC rams. Anyone seen that rams? It is mainly the double-stacking that get me interesed, because I never seen anything like that yet. They stack like HBM rams, lol So, there it is for your enjoyment and maybe someone could identify these...? Don_Dan, Strunkenbold, Jazzman or o…

Anyone have any experience with this kit? Have it at 13-14-14-34-1T@1.42v. I'd like 2666mhz @ C13 or C12. Just curious if anyone has any tips from experience. What kind of voltage is safe for 24/7 use on air? I see people mentioning 1.65 and up, seems like a lot to me. Thanks!

Now that we're well into Autumn over here in NSW Australia I decided it was time to tighten the living s##t out of my memory modules (CMK16GX4M4B3000C15). After 2 days of tweaking/testing I reached the following timings: And here are the benchmark results: After updating the mobo's BIOS to the latest revision, the PC couldn't complete POST. I Added 10mV to RAM; POST now completes, but there are errors during test 7 of memtest. Changed tRFC from 300 to 304; errors don't occur until test 13. Changed tRC from 8 to 9; no errors after 4 passes. Subtracted 10mV from RAM; no errors after 4 passes. Played with a few timings and managed to reduce tWTR from 4 to 3. …

Hello, I would like to find again timing table website or pdf for G.skill F3-2133C10-8GXM. My motherboard should support XMP but ranges go over capabilities of my motherboard so spend 3 hours searching internet for complete timing but now I cannot find it anymore. My only clue for that website or pdf is this picture which I took with my phone to apply settings in bios with trial and error: The problematic part was tRFC, my bios has limit for it 255 (8 bit integer).

Right now I'm running my dominator GT v7.1 sticks at 1.92v (bios set voltage) on air. Is this too much, or can they handle high voltages very well? I don't want to damage them.